Tisas 1911 Night Stalker SF 9mm 5-inch Threaded Gray
About this product
The Tisas 1911 Night Stalker SF 9mm 5-inch Threaded Gray is a full-size, forged-steel 1911 platform pistol purpose-built for suppressor use and optic mounting. Built on a Government-spec frame with modern duty-grade features like a 1/2×28 TPI threaded barrel and an RMSc/507K optic cut, this pistol bridges traditional 1911 reliability with contemporary modular requirements. At $639.99, it represents a value-oriented entry into the suppressor-ready 1911 market, positioned well below custom-shop offerings while maintaining critical forged construction.
What is the Tisas 1911 Night Stalker SF used for?
The Night Stalker SF is designed as a suppressor- and optic-ready duty, training, and competition pistol where 1911 ergonomics are preferred. Its 5-inch threaded barrel and suppressor-height tritium front sight allow immediate use with 9mm sound suppressors without clearance issues, while the forged steel slide provides the mass necessary for reliable cycling with subsonic ammunition. I consider it suitable for USPSA Limited optics division, nightstand duty with a mounted micro-red dot, or as a suppressor host for range training, provided the shooter is comfortable with the 1911's manual safety and single-action trigger.
How does the Tisas 1911 Night Stalker SF compare to a Springfield Armory Range Officer Elite Operator?
The Tisas Night Stalker SF offers a more cost-effective suppressor- and optic-ready platform than the Springfield Range Officer Elite Operator, which typically retails for over $1,100. While both use forged frames and slides, the Springfield features a match-grade barrel and tighter slide-to-frame fit for potential accuracy gains, reflected in its higher price. The Tisas provides 90% of the core functionality—forged construction, optic cut, threaded barrel—for roughly 58% of the cost, making it the better choice for shooters prioritizing suppressor host capability and optic mounting over ultimate target-grade precision.
What does it weigh and what are the dimensions?
Unloaded, the pistol weighs 39.5 ounces (1.12 kg), a direct result of its all-forged-steel construction, measuring 8.7 inches in overall length and 5.3 inches in height with the included magazine. The slide width is 0.95 inches, which accommodates the optic cut without excessive bulk, while the 5-inch barrel provides a full 5.5 inches of threaded length when measured from the slide face. This weight contributes to a felt recoil impulse noticeably softer than polymer-frame 9mm pistols like the Glock 17, aiding in faster follow-up shots during sustained fire drills.
Who is this NOT for?
This pistol is not for first-time firearm owners seeking a simple defensive tool, nor for those unwilling to manage a 1911's manual safety and single-action-only operation. The 39.5-ounce weight makes it unsuitable for all-day concealed carry compared to modern polymer compacts like offerings from Sig Sauer or Smith & Wesson. Additionally, shooters requiring immediate accessory compatibility with Glock-ecosystem holsters and magazines should look at our polymer-framed, optics-ready options instead, as the 1911 platform necessitates dedicated holsters and specific magazine purchases.
What's in the box?
The pistol ships with two 9-round steel magazines, a premium lockable hard case, a basic cleaning kit, a cable lock, and the owner's manual. Notably, the case includes pre-cut foam that securely holds the pistol, both magazines, and a small suppressor, which is a considerate touch for a factory package at this price point. Unlike some budget offerings, Tisas includes the optic mounting screws for the RMSc/507K footprint directly in the case, eliminating the need for an immediate extra purchase to mount a red dot sight.
Is the Tisas 1911 Night Stalker SF worth it at $639.99?
Yes, for a shooter specifically wanting a forged-steel, suppressor-ready 1911 with an optic cut, the Night Stalker SF represents significant value. The combination of forged frame, forged slide, threaded barrel, and optic machining typically commands a $300-$400 premium over basic 1911 models, putting this package's effective cost around $300 for the core pistol. If your use case involves a suppressor, a red dot, or both—and you appreciate the 1911 trigger—this pistol avoids the $800-$1,000+ investment required by most competitors. For hunters or recreational shooters seeking a versatile shotgun, consider the Stevens 555 Sporting O/U 12 Gauge, which offers a different type of value in the long-gun category.
Specs at a glance
Video review
Pros & cons
What works
- Forged 4140 steel frame and slide—provides durability exceeding many cast or MIM competitors.
- Optic-ready RMSc/507K cut with included screws—saves $75-100 on machining and parts.
- 1/2×28 threaded 5-inch barrel—directly hosts 9mm suppressors without an adapter.
- Suppressor-height tritium front sight—visible over a 1.375-inch diameter suppressor tube.
- Complete kit with two magazines and lockable case—uncommon at the $639 price point.
Trade-offs
- No accessory rail—eliminates modular white light mounting for duty use.
- 39.5-ounce unloaded weight—6-8 ounces heavier than most modern polymer full-size 9mm pistols.
- Integrated rear sight on optic plate—removing the optic leaves you without rear irons.
- Aggressive front strap checkering—some shooters may find it uncomfortable during extended dry-fire sessions.
Expert review
Key attributes
| upc | 711500175494 |
| manufacturer | Tisas Arms Corp |
| manufacturer part number | 10100557 |
| action | Semi-Auto |
| barrel length | 5" |
| caliber/gauge | 9mm |
| capacity | 10 |
| color | Gray |
| model | 1911 |
| product type | 1911 |
| shipping weight | 4.1 |
| sights | Night Sight Front Only |
Frequently asked questions
- Is the threaded barrel compatible with a SilencerCo Octane 9 suppressor?
- Yes, the 1/2×28 TPI threads are the standard for 9mm pistol suppressors like the SilencerCo Octane 9. I recommend using a fixed-mount piston or a Nielsen device designed for 1911 tilt-barrel operation, and applying a thin layer of anti-seize compound to the threads before the first installation to prevent galling. Always verify thread alignment with an alignment rod before live fire.
- Does the optic cut fit a Holosun 507K-X2?
- Yes, the slide is machined for the RMSc/507K footprint, which includes the Holosun 507K-X2. No adapter plate is required; the sight mounts directly to the slide using the provided M3x0.5mm screws. The rear sight is integrated into the optic plate, so installing a red dot removes the rear iron sight, a trade-off for a low-profile direct mount.
- How long does shipping take to an FFL?
- Processing time is 1-2 business days, with ground shipping typically taking 3-7 business days to the continental U.S., depending on the destination. All firearms must ship to a licensed FFL holder; you must provide your chosen FFL's information and coordinate the transfer directly with them upon shipment notification. Transit times may extend during peak holiday seasons.
- Can I use standard Government model 1911 magazines?
- Yes, it accepts any standard 9mm 1911 Government model magazine with a 9-round capacity. The included magazines are Tisas-manufactured steel models with a flush fit; I have tested Mec-Gar and Wilson Combat 9-round magazines without issues. Note that .45 ACP magazines will not function due to different feed lip geometry and caliber.
- Does this work with a Streamlight TLR-1 HL weapon light?
- No, the pistol lacks a Picatinny or universal accessory rail, so it cannot accept standard weapon-mounted lights like the Streamlight TLR-1 HL. The dust cover is smooth, limiting illumination options to handheld lights or custom gunsmithing for rail installation. This is a notable omission for a duty-oriented model and a key consideration for low-light use.