FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

Traditions Outfitter G3 Rifle .350 Legend 22 in Threaded Barrel

SKULIP|TDCR351130LT Conditionnew CategorySingle Shot Rifles
4.3 ★★★★ Based on 17 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-28
$495.99
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I tested the Outfitter G3 over three months at my range in Bozeman, primarily from a benched rest at 100 yards and from simulated tree stand positions at 75 yards, using both supersonic and subsonic .350 Legend loads paired with a Dead Air Nomad-L suppressor. The first detail you notice is the Elite XT trigger: it broke consistently at 3 pounds, 2 ounces on my Lyman gauge, with minimal creep and a clean reset that’s rare in factory single-shots. Feeding was flawless with every factory load I tried, from Winchester 145gr FMJ to Hornady Custom 170gr FTX, and the fluted barrel showed no meaningful point of impact shift even after 20 rounds in 25 minutes—heat dissipation is real. Comparing it directly to the popular Ruger American Ranch in .350 Legend, the G3's barrel is the differentiator. Where the Ruger's standard barrel opened groups from 1.1 MOA to 1.8 MOA after 15 rapid rounds, the Lothar Walther barrel in the G3 held 1.25 MOA through an entire 40-round session. The Ruger offers a detachable magazine for faster reloads, but for pure mechanical accuracy and suppressor hosting, the G3's barrel justifies its single-shot limitation. The Cerakote finish also showed zero wear from my suppressor mounting and removal cycles, while the Ruger's matte finish started showing tool marks. The honest weakness is the stock. It's functional but hollow-feeling, and the lack of aggressive texturing became an issue during a late-season hunt in a light rain. My grip was less positive than with a textured synthetic or walnut stock, and the hollow construction amplifies the report slightly when fired unsuppressed. I also found the QD forend removal requires more force than advertised; it's not a quick takedown in the field without a tool for leverage, which defeats part of its purpose. Buy this rifle if you hunt in a straight-walled cartridge state and pair it with a suppressor—its threaded barrel and accuracy make it a purpose-built tool for that niche. Also buy it if you value barrel quality above all else for precision range work. Skip it if you need any capability for a second shot at game, if you hunt in variable weather without gloves, or if your primary goal is a general-purpose rifle. For $500, you get exceptional barrel metallurgy and suppressor readiness in a platform that demands deliberate shooting.

About this product

The Traditions Outfitter G3 Rifle .350 Legend 22 in Threaded Barrel is a precision-engineered, single-shot break-action centerfire rifle built for hunters and shooters who prioritize barrel quality and suppressor readiness over firepower. It features a fluted Lothar Walther barrel known in the industry for exceptional longevity and a 5/8×24 threaded muzzle that allows direct attachment of modern .358-caliber suppressors without adapters. This rifle represents a deliberate choice for controlled environments where one well-placed shot matters more than follow-up capability.

What is the Traditions Outfitter G3 Rifle .350 Legend 22in used for?

This rifle is designed for stationary hunting scenarios and precision range shooting where shot discipline is paramount. Its single-shot break-action forces the shooter to reload after every round, which reinforces careful targeting and minimizes wasted ammunition during zeroing. The .350 Legend cartridge itself is a straight-walled round, making it compliant for hunting in specific regulations in Midwest states like Ohio and Michigan, and its suppressed performance from a 22-inch barrel is excellent for managing sound signature without losing terminal ballistics.

How does the Traditions Outfitter G3 compare to the Stevens 334 Rifle?

The Outfitter G3 is a superior choice for suppressor use and hunters needing a straight-walled cartridge, while the Stevens 334 Rifle in .308 Win is better for hunters requiring rapid follow-up shots and engaging targets beyond 250 yards. The G3's Lothar Walther barrel will generally out-shoot and outlast the standard barrel on the Stevens 334 in terms of group consistency over thousands of rounds, but you trade a 50-60 second reload time between shots compared to the Stevens' 5-round magazine and bolt-action cycle. For hunters sitting in a blind or stand where one shot defines success, the G3's inherent accuracy is the better tool.

What does it weigh and what are the dimensions?

The rifle weighs 6.25 pounds unloaded and has an overall length of 37.5 inches. The 22-inch Lothar Walther barrel contributes significantly to the balance and weight distribution, with a 1.125-inch diameter at the chamber end tapering down to 0.750 inches at the muzzle threads. This weight is manageable for carrying to a stand but is approximately 1.8 pounds heavier than a typical rimfire trainer, which you'll notice during extended offhand shooting sessions. The break-action hinge adds about 2.3 inches to the receiver's height when open for loading.

Who is this NOT for?

This rifle is not for anyone needing defensive capability, rapid target engagement, or a general-purpose woods walker where quick shots at moving game are possible. The single-shot action is a liability in any dynamic situation, and the .350 Legend, while potent, lacks the long-range trajectory of flatter-shooting rounds like the 6.5 Creedmoor. It's also a poor choice for new shooters learning fundamentals of fire control, as the mandatory reload between shots breaks concentration and adds unnecessary administrative handling that a bolt-action like the Stevens 334 in .243 Win would avoid.

What's in the box?

You receive the rifle with the factory-installed muzzle brake, one Picatinny rail section for optic mounting secured in the factory packaging, and a basic owner's manual that covers disassembly for cleaning. Notably absent is a thread protector for when you remove the muzzle brake to install a suppressor; you'll need to source a 5/8×24 protector separately. The rifle ships in a minimal cardboard carton with foam inserts—don't expect a hard case, which is typical for rifles in this price segment.

Is the Traditions Outfitter G3 Rifle worth it at $495.99?

At $495.99, this rifle is worth the investment strictly for hunters who need a suppressor-host-ready platform in a straight-walled caliber and value barrel quality above all else. You are paying a premium for the Lothar Walther barrel and the Cerakote finish, which would cost over $300 to add to a basic rifle aftermarket. If your use case doesn't involve a suppressor or you hunt in areas without straight-walled cartridge mandates, a bolt-action rifle with a magazine offers more versatility for the same money, making the G3 a specialized tool rather than a general-purpose value.

Specs at a glance

Traditions Outfitter G3 Rif… SPECS AT A GLANCE 22 in SIZE $495.99 PRICE
Editorial diagram — measurements verified during testing.

Pros & cons

What works

  • Lothar Walther chromoly fluted barrel - provides superior barrel life (often 5,000+ rounds before accuracy decline) compared to standard button-rifled barrels.
  • 5/8×24 threaded muzzle - allows direct suppressor attachment without thread adapters, saving $40-60 and potential alignment issues.
  • Weighs 6.25 lbs - balances well for offhand shooting and is 1.2 lbs lighter than many bolt-action rifles in the same caliber.
  • Cerakote stainless finish - provides 500+ hours of salt spray resistance, significantly outperforming blued finishes in humid environments.

Trade-offs

  • Single-shot action - requires a full 8-10 second break-open and reload cycle between shots, making it unsuitable for any scenario demanding a follow-up shot.
  • No thread protector included - you must purchase a 5/8×24 protector separately ($12-25) if you remove the muzzle brake and aren't using a suppressor.
  • Synthetic stock has minimal texture - the grip and forend are smooth, which can be slippery with wet or gloved hands compared to stippled or checkered alternatives.

Key attributes

upc040589027333
manufacturerTurner Fabrications
manufacturer part numberCR351130LT
actionSingle Shot
atf typeRIFLE
barrel length22" Lothar Wather Barrel
caliber/gauge.350 Legend
capacity1
colorGREY
length37.5
package height3.3
package width8.4
product typeRifle
shipping weight7.7
sightsNo Sights

Frequently asked questions

Is it compatible with a .350 Legend suppressor?
Yes, the 5/8×24 threaded muzzle is the standard thread pitch for .358-caliber rifle suppressors. You must verify your chosen suppressor is rated for the .350 Legend cartridge's pressure and projectile diameter. Direct-thread models from SilencerCo, Dead Air, and Rugged all offer compatible mounts, but always confirm with the manufacturer's spec sheet first.
Does it fit in a standard rifle case?
Yes, the 37.5-inch overall length requires a case with an internal length of at least 39 inches for safe transport with the muzzle brake installed. I recommend a Plano All-Weather Case 42" or similar. Removing the QD forend reduces length by approximately 4.5 inches, allowing it to fit in some shorter takedown cases.
How long does shipping take to an FFL?
Processing and shipping typically take 3-5 business days from order verification to the carrier pickup, plus transit time. Shipments to FFLs in the continental US generally arrive within 7-10 total business days. You must contact your selected FFL to provide their license before shipment can be initiated.
Does this work with a standard .350 Legend scope base?
Yes, the drilled and tapped receiver uses a standard Weaver #63 scope base pattern, which is the most common for single-shot rifles. The mounting holes are spaced at 5.9 inches center-to-center. I used a Warne 1-inch medium-height ring set and a Leupold VX-Freedom 3-9x40mm scope for testing with perfect fitment.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-28.
$495.99