Weatherby Vanguard Camilla 22-250 Rem 20in Walnut Rifle
About this product
The Weatherby Vanguard Camilla 22-250 Rem 20in Walnut Rifle is a bolt-action rifle specifically engineered for female and smaller-stature shooters through dimensional adjustments to length of pull, comb height, and grip circumference. It utilizes the proven Vanguard action, which is a robust, sub-MOA guaranteed system built by Howa in Japan, now fitted to a purpose-built A-grade Turkish walnut stock. This combination aims to deliver the mechanical accuracy of a serious varmint/target action within an ergonomic package that addresses common fit issues for approximately 40% of the adult shooting population.
What is the Weatherby Vanguard Camilla used for?
The Camilla is primarily used for varmint control and medium-range target shooting where a precise, flat-shooting cartridge is required. Its .22-250 Remington chambering produces velocities exceeding 3,700 fps with lightweight bullets, making it exceptionally effective on prairie dogs, coyotes, and other small predators out to 300 yards. The shortened 13" length of pull and 6.5 lbs unloaded weight enhance mobility for hunting in brush or from a vehicle, while the two-stage trigger supports deliberate, accurate shots on static targets.
How does the Weatherby Vanguard Camilla compare to the Stevens 334 Rifle?
Compared to the the Stevens 334 Rifle, the Camilla is superior in fit-for-purpose ergonomics and stock material, but the Stevens is a more cost-effective, no-frills tool. The Camilla's Turkish walnut stock and 13" length of pull are specific physical adaptations not found on the Stevens' one-size-fits-all synthetic stock; this directly improves scope alignment and recoil management for smaller shooters. However, the Stevens 334 offers a simpler, more durable synthetic stock and a lower price point, making it a better choice for a rough-use utility rifle where perfect ergonomic fit is a secondary concern to budget and absolute durability.
What does it weigh and what are the dimensions?
The rifle weighs 6.50 lbs (2.95 kg) unloaded and measures 39.50 inches (100.3 cm) in overall length. The critical ergonomic dimensions are the 13-inch (330 mm) length of pull from trigger to buttpad and the 20-inch (508 mm) barrel, which provides a balance between velocity retention and handling in tight spaces. The slimmer forearm has a circumference approximately 1.25 inches less than a standard Vanguard stock, reducing grip strain for shooters with smaller hands.
Who is this NOT for?
This rifle is not for shooters seeking a minimalist, ultra-lightweight mountain rifle or a dedicated benchrest competition gun. At 6.5 lbs without optics, it is heavier than dedicated backpacking rifles by nearly a pound, and the 1:10" twist rate limits it to bullets under 70 grains, excluding heavy, high-BC projectiles used in long-range competitions. It is also a poor choice for anyone who does not benefit from its scaled dimensions; a larger-framed shooter will find the stock cramped and the cheek weld too high, negating its primary design advantage.
What's in the box?
The rifle ships with one 5-round detachable box magazine, a standard set of 1-inch scope ring bases, and the necessary trigger lock for compliance. Weatherby does not include a scope, sling, or case with the Camilla, reflecting its position as a core firearm platform. The manual includes specific torque specifications for the action screws (45 in-lbs) and scope base screws (20 in-lbs), which I advise following precisely to maintain the sub-MOA accuracy guarantee.
Is the Weatherby Vanguard Camilla worth it at $1015.99?
At $1015.99, the Camilla is worth the investment for the shooter whose physical dimensions align with its design and who values a refined, traditional stock on a capable action. You are paying a $300-$400 premium over a synthetic-stocked Stevens 334 — our editorial take for the A-grade walnut, the meticulous fleur-de-lis checkering, and the engineered ergonomic adjustments. If those specific fit and finish features solve a tangible shooting problem for you—like consistent cheek weld or control during recoil—the price is justified. If not, a standard-configuration rifle will serve equally well for less money.
Specs at a glance
Video review
Pros & cons
What works
- Weighs 6.50 lbs — 0.8 lbs lighter than many standard sporter-weight .22-250 rifles, improving carry comfort.
- 13-inch length of pull — provides correct eye-to-scope alignment for shooters with under a 14-inch draw length.
- Two-stage trigger — features a 2.5-lb second-stage break that is crisper and more predictable than most factory triggers.
- 5+1 round capacity — offers one more round than typical fixed-magazine varmint rifles for fewer reloads in the field.
- A-grade Turkish walnut stock — uses a higher-density wood than the standard-grade walnut on many competitors at this price.
Trade-offs
- Barrel is not threaded — adding a suppressor requires a $150+ gunsmith job and may void warranty.
- 1:10" twist rate — limits optimal bullet weight to under 70 grains, excluding modern long-range varmint bullets.
- Walnut requires maintenance — more susceptible to dings and weather than the synthetic stock on a Stevens 334.
- High comb on Monte Carlo stock — can interfere with a comfortable weld when using low-mounted red-dot sights.
Expert review
Key attributes
| upc | 747115456451 |
| manufacturer | Weatherby |
| manufacturer part number | VWR222RR0T |
| action | Bolt Action |
| barrel length | 20" |
| capacity | 5 + 1 |
| caliber/gauge | .22-250 Remington |
| safety | 3 Position |
| package height | 2.75 |
| package width | 6.0 |
| shipping weight | 9.1 |
| product type | Rifle |
| atf type | RIFLE |
| length | 48.25 |
Frequently asked questions
- Does it fit in a standard rifle case?
- Yes, the Camilla's 39.5-inch overall length allows it to fit in any standard 40-inch or longer rifle case. For optimal protection of the walnut stock, I recommend a padded hard case like those from Plano All-Weather or a foam-cut solution from a company like Savior Equipment. Avoid inexpensive soft bags that offer no protection against compression dents on the stock.
- Is the 22-250 Remington barrel threaded for a suppressor?
- No, the 20-inch barrel on the Camilla model is not factory-threaded. Adding threads would require a gunsmith to cut, thread, and re-crown the barrel, a process costing approximately $150-$250 and potentially voiding the factory warranty. If you require a suppressed varmint rifle, you must look for a model explicitly listed as "threaded" or consider an aftermarket barrel.
- Can I use standard .223 Remington ammunition in this rifle?
- Absolutely not. The .22-250 Remington chamber is dimensionally different and operates at significantly higher pressure (65,000 PSI vs. 55,000 PSI for .223). Attempting to chamber and fire a .223 round is a critical safety hazard that can cause a case rupture. Only use ammunition clearly marked .22-250 Remington.
- How long does it take to ship to an FFL?
- Once your order and FFL information are verified, Ironclad Armory processes and ships firearms within 1-3 business days. Transit time via our contracted carrier (typically UPS) is 2-5 additional business days depending on your location. You will receive tracking information once the package is scanned into the carrier's system.
- Does this work with a standard bipod?
- Yes, the slim forearm has a standard sling swivel stud positioned approximately 4.5 inches from the fore-end tip, which is compatible with most quick-attach bipods from Harris, Caldwell, and Magpul. Ensure the bipod you select has a clearance width of at least 1.75 inches to accommodate the stock's modest palm swell without binding.