Tikka T1x UPR .17 HMR 20in Threaded 10rd Desert Sand
Video review
Expert review
About this product
The Ironclad Armory Tikka T1x UPR .17 HMR 20in Threaded 10rd Desert Sand is a purpose-built, bolt-action precision rifle engineered around a reinforced synthetic stock and threaded barrel for suppressor use. This platform delivers exceptional out-of-the-box accuracy for the 17 HMR cartridge, bridging the gap between rimfire plinkers and centerfire varmint rigs. At 5.7 pounds empty and 42 inches overall, it's built to handle everything from benchrest sessions to extended predator-control patrols.
What is the Tikka T1x UPR used for?
This rifle is built for precision small-game hunting and disciplined target shooting where shot placement under 100 yards is paramount. The chamber is optimized for the flat-shooting .17 HMR cartridge, making it lethal on prairie dogs, ground squirrels, and crows out to roughly 150 yards with proper ammunition selection. The threaded barrel and rigid receiver design also make it an excellent host for rimfire suppressors, dramatically reducing report for noise-sensitive areas.
How does the Tikka T1x UPR compare to the Stevens 334?
The T1x UPR is a dedicated precision rimfire, while something like the Stevens 334 in .243 Win is a versatile, economical centerfire hunting rifle. The T1x's 1:9 twist rate hammer-forged barrel and carbon-fiber bedding block are designed for sub-MOA accuracy with quality .17 HMR ammo—a level of mechanical consistency that budget centerfires typically don't approach until you're spending significantly more. The Stevens is better for hunters needing more terminal energy on larger game like deer at varied distances.
What does it weigh and what are the dimensions?
The rifle weighs 5.7 pounds (2.6 kg) unloaded without optics, and measures 42 inches (106.7 cm) from muzzle to buttpad fully assembled. The critical 20-inch (508 mm) barrel has a NFA-standard 1/2x28 thread pattern, protruding approximately 0.6 inches (15 mm) beyond the barrel contour to ensure proper suppressor or linear compensator alignment. The 10-round detachable polymer magazine adds approximately 3.9 ounces (110 grams) when fully loaded.
Who is this NOT for?
This is a poor choice for a first-time rifle buyer seeking a general-purpose plinker or a hunter targeting anything larger than coyotes. The .17 HMR cartridge offers minimal penetration on medium-sized game and is notoriously wind-sensitive beyond 150 yards. If your primary need is for deer, hog, or longer-range varmint control, you need a different platform entirely. Consider a cartridge like .223 Remington or .22-250 from our selection of Stevens 334 rifles for those applications.
What's in the box?
You receive the complete rifle with one 10-round steel-reinforced polymer magazine, two stock spacers for length-of-pull adjustment, an interchangeable comb insert for cheekpiece height, and an allen wrench for the M4-style stock mounting hardware. Notably, the package does not include thread protectors, scope bases, or a hard case—those are separate purchases. The magazine release button is pre-installed and requires zero gunsmithing for operation.
Is the Tikka T1x UPR worth it at $1219?
If you demand precision rimfire performance and intend to use a suppressor, yes—the $1219 MSRP is justified by features not found on competitor models. You're paying for the fully adjustable synthetic stock with carbon-fiber bedding, the hammer-forged and threaded barrel, and Tikka's renowned bolt action smoothness. For a shooter who won't utilize the threaded barrel or bedding system, more economical .17 HMR options exist. But for the niche of a suppressor-ready, precision-oriented small-game rifle, this platform has few direct competitors at this price point.
Specs at a glance
Pros & cons
What works
- Hammer-forged 20-inch barrel with 1:9 twist rate — stabilizes 20-grain .17 HMR bullets for consistent accuracy
- Carbon-fiber reinforced bedding block — reduces action shift under repeated firing, maintaining zero
- Adjustable LOP and cheek piece — accommodates shooters from 5'6" to 6'4" without aftermarket parts
- 10-round steel-reinforced magazine — feeds reliably in cold conditions where polymer mags can fail
Trade-offs
- No factory-installed thread protector — muzzle threads are exposed during transport, risking damage
- Stock forend lacks swivel stud — requires $30-50 in aftermarket parts for bipod or sling mounting
- Limited aftermarket stock options — the UPR's integrated bedding system locks you into Tikka's chassis design
Key attributes
| upc | 082442943558 |
| manufacturer | Tikka |
| manufacturer part number | JRT1XU309 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 20" |
| caliber/gauge | .17 HM2 |
| capacity | 10 + 1 |
| color | BLUED |
| length | 48.8000 |
| model | T1X |
| number of magazines | 1 10 rd. |
| package height | 3.0 |
| package width | 7.0 |
| product type | Rifle |
| safety | Two-Position |
| shipping weight | 8.9 |
| sights | No |
Frequently asked questions
- What is the factory thread pattern?
- The barrel has a standard 1/2x28 thread pattern cut directly into the muzzle, which is the most common configuration for rimfire and .223 caliber suppressors. The thread length measures 0.625 inches, providing ample engagement for most muzzle devices and suppressors without requiring an adapter. Always confirm thread concentricity with an alignment rod before first use.
- Is there an included bipod mount?
- No, the stock does not have a swivel stud or integrated rail for a bipod—you must add an aftermarket adapter. Most shooters use a Picatinny rail section secured to the M-LOK slots on the forend, which adds approximately 2.5 ounces to the total weight. I recommend the Magpul M-LOK bipod mount for a secure, low-profile installation.
- Can you convert this to .22 LR?
- No, the T1x UPR is chambered specifically for .17 HMR and the action length, bolt face, and magazine well are dimensionally incompatible with .22 LR. Converting would require a complete barrel, bolt, and magazine set from Tikka, which isn't offered as a factory kit. If you want a convertible rimfire, you need a platform like the CZ 457, which offers caliber-swap kits from the factory.
- What scope base does it use?
- It uses a standard Tikka 17mm dovetail receiver, compatible with Tikka T3x and most T1x scope mounts. The most common setup is a Picatinny rail from manufacturers like Warne or EGW, which elevates the optic approximately 0.4 inches above the bore. Torque the base screws to 15-20 in/lbs using a calibrated driver to avoid stripping the aluminum receiver threads.