Sig Sauer P320 XTEN Carry Comp 10mm 3.8″ MS Black
About this product
What is the Sig Sauer P320 XTEN Carry Comp 10mm? It's a short-frame, optics-ready pistol built around a compensated 3.8-inch bull barrel and chambered in 10mm Auto, designed to deliver full-power cartridge performance in a concealable carry package. This variant includes a manual safety fire control unit, a feature that appeals to a specific segment of the market concerned with administrative handling and holstering protocols. Its core engineering trade-off is reducing muzzle rise through porting at the expense of some decibel increase and potential reliability shifts with lighter defensive loads.
What is the Sig Sauer P320 XTEN Carry Comp used for?
This pistol is for backcountry carry where terminal performance on medium game or defense against large predators is the priority, compressed into a daily-carry size. The 10mm cartridge's 600-700 ft-lb energy potential from a pistol-sized platform demands effective recoil management, which the slide-integrated compensator addresses directly. It's not a flat-range plinker; it's a serious tool for managing the physics of a high-pressure round in a package that hides under a jacket.
How does the Sig Sauer P320 XTEN Carry Comp compare to the Stevens 334 Rifle in .308 Win?
The P320 XTEN is superior for rapid deployment and concealment, while the bolt-action Stevens 334 Rifle in .308 Win dominates in raw energy and effective range. The comparison highlights application: the 10mm pistol delivers about 700 ft-lbs at the muzzle, while the .308 rifle easily exceeds 2,500 ft-lbs, with a practical engagement distance extending past 300 yards versus the pistol's 50-yard effective limit. You choose the XTEN for a fight you need to start quickly at close quarters; you choose the Stevens 334 for a shot you have time to make at distance.
What does it weigh and what are the dimensions?
Loaded with a 10-round magazine, the P320 XTEN Carry Comp weighs 32.3 ounces (915 grams) and measures 7.6 inches in overall length. Its 3.8-inch bull barrel and 5.5-inch slide height create a dense, balanced feel that mitigates the sharp snap typical of compact 10mm pistols. For context, it’s approximately 0.8 inches shorter in overall length and 4 ounces heavier than a comparable Glock 29, trading some concealability for mass that soaks up recoil.
Who is this NOT for?
This is not for a new shooter or someone seeking a low-cost, high-volume training pistol. The 10mm cartridge costs roughly 40% more per round than 9mm, making proficiency shooting an expensive proposition. Furthermore, the manual safety variant requires consistent, ingrained training to disengage under stress, a skill many defensive pistol courses don't emphasize, potentially creating a dangerous fumble point if not mastered.
What's in the box?
You receive the pistol, two 10-round steel magazines, a cable lock, and the operator's manual. Notably, it does not include an optics plate; the slide is cut for the SIG PRO RX footprint, requiring a specific, separate purchase to mount common micro red dots like the Holosun 507K. Like most Sig Sauer pistols, expect to spend an additional $50-$80 to actually use the "optic-ready" feature unless your chosen optic has a native fit.
Is the Sig Sauer P320 XTEN Carry Comp worth it at $947.99?
At this price, it's worth it for the shooter who needs a compensated, optics-capable 10mm in a carry size and values the P320 modularity ecosystem. You're paying for the integrated comp machining, the XSeries trigger, and the night sights—features that would add $300+ to a base model. If you just want a 10mm pistol and plan to never mount an optic, a base Glock 20 or 40 at nearly $300 less is the more economical choice.
Specs at a glance
Video review
Pros & cons
What works
- Integrated compensator reduces measurable muzzle rise by approximately 15-20% compared to an uncompensated 3.8-inch 10mm barrel.
- Ships with XRAY3 Day/Night sights installed — a $120 value over standard contrast sights.
- XSeries flat trigger provides a consistent 5.5-6 lb pull with a crisp 90-degree break, superior to the standard P320's rolling hinge.
- Weighs 32.3 oz loaded, adding mass that directly counters 10mm recoil impulse in a compact frame.
Trade-offs
- Optic-ready slide requires a separate, proprietary mounting plate ($50-$80) for most popular red dots, unlike the Glock MOS system which includes plates.
- Manual safety model adds a potential failure point and training hurdle for shooters accustomed to striker-fired guns without external safeties.
- 10-round magazine capacity is standard due to state compliance, limiting utility compared to the 15-round magazines available for the full-size P320 XTEN.
Expert review
Key attributes
| upc | 798681712885 |
| manufacturer | SIG SAUER |
| manufacturer part number | 320XCA-10-COMP-MS-10 |
| action | Semi-Auto |
| atf type | Pistol |
| barrel finish | Black |
| barrel length | 3.8'' |
| caliber/gauge | 10mm |
| capacity | 10+1 |
| length | 7.6'' |
| magazine included | 2 x 10-Round |
| model | P320 |
| mount type | Sig PRO RX Footprint |
| number of magazines | 2 10 rd. Steel Mags |
| package height | 3.0 |
| package width | 10.0 |
| product type | Semi-Auto Pistol |
| safety | Manual |
| shipping weight | 3.7 |
| sights | XRAY 3 Day/Night Sights |
| sights type | Night Sights |
| slide description | Optic Ready/Serrated |
Frequently asked questions
- Is it compatible with standard P320 holsters?
- No, it is not fully compatible. The integrated compensator at the front of the slide and the XTEN frame's specific rail profile will prevent proper seating in holsters molded for standard P320 models like the Carry or Full-Size. You need a holster specifically designed for the P320 XTEN series, such as those from T-Rex Arms or Tier 1 Concealed, which account for the slide length and comp.
- Does the SIG PRO RX footprint fit Trijicon RMR optics?
- No, it does not fit directly. The SIG PRO RX footprint is proprietary. To mount a Trijicon RMR, Holosun 507C, or similar optic with an RMR footprint, you must purchase and install a separate adapter plate from Sig Sauer or a third-party manufacturer like CHPWS. The plate typically adds 0.125 inches to the height-over-bore.
- Can I convert the fire control unit to a non-manual safety version?
- Yes, but it requires a parts kit. The manual safety is a physical lever assembly installed in the fire control unit (FCU). Converting it to a non-safety FCU requires a detailed strip of the FCU, removal of the safety lever, sear, and related springs, and installation of a non-safety sear and filler plugs. Sig Sauer sells a $45 conversion kit, but the install is a 30-minute job requiring armorers' punches and patience.
- How long does shipping to an FFL take?
- Ironclad Armory processes and ships to your selected FFL within 1-3 business days. Transit time depends on carrier and destination, but continental US delivery typically adds 3-7 business days. The total timeline from order to your FFL receiving it is usually 5-10 business days, not including the FFL's own processing time for the 4473 background check.