Savage 110 Magpul Scout 6.5 Creedmoor LH 16.5″ Threaded
Pros & cons
What works
- Factory-threaded 16.5-inch barrel with 5/8”-24 threads — ready for a suppressor without a $250+ gunsmithing job.
- Magpul Hunter stock includes an aluminum bedding block — reduces action shift under recoil, improving consistency over standard polymer inlet stocks.
- Left-hand bolt configuration — eliminates the ergonomic friction and slower manipulation forced on left-handed shooters using right-hand actions.
- AccuTrigger is user-adjustable from ~2.5 to 6 lbs — provides a target-grade pull weight out of the box for about a $100 value.
Trade-offs
- No thread protector included — immediate aftermarket purchase required to protect the $0.75-inch muzzle crown during transport and storage.
- 8.4 lb unloaded weight — nearly 1.5 lbs heavier than some ultralight hunting rifles, noticeable on extended sling carries.
- Aggressive, modern aesthetics — the Magpul stock and full-length rail may not appeal to hunters preferring traditional wood and blued steel.
Video review
Expert review
Specs at a glance
About this product
What is the Savage 110 Magpul Scout 6.5 Creedmoor LH 16.5″ Threaded? It's a left-hand configuration, short-barreled bolt-action rifle built for hunters and precision shooters who require fast handling and regulatory-legal length with suppressor capability. Chambered in 6.5 Creedmoor with a 16.5-inch threaded barrel, it's engineered for those who shoot southpaw but refuse to compromise on modularity or ballistic efficiency.
What is the Savage 110 Magpul Scout 16.5" used for?
This rifle is primarily designed for short-to-medium-range hunting and mobile precision shooting where maneuverability and suppressor use are priorities. The 16.5-inch barrel keeps the overall length under 39 inches, making it ideal for navigating dense timber or vehicle transport, while the 1:8 barrel twist rate stabilizes the wide spectrum of modern 6.5 Creedmoor loads from 120-grain hunting projectiles up to 147-grain ELD-Match bullets.
How does the Savage 110 Magpul Scout compare to a Stevens 334 .308 Winchester?
The Savage 110 is a superior platform for precision work and suppressor adaptation compared to the the Stevens 334 Rifle | .308 Win, 20in Matte Black Synthetic. Specifically, the Savage’s AccuTrigger offers a smoother, crisper pull that’s user-adjustable down to approximately 2.5 pounds, while the Stevens feature-set is more basic and non-adjustable, better suited for utilitarian, budget-conscious applications where ultimate precision isn't the primary goal.
What does it weigh and what are the dimensions?
The rifle weighs 8.4 pounds unloaded and measures 38.5 inches in overall length from buttplate to muzzle threads. The barrel itself is 16.5 inches long with a 5/8”-24 thread pattern, yielding a balanced package that is 4.1 inches shorter and 1.3 pounds heavier than a typical 20-inch barreled, all-steel hunting rifle, directly impacting its swing speed and offhand stability.
Who is this NOT for?
This rifle is not for traditionalists seeking a classic wood-stocked hunting rifle or for budget-focused first-time buyers. The aggressive, tactical aesthetic of the Magpul stock and full-length rail alienates purists, and at nearly $936, it occupies a price bracket above entry-level bolt actions. For a shooter whose needs are simpler and budget tighter, the Stevens 334 .243 Win 20″ Bolt-Action Rifle — our editorial take offers a more straightforward, cost-effective introduction to centerfire bolt guns.
What's in the box?
You receive the barreled action seated in the Magpul Hunter stock, one 10-round AICS-pattern detachable magazine, and the factory-installed adjustable iron sights. Notably absent is any thread protector or muzzle device; you must source your own 5/8”-24 thread protector or suppressor mount immediately, a common oversight from manufacturers that leaves the crown unprotected during transit and initial handling.
Is the Savage 110 Magpul Scout worth it at $935.99?
Yes, for the left-handed shooter requiring a suppressor-ready SBR platform with immediate aftermarket support. The $936 price tag buys you a pre-blueprinted action, an adjustable target-grade trigger, and a chassis-like stock system that would cost over $300 separately. It bridges the gap between a custom build and a factory rifle, saving you approximately 15-20 hours of gunsmithing time for fitting and bedding a standard barreled action into an aftermarket stock.
Key attributes
| upc | 011356581808 |
| manufacturer | Savage |
| manufacturer part number | 58180 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 16.5" |
| caliber/gauge | 6.5mm Creedmoor |
| capacity | 10 + 1 |
| length | 49 |
| number of magazines | 1 10 rd. AICS Magazine |
| package height | 8.5 |
| package width | 3.75 |
| product type | Rifle |
| safety | 3 Position |
| shipping weight | 11.2 |
| sights | FS: AR-Style RS: Peep Sight |
| sights type | Adjustable Sights |
Frequently asked questions
- Is the barrel threading compatible with a SilencerCo Omega 300?
- Yes, the 5/8”-24 thread pattern is the standard for .30 caliber and many 6.5mm suppressors. The SilencerCo Omega 300 uses a Bravo mount system; you will need a Bravo ASR muzzle brake or flash hider in 5/8”-24, which installs in about 10 minutes with proper torque and Rocksett adhesive.
- Will the AICS magazine fit other Savage 110 models?
- It is compatible with any Savage 110 short-action footprint milled for a detachable AICS magazine box. This includes most modern 110 Tactical and Hunter models, but will NOT fit older 110s with internal blind magazines or proprietary Savage magazine systems without modification.
- Can the iron sights be removed for a low-mount optic?
- Yes, the factory-installed sights are attached to the full-length scout rail via removable screws. Removing them provides a continuous, unobstructed Picatinny rail spanning 12.5 inches for optics mounting, requiring only a set of hex keys and about 5 minutes to accomplish.
- Does the AccuTrigger require a special tool for adjustment?
- No special tool is required. Adjustment is performed with a 3/32-inch hex key to access the spring tension screw located inside the trigger shoe. The adjustment range is from approximately 2.5 pounds up to 6 pounds of pull weight; proper function-checking after adjustment is mandatory.