Savage AXIS 2 XP 22-250 Rem Left Hand 22in FDE w/ 3-9×40
About this product
What is the Savage AXIS 2 XP 22-250 Rem Left Hand 22in FDE with 3-9×40? It's a left-handed, factory-scoped bolt-action rifle designed as a ready-to-hunt package for varmint shooters and lefties who want to avoid the compromises of right-handed actions. This rifle comes with a 4-round detachable magazine and a user-adjustable AccuTrigger factory-set to break at 2.5 pounds. Chambered in the flat-shooting 22-250 Remington, it prioritizes practical field use over custom benchrest precision.
What is the Savage AXIS 2 XP 22-250 Rem used for?
It's used for fast, precise varmint control out to 300 yards and as a training rifle for left-handed shooters. The 22-250 Remington cartridge produces over 3,600 feet per second muzzle velocity, making it excellent for minimizing wind drift on prairie dogs and coyotes. The factory-boresighted 3-9×40 scope gets you on paper at 100 yards in under 5 minutes, skipping the typical half-hour of zeroing.
How does the Savage AXIS 2 XP compare to the Stevens 334 Rifle?
The Savage AXIS 2 XP provides a complete, ready-to-shoot package, while the Stevens 334 Rifle is a bare rifle requiring separate optics. The AXIS 2 XP's included AccuTrigger is superior for precise shot control, adjustable from 2.5 to 6 pounds without tools, whereas the Stevens 334 uses a simpler fixed trigger. For the left-handed shooter needing immediate field readiness, the AXIS 2 XP is the better value.
What does it weigh and what are the dimensions?
The rifle weighs 7.7 pounds with the empty magazine installed and measures 42.25 inches in overall length. The barrel alone is a 22-inch sporter contour with a 1-in-14 twist rate, providing optimal stabilization for lighter varmint bullets. From trigger to the end of the buttstock, the length of pull is 13.75 inches, fitting most adult shooters without modification.
Who is this NOT for?
It's not for precision long-range benchrest competitors or NFA enthusiasts building Short-Barreled Rifles (SBRs). The synthetic stock lacks the rigid bedding and chassis system needed for consistent sub-MOA groups beyond 400 yards. The 22-inch barrel also makes SBR conversion impractical, as cutting it would require Form 1 paperwork for minimal ballistic gain—unlike our reviewed suppressor-ready platforms.
What's in the box?
You receive the rifle with mounted 3-9×40 scope, one 4-round detachable box magazine, a trigger adjustment tool, and a basic owner's manual. The scope is factory-boresighted, meaning it should put rounds on a standard silhouette target at 25 yards right from the box. You'll need to supply your own ammunition—about 40 rounds for a proper zero—and a set of hex wrenches for final torque on the scope rings.
Is the Savage AXIS 2 XP worth it at $510.99?
At $510.99, it's worth it for left-handed varminters who value time over tinkering. That price includes a functional scope that would cost $90 separately, saving you the gunsmithing fee for mounting and leveling. Compared to building a similar left-handed rifle piecemeal, you're saving approximately $150 and 3 hours of assembly time, making it a cost-effective first rifle or dedicated truck gun.
Specs at a glance
Video review
Pros & cons
What works
- Left-handed bolt throw eliminates right-hand ergonomic compromises
- AccuTrigger adjustable from 2.5 to 6 lbs without disassembly—factory set at 2.5 lbs
- Includes boresighted 3-9×40 scope, saving $90+ and 30 minutes of initial setup
- 4-round detachable magazine reloads 2 seconds faster than fixed blind magazines
Trade-offs
- Synthetic stock flexes under bipod pressure—adds 0.3-0.5 MOA variance versus bedded actions
- Non-threaded barrel requires $120-180 gunsmith work for suppressor compatibility
- Scope turret adjustments are ¼ MOA clicks, not the finer ⅛ MOA preferred for long-range varminting
Expert review
Key attributes
| upc | 011356321947 |
| manufacturer | Savage |
| manufacturer part number | 32194 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 22" |
| caliber/gauge | .22-250 Remington |
| capacity | 4 + 1 |
| color | Black |
| length | 48.9500 |
| number of magazines | 1 4 rd. Detachable Box |
| package height | 3.4 |
| package width | 8.3 |
| product type | Rifle |
| shipping weight | 10.15 |
| sights | No Sights |
Frequently asked questions
- Is the scope compatible with aftermarket mounting rings?
- Yes, the included scope uses standard 1-inch tube diameters and fits any commercial 1-inch rings. The factory-supplied bases are Savage standard weaver-style, which accept most common ring systems from manufacturers like Warne or Leupold. You can swap the optic in about 15 minutes with a torque wrench set to 18 inch-pounds.
- Does it fit in a standard rifle case?
- Yes, it fits most 44-inch rifle cases with room to spare. The overall length of 42.25 inches allows it to slide easily into Plano All-Weather or Pelican 1750 cases without disassembly. For compact transport, you can separate the barreled action from the stock using a T15 Torx bit in under 2 minutes.
- Can I return it if the scope doesn't hold zero?
- Yes, Ironclad Armory accepts returns within 30 days of delivery for defective optics. The package must be returned with all factory components, including the original magazine and trigger tool. Expect the inspection and replacement process to take 10-14 business days from our receiving facility in Texas.
- Does this work with a suppressor?
- It can, but requires an aftermarket threaded barrel. The factory 22-inch barrel is not threaded, so adding a suppressor means either having a gunsmith thread the existing barrel ($120-180) or purchasing a pre-threaded replacement barrel. Both options require you to consider NFA regulations and proper mounting systems like SilencerCo's ASR or Dead Air's KeyMo.