Savage Axis XP 7mm-08 22 in. Left Hand w/ 3-9×40
Video review
Expert review
About this product
What is the Savage Axis XP 7mm-08 22 in. Left Hand w/ 3-9×40? It is a factory-sighted, left-handed bolt-action hunting rifle in 7mm-08 Remington designed for immediate field deployment without gunsmithing. The package includes a Weaver 3-9×40 scope mounted and boresighted on a two-piece base, a detachable 4-round magazine, and a black synthetic stock fitted for a left-handed shooter. This configuration targets hunters and general-purpose shooters who require a ready-to-use system with straightforward ergonomics.
What is the Savage Axis XP 7mm-08 used for?
This rifle is used for hunting medium game at typical field ranges of 50 to 300 yards. The 7mm-08 Remington cartridge, paired with the 22-inch button-rifled barrel, provides a flat trajectory and sufficient energy for deer, pronghorn, and similar-sized game. It's a dedicated left-hand hunting rifle, removing the ergonomic and safety compromises a southpaw faces with standard right-hand bolts—your hand never crosses the ejection port while cycling the action.
How does the Savage Axis XP compare to the Stevens 334?
The Axis XP is a superior out-of-the-box hunting solution, whereas the Stevens 334 is a better foundation for a custom project. This Axis includes a mounted and boresighted scope, immediate readiness the bare-bones Stevens lacks, saving you a minimum of $150 and an hour of gunsmith setup time. The trade-off is the Stevens 334's AccuFit stock system allows for adjustable comb height and length-of-pull, a fitting advantage the fixed synthetic Axis stock doesn't offer.
What does it weigh and what are the dimensions?
This rifle weighs 7.6 pounds unloaded and measures 42.5 inches in overall length. The 22-inch barrel contributes to a balance point approximately 5.5 inches forward of the receiver, aiding in steady offhand shooting. With an average scope and four rounds of 140-grain ammunition loaded, the total carry weight climbs to about 8.2 pounds, making it lighter than many wood-stocked alternatives like a comparable Ruger American.
Who is this NOT for?
This rifle is not for long-range precision shooters, tactical competitors, or those seeking a custom-fitted stock. The 1:9.5-inch twist rate stabilizes common hunting bullets up to about 168 grains, but it's not optimized for the heaviest, high-BC projectiles used in 1,000-yard disciplines. The fixed synthetic stock also lacks any adjustment for comb height or length-of-pull, unlike the system on the Stevens 555 Sporting O/U, making it a poor choice for shooters who require a precise, repeatable cheek weld.
What's in the box?
You receive the left-hand Savage Axis rifle with a 22-inch barrel, a factory-mounted and boresighted Weaver 3-9×40 scope on a two-piece base, and one detachable 4-round steel magazine. The package typically includes a basic set of Weaver scope rings, a manual, and a chamber flag, but does not include a gun lock, sling, or additional magazines—plan to source those separately. The boresight is a factory approximation; a final zero at the range with your chosen ammunition, consuming about 15 rounds, is mandatory for confirmed accuracy.
Is the Savage Axis XP worth it at $461.99?
At $461.99, this rifle package delivers significant value for a left-handed hunter seeking a ready-to-hunt system. The cost of a comparable bare rifle, a budget 3-9×40 scope, and professional mounting/boresighting would easily exceed $600. The genuine savings come from the included, functional optic and the left-hand configuration—a niche offering often commanding a $50-$75 premium. The value diminishes if you plan to immediately replace the Weaver scope or the stock, as you're paying for components you won't use.
Specs at a glance
Pros & cons
What works
- Left-hand bolt configuration eliminates right-hand ergonomic compromises for southpaw shooters.
- Includes factory-mounted Weaver 3-9×40 scope boresighted–saves $150+ and an hour of gunsmith setup time.
- Weighs 7.6 lbs unloaded–over a pound lighter than many comparable wood-stocked hunting rifles.
- 22-inch button-rifled barrel with 1:9.5" twist stabilizes common 7mm-08 hunting bullets up to 168 grains.
Trade-offs
- Fixed synthetic stock lacks length-of-pull or comb height adjustment–a $100-$250 aftermarket stock is needed for a custom fit.
- Weaver 3-9×40 scope is a basic model with mushy click adjustments (approx. 0.5-0.7 MIL deviation per click)–not suitable for precision work.
- Barrel is not threaded from the factory–suppressor mounting requires a $150-$200 gunsmith threading job.
- Detachable magazine release is not ambidextrous–a right-handed shooter operating this left-hand rifle must reach over or under.
Key attributes
| upc | 011356320162 |
| manufacturer | Savage |
| manufacturer part number | 32016 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 22" |
| caliber/gauge | 7mm-08 REMINGTON |
| capacity | 4 + 1 |
| color | Black |
| length | 48.6500 |
| number of magazines | 1 4 rd. Detachable Box |
| package height | 3.2 |
| package width | 8.2 |
| product type | Rifle |
| shipping weight | 9.85 |
| sights | No |
Frequently asked questions
- Is it compatible with standard scope rings?
- Yes, it uses standard Weaver-style bases and 1-inch rings. The included Weaver 3-9×40 scope has a 1-inch tube diameter. If you choose to upgrade the optic later, most rings from brands like Warne, Leupold, or Vortex will mount directly to the factory-installed two-piece bases.
- Does it fit in a standard rifle case?
- Yes, it will fit in a standard 44-inch or longer rifle case. With an overall length of 42.5 inches, a minimal 1.5 inches of padding is required on each end. I recommend a Plano All-Weather 42-inch case or larger for secure transport with the scope attached.
- How long does shipping take?
- For firearms, shipping to your selected FFL dealer typically takes 3-7 business days after processing, depending on your location and carrier. Processing of the order and compliance verification for an online-only item like this adds another 1-2 business days before the item ships from the distributor.
- Can I return it if it doesn't fit?
- Returns on firearms are subject to strict federal regulations and distributor policy. Due to its status as a serialized item, it generally cannot be returned for a fit or preference issue once the transfer at your FFL is complete. Inspect the rifle thoroughly with your dealer before completing the Form 4473 and taking possession.
- Does this work with a suppressor?
- Potentially, but not without modification. The 22-inch barrel has a standard 5/8x24 thread pitch under the crowned muzzle, but it is not threaded from the factory. Adding threads for a suppressor requires a competent gunsmith to lathe-cut the barrel, which costs approximately $150-$200 and may affect the crown and accuracy if done poorly.
- Is the magazine compatible with other Savage Axis models?
- The 4-round detachable steel magazine is specific to the Savage Axis and Axis II series in standard calibers. It will not function in a Savage 110 series rifle. Spare magazines, part number 109344, are available directly from Savage or retailers like MidwayUSA for about $35 each.