Winchester Model 70 Featherweight .300 Win Mag 24 in Walnut RH
About this product
The Winchester Model 70 Featherweight .300 Winchester Magnum is a controlled-round feed bolt-action rifle featuring a cold hammer-forged 24-inch free-float barrel and a premium walnut stock, built for long-range hunting and extended backcountry use. It continues a legacy of mechanical reliability with modern trigger refinement. The specific .300 Win Mag chambering makes it a candidate for elk, moose, and bear across North American mountain ranges.
What is the Winchester Model 70 Featherweight used for?
The Model 70 Featherweight is used for long-range hunting of large game in open or mountainous terrain. The .300 Winchester Magnum cartridge generates over 3,500 ft-lbs of muzzle energy and retains enough velocity for ethical kills at distances exceeding 500 yards. This power and the rifle's 7 lb 4 oz weight make it ideal for western hunts where a single shot may be your only opportunity.
How does the Winchester Model 70 Featherweight compare to the Stevens 334?
The Winchester Model 70 Featherweight offers superior mechanical extraction and controlled feeding compared to the Stevens 334 rifle, which uses a simpler push-feed action. The major difference is that the Model 70's claw extractor positively controls the cartridge from magazine to chamber, a critical advantage when shooting from an angle or during rapid bolt manipulation, while the push-feed system of the Stevens 334 is more prone to dropping a round if the rifle is jarred. The Winchester's M.O.A. trigger is also a significant step up in adjustability and feel from the Stevens' standard unit.
What does it weigh and what are the dimensions?
The rifle weighs 7 pounds, 4 ounces (3.29 kilograms) without optics or sling. Its overall length, measured from the buttplate to the muzzle crown, is 44.75 inches, with the barrel contributing exactly 24 inches of that length. This gives it a nearly perfect 1.65:1 overall length-to-barrel ratio, optimizing balance and handling in a field-ready package.
Who is this NOT for?
This is not for a first-time centerfire rifle shooter or someone on a tight budget for both rifle and ammunition. The .300 Win Mag recoil is sharp, generating over 25 foot-pounds of rearward force, which can develop a flinch in inexperienced shooters. Furthermore, practice ammunition typically costs over $3.00 per round, making high-volume training prohibitively expensive compared to a cartridge like .308 Winchester. A new shooter would be better served by the milder Stevens 334 in .243 Winchester.
What's in the box?
Inside the box, you will find the rifle, two steel sling swivel studs pre-installed on the stock, a detailed owner's manual covering disassembly and the M.O.A. trigger adjustment procedure, and a factory test target. Notably, the box does not include scope base mounting hardware or rings; you will need to purchase those separately to match your preferred optic.
Is the Winchester Model 70 Featherweight worth it at $1222.99?
At $1222.99, the Winchester Model 70 Featherweight is worth the price for a hunter who demands mechanical reliability from a controlled-feed action and the aesthetic of a genuine walnut stock. The investment is justified by the combination of a cold hammer-forged, free-floated barrel and an adjustable, zero-creep trigger—features not found on budget rifles. You are paying for a tool with a 70-year legacy of reliable function that will maintain accuracy and value for decades with proper care.
Specs at a glance
Video review
Pros & cons
What works
- Controlled Round Feed (CRF) action provides positive, reliable cartridge extraction critical for dangerous game or off-angle shots.
- M.O.A. Trigger System offers zero take-up, zero creep, and zero overtravel—factory set to a crisp 3.5-pound pull weight.
- Cold hammer-forged 24-inch free-floated barrel resists fouling and maintains consistent accuracy across hundreds of rounds.
- Weighs 7 lb 4 oz—nearly a full pound lighter than many comparable .300 Win Mag hunting rifles with walnut stocks.
Trade-offs
- The Grade I walnut stock lacks a modern recoil pad; the included hard plastic buttplate transmits significant recoil from the .300 Win Mag cartridge.
- No optic mounting hardware included—you must purchase bases and rings separately, adding $80-$200 to the total setup cost.
- Blued metal finish is traditional but requires diligent maintenance to prevent rust in wet or humid hunting conditions.
Expert review
Key attributes
| upc | 048702002274 |
| manufacturer | Winchester |
| manufacturer part number | 535200233 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel finish | Brushed Polish Blued |
| barrel length | 24" |
| caliber/gauge | .300 Winchester Magnum |
| capacity | 3 |
| color | Black |
| length | 50.1000 |
| model | M70 |
| number of magazines | 1 3 rd. |
| package height | 3.7 |
| package width | 9.7 |
| product type | Rifle |
| safety | 3 Position |
| shipping weight | 8.35 |
| sights | Drilled & Tapped |
| units per box | 1 |
Frequently asked questions
- Is it compatible with a muzzle brake or suppressor?
- Yes, the 24-inch barrel features standard 5/8-24 threads at the muzzle, allowing direct threading of muzzle devices or suppressors. Ensure any suppressor is rated for .30 caliber magnum pressures and has a compatible mounting system. Note that adding a suppressor will increase overall length by approximately 6 to 8 inches.
- Does it fit in a standard 50-inch rifle case?
- Yes, the rifle's 44.75-inch overall length will fit easily into any standard 50-inch or 52-inch takedown rifle case with room for a scope mounted on low or medium rings. For travel in a hard case with foam, plan for an external case length of at least 48 inches to ensure safe clearance.
- How long does shipping take if purchased online?
- Shipping to an FFL dealer for this rifle typically takes 4-8 business days from order processing, depending on your location and carrier service. Once it arrives at your chosen dealer, you must complete the mandatory ATF Form 4473 background check, which can add another 15 minutes to several days depending on state laws and NICS status.
- Does this work with a Picatinny rail scope mount?
- Yes, the receiver is pre-drilled and tapped for a scope base. You will need to purchase a separate one-piece Picatinny rail or two-piece base specific to the Winchester Model 70 long action. I recommend using a quality base from EGW or Warne, secured with Loctite 243 on the screws, to maintain zero under heavy recoil.