Weatherby Mark V Apex 25 Creedmoor 22-inch Coyote Tan
Video review
Expert review
About this product
What is the Weatherby Mark V Apex 25 Creedmoor 22-inch Coyote Tan? It's a 6.5-lb, 22-inch fluted-threaded bolt-action rifle chambered specifically for the 25 Creedmoor cartridge, designed for precision engagement at distances exceeding 600 yards. Based on Weatherby's flagship Mark V action known for its strength and 54-degree bolt lift, this Apex model integrates components like a TriggerTech trigger and Accubrake ST muzzle device from the factory, eliminating the need for immediate aftermarket upgrades for the serious shooter. While its price point pushes it into 'investment' territory for casual hunters, its feature set is engineered for performance where mechanical consistency matters more than cost.
What is the Weatherby Mark V Apex 25 Creedmoor used for?
The Apex is purpose-built for precision rifle applications where wind drift and terminal energy retention are critical—namely, long-range varmint control (like coyote), medium-game hunting for deer or pronghorn, and entry-level competition in gas gun divisions. Its chambering in 25 Creedmoor delivers a ballistic trajectory similar to the classic 6.5 Creedmoor but with a lighter-recoiling 110-130 grain bullet, which significantly reduces shooter fatigue over 40-60 round practice sessions and maintains lethal velocity out to approximately 850 yards on steel targets. The threaded 5/8-24 muzzle with included Accubrake ST allows for direct suppressor attachment or muzzle brake use, making this rifle compliant and adaptable for both hunting and regulated Title II applications.
How does the Weatherby Mark V Apex compare to the Stevens 334 Rifle?
The Weatherby Mark V Apex is a superior platform for precision work and regulatory flexibility, while the Stevens 334 is a fundamentally budget-conscious hunting rifle. The critical difference is the Apex's pre-threaded 22-inch barrel with a 1:8 twist rate, which is optimized for heavier, high-BC 25-caliber bullets, compared to the Stevens' simpler 20-inch non-threaded barrel with a standard 1:10 twist. The Weatherby's TriggerTech flat-face trigger is adjustable down to a crisp 2.5 pounds and provides a distinct tactile advantage over the Stevens' generic 4.5-pound pull, translating to tighter groups at distance—often yielding 0.75 MOA versus 1.5 MOA average with match-grade ammunition.
What does it weigh and what are the dimensions?
The rifle weighs 6.50 lbs (104 oz) without optics or mounts, and its overall length is 42.5 inches with the 22-inch barrel—this is a full-sized rifle, not a compact or SBR. The graphite-black Cerakote over steel action and fluted barrel shaves weight from the front end, while the fixed Peak 44 Bastion stock contributes a rigid, non-adjustable platform; for comparison, a typical chassis system like a MDT ESS adds nearly 3 lbs. The magazine well accepts AICS-pattern short-action magazines, resulting in a published 4+1 capacity, though most users will run 5-round or 10-round mags for competition or field use.
Who is this NOT for?
This rifle is not for the budget hunter seeking a general-purpose deer rifle, nor is it ideal for someone new to firearms who might benefit from a more affordable and forgiving platform like a Ruger American. The 25 Creedmoor cartridge, while excellent, has less readily available commercial ammunition than .308 Win or 6.5 Creedmoor, meaning you'll likely need to reload to maximize its potential and cost-effectiveness—a $600 minimum investment in basic reloading equipment. Furthermore, its non-adjustable stock and lack of a full-length Picatinny rail mean you cannot easily customize length of pull or attach night vision without aftermarket parts, a limitation not found on chassis rifles like the Bergara B-14 HMR.
What's in the box?
You receive the complete barreled action in the fixed Bastion stock, one 4-round AICS-pattern steel magazine, the factory-installed Accubrake ST muzzle device (thread protector is not included separately), and the required owner's manual with warranty registration. Notably absent are scope mounting rings, a bore snake, or any basic cleaning kit—expect to spend an additional $80-150 on quality 30mm or 34mm rings and a torque wrench. The box itself is a standard Weatherby cardboard carton with foam inserts; it is not a hard, lockable case suitable for airline travel, which you will need to purchase separately.
Is the Weatherby Mark V Apex worth it at $2599?
Yes, but only if your use case demands its specific combination of a pre-fit threaded barrel, precision trigger, and NFA-ready muzzle from a single, warrantied source. The cost breakdown is significant: a comparable custom barreled action from a smith would run $1800-2200 before adding a $350 TriggerTech, a $150 muzzle brake, and a $300 stock, putting total build cost over $2700 and requiring a 12-16 week wait. However, if your primary hunting involves dense woods at under 200 yards, a lighter and cheaper rifle like the Stevens 334 in .243 Win at nearly a third of the price will perform identically on game, making the Apex's premium features financially unjustified.
Specs at a glance
Pros & cons
What works
- Threaded 22-inch fluted barrel with 1:8 twist rate—ready for suppressors without gunsmithing.
- TriggerTech trigger adjustable from 2.5 to 4 lbs—provides a 0.1-inch crisp break right out of the box.
- Full Mark V action with 54-degree bolt lift—30% faster cycling than a standard 90-degree turn.
- Includes Accubrake ST muzzle device—reduces felt recoil by an estimated 40% compared to a bare muzzle.
Trade-offs
- Fixed, non-adjustable Bastion stock—no cheek riser or length-of-pull adjustment without aftermarket parts.
- No thread protector included—requires separate purchase if not using the brake or a suppressor.
- 25 Creedmoor ammunition selection is limited—fewer than 10 factory load options versus 50+ for .308 Win.
- Cerakote finish on barrel flutes shows wear quickly—expect visible carbon scoring after 200 rounds.
Key attributes
| upc | 747115461547 |
| manufacturer | Weatherby |
| manufacturer part number | MAX01N25CMR4B |
| action | Bolt Action |
| barrel length | 22" |
| caliber/gauge | 25 CREEDMOOR |
| capacity | 4 + 1 |
Frequently asked questions
- Is the barrel threaded for a suppressor?
- Yes. The 22-inch barrel has a 5/8-24 thread pattern under the factory Accubrake ST, which is the industry standard for .30 cal and smaller suppressors. You must first remove the muzzle device using a 3/4-inch crowfoot wrench and appropriate torque bar, then you can direct-thread a compatible suppressor like a SilencerCo Omega 300 or Dead Air Nomad-L.
- What scope mounts fit this receiver?
- The steel receiver is drilled and tapped for a standard Remington 700 short-action footprint, the most common pattern available. I recommend using Seekins Precision or Warne Maxima rings with 8-40 screws, torqued to 25 in-lbs in a cross pattern, to prevent shifting under recoil over 500+ rounds.
- Does it come with a threaded protector or just the brake?
- It ships from the factory with only the Accubrake ST muzzle device installed. Weatherby does not include a separate thread protector. You can purchase a basic 5/8-24 steel protector from companies like Liberty Suppressors for about $15, or run the rifle with the brake removed only if you are confident in protecting the unprotected threads from damage.
- Can I use standard .308 Winchester magazines?
- No. This rifle uses AICS-pattern short-action magazines specifically cut for the 25 Creedmoor/6.5 Creedmoor family. While .308 Win magazines share the same external dimensions, the internal feed lip geometry is different and will cause feeding malfunctions. You must use magazines labeled for 6.5 Creedmoor, such as those from Accurate-Mag or MDT, which typically cost $40-60 each.