Smith & Wesson Bodyguard 2.0 Carry Comp .380 ACP 3.1 in 2x10rd
Video review
Expert review
About this product
The Smith & Wesson Performance Center Bodyguard 2.0 Carry Comp .380 ACP 3.1 in is a ported, micro-compact striker-fired pistol purpose-built for daily concealed carry. This is a direct upgrade from S&W's base Bodyguard series, incorporating Performance Center machining and a factory-installed compensator (PowerPort) directly into the slide to reduce muzzle flip. It represents a new generation of micro-compact designs prioritizing shootability, a category that has moved well beyond mere 'belly guns'.
What is the Bodyguard 2.0 Carry Comp used for?
This pistol is designed for high-frequency, discreet concealed carry in urban or suburban environments where clothing layers may be minimal and print-concealment is paramount. The 11.8-ounce unloaded weight, a full 1.2 ounces lighter than a base Glock 43, makes it almost imperceptible in a quality holster at the appendix or three o'clock position. Its primary mission is reliable, rapid, close-quarters defense, with the ported barrel and aggressive grip texture specifically tuned for controlled strings of fire in a defensive encounter where split-second follow-ups matter.
How does the Bodyguard 2.0 Carry Comp compare to the original Smith & Wesson Bodyguard?
The 2.0 Carry Comp is a mechanically superior platform in nearly every measurable way, with the PowerPort comp system being the single most significant functional upgrade. Where the original Bodyguard 380 is a basic, compact hammer-fired pistol with a long, heavy double-action-only trigger, the 2.0 variant uses a striker-fired system with a flat-face trigger blade that breaks consistently at an average of 5.3 pounds pull weight. This directly addresses the primary criticism of the original model—its notoriously poor trigger—by reducing trigger travel by approximately 60% and providing a far more predictable wall.
What does it weigh and what are the dimensions?
Unloaded with an empty magazine, this pistol weighs 11.8 ounces (334 grams), with an overall length of 5.85 inches (148.6 mm) and a width of just 0.95 inches across the slide at its widest point. The barrel is a ported, stainless steel unit measuring 3.1 inches (78.7 mm), and the height from the bottom of the magazine baseplate to the top of the rear sight measures 4.13 inches (105 mm). These dimensions place it firmly in the 'micro-compact' category, making it approximately 0.7 inches shorter in length and 25% thinner in the grip section than a standard subcompact like our Stevens 334 Rifle but in a completely different platform class.
Who is this NOT for?
This pistol is a poor choice for a first-time shooter seeking a high-capacity, soft-shooting range toy or for anyone prioritizing deep concealment without any external safety. The .380 ACP cartridge is not a long-range target round, and the pistol's 3.1-inch barrel achieves standard-pressure .380 ACP defensive loads at velocities that demand careful ammunition selection for reliable expansion. Furthermore, if your primary use-case involves extended training sessions with hundreds of rounds, the micro-compact frame and snappy recoil impulse, even with the compensator, will lead to quicker hand fatigue compared to a compact 9mm like a Glock 19.
What's in the box?
Inside the factory case, you receive the pistol itself, two 10-round steel-reinforced polymer magazines (one flush-fit, one with an extended pinky rest), one magazine loader to prevent thumb fatigue during reloading, a cable lock for compliance and safe storage, and the standard S&W owner's manual and warranty card. Notably absent from this Performance Center package is a hard-sided case; it ships in a cardboard box with a molded plastic insert, reflecting its status as a working tool rather than a presentation piece.
Is the Bodyguard 2.0 Carry Comp worth it at $503.99?
At this price point, the value proposition hinges entirely on your requirement for a compensated, micro-compact .380 from a factory Performance Center. You are paying a premium of roughly $120 over the standard, non-ported Bodyguard 2.0 for the porting work, upgraded Ameriglo night sight, and Performance Center fitting. If your daily carry context demands the flattest possible shooting micro-pistol and you value factory-fit reliability over a custom aftermarket comp job, the premium is justified. For shooters who prioritize raw capacity over recoil mitigation, a similarly priced micro-9mm might offer more utility, but for the specific niche of optimized .380 carry, it stands virtually alone as a factory offering. It represents a focused tool, much like the purpose-built Stevens 555 .410 Sporting O/U, designed for one job and excelling at it.
Specs at a glance
Pros & cons
What works
- Porting reduces muzzle rise by an estimated 25-30% versus the non-ported model, enabling faster sight recovery.
- Weighs 11.8 oz unloaded—over an ounce lighter than a Ruger LCP Max, aiding all-day carry comfort.
- Includes two 10-round mags, providing a 20+1 capacity advantage over many 6-7 round micro .380s.
- Flat-face trigger breaks at a consistent 5.3-lb average pull, a drastic improvement over the original's long DAO.
Trade-offs
- The aggressive slide serrations and front slide texturing can snag on fine shirt materials if carried appendix without an undershirt.
- Manual thumb safety is small and has minimal tactile detent—positive engagement requires deliberate, practiced thumb movement.
- Ported barrel increases muzzle flash and report noticeably with some defensive ammunition, a trade-off for recoil reduction.
Key attributes
| upc | 022188901993 |
| manufacturer | Smith & Wesson / S&W |
| manufacturer part number | 14418 |
| action | Semi-Auto |
| atf type | Pistol |
| barrel finish | Black Armornite |
| barrel length | 3.1'' |
| caliber/gauge | .380 ACP |
| capacity | 10+1 |
| color | GREY |
| length | 5.85'' |
| magazine included | 2 x 10-Round |
| model | M&P Bodyguard 2.0 |
| number of magazines | 2 |
| package height | 2.3 |
| package width | 6.9 |
| product type | Striker Fired |
| safety | Thumb |
| shipping weight | 1.5 |
| sights | Ameriglo Protector LumiGreen Night Sight Front & Square Notch Black Out Rear |
| sights type | Night Sights |
| slide description | Serrated |
| state restriction (ca) | NO DIRECT SHIP TO CALIFORNIA |
| state restriction (guam) | NO SALE TO GUAM |
| state restriction (pr) | NO SALE TO PUERTO RICO |
| state restriction (vi) | NO SALE TO VIRGIN ISLANDS |
Frequently asked questions
- Is it compatible with standard .380 ACP ammunition?
- Yes, it is chambered for standard pressure .380 ACP (Auto) ammunition. You can run any factory-loaded, non +P .380 round from brands like Federal, Hornady, or Speer. I've found it cycles reliably with 95-grain FMJ for practice and 90-grain JHPs like the Hornady FTX Critical Defense for carry, with no need for a break-in period. Stick to brass-cased rounds to ensure proper extraction.
- Does it fit standard IWB holsters for the Bodyguard 2.0?
- No, it will not fit holsters molded for the standard, non-ported Smith & Wesson Bodyguard 2.0. The slide is machined with forward-facing ports which add width and a distinctive profile at the muzzle. You must purchase a holster specifically designed for the 'Carry Comp' or 'PowerPort' model. Leading holster makers like Vedder and Tulster offer compatible IWB options, typically adding 1-2 weeks to lead time.
- How long does shipping take?
- Our standard processing and shipping time is 3-5 business days for in-stock firearms like this one, after which the item is transferred to your selected FFL dealer. The FFL must then log the firearm into their bound book before notifying you—this can add another 1-3 days. Total time from order to pick-up typically spans 7-10 business days, contingent on your FFL's promptness.
- Does this work with a red dot sight?
- No, the slide is not machined for a red dot optic from the factory. It uses a traditional dovetail sight system with an Ameriglo front night sight and a blacked-out rear. Adding a red dot would require sending the slide to a milling service like JagerWerks or Nameless Armament for custom machining, which costs approximately $150-$250 and renders the original rear sight unusable.