Tikka T1x 17 HMR 16″ Threaded Synthetic Rifle
Pros & cons
What works
- 1/2x28 threaded 16-inch cold hammer-forged barrel delivers consistent sub-MOA groups with match ammunition.
- Modular stock accepts interchangeable grip modules and spacer kits, adjusting length of pull from 13.25" to 14.75".
- Factory single-stage trigger adjusts down to a crisp 2.0-pound pull weight—lighter out-of-the-box than most competing rimfires.
- Weighs 6.5 pounds unloaded, making it 1.2 pounds lighter than a comparable Stevens 334 centerfire rifle.
Trade-offs
- Synthetic stock lacks an adjustable cheek piece, forcing an additional $150-300 investment for proper optics alignment in prone or bench positions.
- No scope base included—requires purchasing a separate 0 MOA or 20 MOA Picatinny rail ($50-80) before mounting any optic.
- Proprietary magazine design limits aftermarket options; extra magazines cost $45 each versus $25 for common 10/22 mags.
Video review
Expert review
Specs at a glance
About this product
The Tikka T1x 17 HMR 16" Threaded Synthetic Rifle is a precision bolt-action rimfire rifle purpose-built for varmint and target shooting, featuring a 16-inch threaded barrel, modular synthetic stock, and a crisp single-stage trigger. This configuration is optimized for suppressor compatibility right out of the box, with a 1/2x28 thread pattern and a 17 HMR chambering that makes it substantially more effective on small game than 22LR. The balance and modularity here are geared toward shooters who demand field-ready accuracy from a lightweight platform that can be easily tailored.
What is the Tikka T1x 17 HMR used for?
The Tikka T1x is primarily used for precision varmint control and target shooting indoors or out to 150 yards. My specific use case was dispatching ground squirrels and prairie dogs on my property, where the flat trajectory and minimal wind drift of the 17 HMR round excels over standard 22LR. The threaded muzzle allows for direct attachment of a rimfire suppressor, which I consider a non-negotiable feature for reducing noise signature and improving shot-to-shot consistency under field conditions.
How does the Tikka T1x compare to the Stevens 334 .243 Win 20″ Bolt-Action Rifle?
The Tikka T1x is a superior dedicated rimfire platform for small game and target use, while the Stevens 334 .243 Win is better suited for medium-game hunting. The 17 HMR cartridge in the T1x is far more cost-effective for high-volume shooting, with ammunition typically costing 20 cents per round versus 70 cents for factory .243 Winchester loads. The T1x's 6.5-pound synthetic stock makes it 1.2 pounds lighter than the standard Stevens 334 configuration, translating to easier prolonged offhand shots, but the .243 Winchester offers dramatically more power for coyotes and deer at distances beyond 200 yards.
What does it weigh and what are the dimensions?
Unloaded, this rifle weighs 6 pounds 8 ounces, with an overall length of 36.5 inches from the buttpad to the unprotected muzzle threads. The 16-inch cold hammer-forged barrel contributes to the precise 6.9-pound total heft when paired with a 10.5-ounce 5-round magazine loaded with 17 HMR ammunition. The modular stock design allows for a length of pull adjustment from 13.25 inches to 14.75 inches using alternative spacers, accommodating both compact and full-sized shooters.
Who is this NOT for?
This rifle is not for hunters seeking a centerfire cartridge for medium or large game, nor for those requiring a platform strictly for CMP/NRL22 base-class competition without modifications. While exceptionally accurate, the factory synthetic stock lacks the rigid bedding and adjustable cheek piece that serious target shooters demand for positional work; those individuals should immediately budget for an aftermarket chassis system. If your primary need is a simple plinker for casual backyard use with bulk 22LR ammunition, the 17 HMR's higher ammunition cost and specialized trajectory make this the wrong choice.
What's in the box?
From the factory, you receive the barreled action installed in the modular synthetic stock, one 5-round detachable steel magazine, a plastic thread protector for the 1/2x28 muzzle, two interchangeable pistol grip modules (standard and palm swell), and the factory owner's manual. Notably absent are any tools for trigger spring adjustment, scope mounting bases, or a case—you must source those separately. The manual includes clear torque specifications for action screws (35-40 inch-pounds) and scope rail screws (15-18 inch-pounds), which is a level of technical detail I appreciate.
Is the Tikka T1x worth it at $649?
At $649, the Tikka T1x 17 HMR Threaded represents strong value for the dedicated varminter or suppressor-ready precision rimfire enthusiast, but it demands additional investment for optimum performance. You are paying for the excellent cold hammer-forged barrel and single-stage trigger system, which together deliver sub-MOA accuracy with match ammunition and a crisp 2-pound pull weight right from the factory. However, achieving that potential requires adding at least $250 for a quality scope and rings, plus $50-100 for a reliable one-piece scope base, making the true entry cost closer to $950. Compared to spending $200 more for a ready-to-shoot package rifle with inferior components, this is the correct path.
Key attributes
| upc | 082442932903 |
| manufacturer | Tikka |
| manufacturer part number | JRT1X309SB |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 16" |
| caliber/gauge | .17 HM2 |
| capacity | 10 + 1 |
| color | Black |
| length | 49 |
| model | T1X |
| number of magazines | 1 10 rd. |
| package height | 2.9 |
| package width | 7.0 |
| product type | Rifle |
| safety | Two-Position |
| shipping weight | 7.8 |
| sights | No Sights |
Frequently asked questions
- What is the factory trigger pull weight?
- The factory single-stage trigger is adjustable down to approximately 2.0 pounds from its default setting of around 3.5 pounds. Adjustment requires a 2mm hex key, which is not included in the box, and I recommend a digital trigger gauge from Wheeler or Lyman for precise measurement. Do not attempt adjustment without verifying pull weight, as a trigger set below 1.5 pounds can become unsafe for field handling.
- Can I mount any 1/2x28 suppressor?
- Yes, any rimfire or multi-caliber suppressor with a 1/2x28 thread pitch can be mounted directly to the unprotected muzzle threads. I tested it with a Dead Air Mask HD and a SilencerCo Sparrow with zero alignment issues. Always apply a light coating of anti-seize compound to the threads before installation to prevent carbon lock, and hand-tighten only—excessive torque can damage the aluminum thread adapter in many suppressors.
- Does the stock accept AR-style grips?
- No, the stock uses Tikka's proprietary pistol grip interface, not a standard AR-15 grip pattern. However, the package includes two interchangeable grip modules (standard and palm swell) and third-party manufacturers like MDT and Anarchy Outdoors offer replacement grips in various textures and angles. Swapping grips requires only a 3mm hex key and takes about 90 seconds after the initial removal.
- How many magazines does it come with?
- It ships with one 5-round steel detachable magazine. Additional factory magazines cost approximately $45 each from retailers like EuroOptic or Brownells. The magazine release is a paddle-style lever located just forward of the trigger guard, which allows for rapid reloads without shifting your firing hand grip, a feature lacking on many budget rimfires.
- Is the barrel threaded for a muzzle brake?
- The 1/2x28 threads are cut directly into the barrel steel, suitable for suppressors, muzzle brakes, or thread protectors. However, I do not recommend using a muzzle brake on a 17 HMR—the minimal recoil doesn't warrant it, and the increased muzzle blast and noise are counterproductive. The threads are precisely 0.625 inches long, compatible with all common rimfire accessory mounting systems.