TAURUS TX22 Gen 2 .22 LR 4.1in 10rd Black
Pros & cons
What works
- Striker-fired operation provides a consistent 5.5-lb trigger pull shot-to-shot, simpler than many .22 LR hammer-fired designs.
- Weighs only 17.3 oz unloaded — 6 oz lighter than an all-metal Browning Buck Mark Camper model.
- Includes two 10-round magazines, doubling the ready capacity of many single-magazine .22 LR pistols at this price point.
- 4.1-inch barrel and 7.06-inch overall length create a balanced, pointable package ideal for standard pistol training drills.
Trade-offs
- No factory-threaded barrel on base model — suppressor-ready version is a separate SKU adding $40-60.
- Polymer magazine feed lips can deform under heavy use or improper loading, requiring periodic inspection for reliable feeding.
- Adjustable rear sight requires a 3/32 inch hex key for windage, a tool not included in the box.
Video review
Expert review
Specs at a glance
About this product
What is the TAURUS TX22 Gen 2 .22 LR 4.1in 10rd Black pistol? It is a striker-fired, compact rimfire pistol engineered for reliable, low-recoil training and recreational use, positioned as one of the most mechanically straightforward polymer-frame .22 LR handguns in its price segment. Chambered in .22 Long Rifle, this 4.1-inch barreled handgun uses two included 10-round magazines to deliver a platform that emphasizes consistent ignition and simple manipulation over raw power or modularity. Its total package weight of approximately 23.7 ounces with unloaded magazines is a critical figure for shooters considering it as a secondary or bag-carry option.
What is the TAURUS TX22 Gen 2 used for?
Its primary application is affordable, high-round-count rimfire training and recreational plinking. I classify it as a dedicated suppressor host and a skills-maintenance tool for centerfire pistol shooters, not as a primary defensive firearm. The low-impulse .22 LR cartridge allows for extended practice sessions focusing on trigger control and sight alignment without the cumulative fatigue or cost of 9mm ammunition, while the suppressor-ready threaded barrel model (a separate SKU) makes it a logical baseline for testing NFA-regulated sound reduction equipment without heavy backpressure concerns.
How does the TAURUS TX22 Gen 2 compare to the Ruger SR22?
The TX22 Gen 2 emphasizes higher-capacity, budget-conscious magazine design over the Ruger SR22's traditional, smaller-scale metal-frame feel. Mechanically, the Taurus feeds from a 10-round double-stack polymer magazine versus the Ruger's 10-round single-stack, making the TX22 grip marginally wider. The Ruger SR22 retains an edge in out-of-the-box finish quality and precise slide-to-frame fit, but the Taurus platform offers a simpler field-strip procedure and lower per-magazine cost by approximately 40%, which matters significantly during volume training. For a shooter prioritizing a classic, scaled-down 1911-style manual of arms, the Stevens 334 bolt-action platform offers a different kind of fundamental discipline.
What does it weigh and what are the dimensions?
The pistol has an unloaded weight of 17.3 ounces (490 grams) and an overall length of 7.06 inches (179.3 mm). These figures make it approximately 25% lighter than a comparably sized, all-metal .22 LR pistol like the Browning Buck Mark, directly influencing its minimal perceived recoil and ease of manipulation for shooters with reduced hand strength. The 4.1-inch barrel (104.1 mm) provides a standard sight radius conducive to most informal target work at distances under 25 yards, but its fixed nature means alternative barrel lengths require a complete upper assembly replacement, unlike modular systems like the P320 FCU.
Who is this NOT for?
This is not an appropriate choice for anyone seeking a primary defensive or duty sidearm; the .22 LR rimfire cartridge lacks the terminal performance and absolute reliability under all conditions required for that role. Similarly, competitive shooters requiring sub-2.5-pound trigger breaks, optic-ready slides, or extensive aftermarket support for frame weighting will find the TX22 Gen 2's ecosystem limited compared to a Glock 44 or a dedicated 1911 .22 conversion kit. Its polymer frame construction also means it will not accept the same armorers' tools and fitting procedures as a steel-frame Stevens 555 Sporting shotgun.
What's in the box?
You receive the complete pistol, two 10-round polymer magazines, a basic cable lock, and the required owner's manual and compliance paperwork. Notably absent is any form of hard case, a bore brush, or supplementary sight adjustment tools, which is standard for firearms in this price point but requires the end user to source a 3/32 inch hex key for windage adjustments. Total package weight, including all paperwork and unloaded magazines, is approximately 23.7 ounces.
Is the TAURUS TX22 Gen 2 worth it at $300.99?
Yes, at $300.99 it represents a solid value proposition for its intended role as a high-functioning, budget-conscious rimfire trainer. The direct financial comparison is against the Ruger SR22, which typically commands a $70-$100 premium, and that price difference directly funds nearly 1,000 rounds of .22 LR ammunition for practice. If your sole requirement is a reliable, simple .22 LR pistol for informal range use and you accept the platform's limitations in aftermarket support and terminal ballistics, this price point is justifiable. For shooters demanding a more refined fit and finish or a metal-frame heritage design, the additional investment in a Browning or Ruger alternative is warranted.
Key attributes
| upc | 725327942016 |
| manufacturer | Taurus |
| manufacturer part number | 1-2TX22341-10 |
| action | Semi-Auto |
| atf type | Pistol |
| barrel length | 4.1" |
| caliber/gauge | .22 LR |
| capacity | 10 |
| color | Black |
| length | 10 |
| model | TX22 |
| number of magazines | 2 |
| package height | 6.0 |
| package width | 1.75 |
| product type | Striker Fired |
| safety | Manual Safety |
| shipping weight | 1.9 |
| sights | Adjustable Sights |
| sights type | ADJUSTABLE |
| slide description | Serrated |
| state restriction (ca) | NO DIRECT SHIP TO CALIFORNIA |
Frequently asked questions
- Is it compatible with a suppressor?
- The standard model shown (TAURUS TX22 Gen 2 .22 LR 4.1in) does NOT have a threaded barrel from the factory. Taurus offers a separate 'Competition' or 'Threaded Barrel' SKU specifically designed for suppressor attachment, which requires a 1/2x28 thread pitch adapter. Always confirm your local and federal NFA regulations, including Form 4 wait times averaging 8-10 months, before purchasing a suppressor host.
- Does it fit a Glock 19 holster?
- No, the TAURUS TX22 Gen 2 will not safely or securely fit a holster molded for a Glock 19. The frame dimensions, trigger guard geometry, and slide profile are entirely different, creating a dangerous retention mismatch. You must use a holster specifically designed for the TX22 Gen 2, such as those from Vedder Holsters or Taurus's own branded options, to ensure proper trigger guard coverage and secure carry.
- How long does shipping take?
- Processing and shipping for firearms to your selected FFL dealer typically takes 3-5 business days from order verification. The total timeline from purchase to pickup is dictated by the mandatory background check (NICS), which can be instantaneous or extend to several days based on system volume. Contact your chosen FFL directly for their specific transfer procedures and fees, which average $25-$50.
- Does this work with a red dot sight?
- No, the TAURUS TX22 Gen 2 standard model does not have an optic-ready slide cut. Mounting a red dot sight would require sending the slide to a qualified machine shop like CHPWS or Jagerwerks for a specific footprint cut, which costs $120-$180 and adds 4-6 weeks of turnaround time. Consider pistols like the Glock 44 MOS if an optics-ready .22 LR is a primary requirement.