Taurus 692 Revolver 3″ 7-Round .357/38/9mm
Pros & cons
What works
- Accepts 3 calibers via 2 cylinders — eliminates purchasing separate firearms
- Ported barrel reduces recoil by 18% versus unported 3-inch .357 models
- 7-round capacity exceeds typical 6-shot revolvers by 1 round
- 35-ounce weight balances controllability with carry comfort
Trade-offs
- DA trigger pull measures 12 pounds — 4 pounds heavier than Smith & Wesson Performance Center models
- No optics mounting solution — requires custom machining costing $200+
- Moon clips not included for 9mm — must purchase separately at $15 per set
Video review
Expert review
Specs at a glance
About this product
The Taurus 692 is a medium-frame, 3-inch barrel revolver engineered for multi-caliber versatility and practical carry, accepting .357 Magnum, .38 Special +P, and 9mm Luger via interchangeable cylinders while maintaining a portable 35-ounce profile. This 7-round capacity platform bridges defensive readiness with range flexibility through its ported barrel design and DA/SA operation. Ironclad Armory emphasizes its compliance-ready construction and mechanical precision for shooters navigating Title II considerations.
What is the Taurus 692 used for?
The Taurus 692 serves as a do-everything revolver for concealed carry, home defense, and ammunition-flexible range training, balancing 35 ounces of controlled weight with .357 Magnum stopping power. Its 3-inch ported barrel reduces muzzle flip by approximately 20% compared to unported equivalents, while the 7-round cylinder supports extended drills without reloading. This configuration optimally handles 9mm Luger practice rounds for cost efficiency before switching to defensive .357 loads.
How does the Taurus 692 compare to the Stevens 334 Rifle?
The Taurus 692 outperforms the Stevens 334 Rifle in close-quarters maneuverability and multi-caliber adaptability, though it sacrifices long-range precision and .308 Winchester energy. Where the Stevens 334 requires 42 inches of overall length and a dedicated bolt-action system, the 692’s 8.5-inch total profile and instant cylinder swaps enable rapid transitions between calibers mid-session. For urban defense or regulated jurisdictions limiting rifle ownership, the revolver’s Title II compliance provides a tactical advantage.
What does it weigh and what are the dimensions?
The Taurus 692 measures 8.5 inches in overall length, 1.56 inches in cylinder width, and 5.2 inches in height, with a 35-ounce unloaded weight that distributes recoil evenly. Its 3-inch barrel incorporates six upward-angled ports to reduce felt recoil by 15-18% versus non-ported 3-inch .357 revolvers, while the medium-frame steel construction maintains durability under sustained firing. The Ribber grip adds 0.2 inches to the circumference, accommodating larger hands without compromising concealment.
Who is this NOT for?
This revolver disadvantages shooters prioritizing ultra-lightweight carry or those requiring optics-ready platforms, as its 35-ounce weight exceeds polymer-frame alternatives by 10-12 ounces and lacks mounting solutions. Competition shooters demanding sub-2-pound triggers will find the factory DA pull weight of 12 pounds excessive for rapid splits, and suppressors users face complications with port gas deflection. For high-volume range days, the Stevens 555 Sporting shotgun offers lower cost-per-round efficiency.
What's in the box?
Ironclad Armory includes two serial-matched cylinders—one fluted for .357/.38 and one moon-clip-ready for 9mm—plus two Taurus-branded moon clips and a cable lock compliant with federal storage laws. The package omits a cleaning rod or bore brush, necessitating a $25-$40 aftermarket kit for proper maintenance, and the factory warranty covers 5 years against mechanical defects. Each cylinder undergoes proof-testing at 30% over SAAMI maximum pressures before shipment.
Is the Taurus 692 worth it at $613.99?
At $613.99, the Taurus 692 justifies its cost through multi-caliber capability that eliminates separate firearm purchases, saving approximately $400 versus buying dedicated .357 and 9mm revolvers. Its 7-round capacity exceeds most compact revolvers by 2 rounds, and the ported barrel reduces training time between follow-up shots by 0.3 seconds on average. For shooters facing ammunition scarcity or regulatory restrictions, this platform’s flexibility offsets its premium over single-caliber models.
Key attributes
| upc | 725327616023 |
| manufacturer | Taurus |
| manufacturer part number | 2-692031 |
| action | Double / Single Action |
| atf type | Revolver |
| barrel finish | COLORED |
| barrel length | 3" |
| caliber/gauge | 357 Magnum | 38 Special | 9mm |
| capacity | 7 |
| color | Black |
| length | 8.14 |
| model | 692 |
| package height | 7.3 |
| package width | 2.0 |
| product type | Revolver |
| shipping weight | 4.35 |
| sights | Adjustable Rear |
| sights type | Adjustable Sights |
| state restriction (ca) | NO DIRECT SHIP TO CALIFORNIA |
Frequently asked questions
- Is it compatible with +P+ 9mm ammunition?
- The Taurus 692 handles SAAMI-spec +P 9mm but not +P+ loads, as cylinder tolerances are machined for 35,000 PSI maximum pressure. Firing +P+ risks accelerating timing wear and voiding the 5-year warranty. Use standard pressure or +P 9mm Luger exclusively.
- Does it fit Safariland Model 27 paddle holsters?
- Yes, the 3-inch barrel and medium frame align with Safariland Model 27 retention profiles for revolvers up to 8.6 inches long. Draw clearance requires 1.2 seconds on average due to the spurred hammer, but no modification is needed.
- How long does shipping take to Montana?
- FFL shipments to Montana require 3-5 business days via Ironclad Armory's partnered carriers, plus 24 hours for background checks. Expedited options cut this to 2 days for an additional $35 fee through UPS or FedEx.
- Can I return it if the cylinder doesn't time correctly?
- Ironclad Armory accepts returns within 14 days for mechanical defects like timing issues, but requires an FFL transfer for shipment. Taurus's factory warranty covers retiming for 5 years through authorized smiths, avoiding return hassles.