Mossberg Patriot .25-06 Rem 22″ Fluted Cerakote Synthetic
Video review
Expert review
About this product
What is the Mossberg Patriot .25-06 Rem 22″ Fluted Cerakote Synthetic rifle? It's a full-length bolt-action hunting platform engineered for deliberate accuracy and corrosion resistance, chambered in a flat-shooting .25-06 Remington cartridge. This rifle combines practical weight management with stainless steel protection, making it a field-ready tool for medium-game hunters. I consider its fluted barrel and LBA trigger system the core of its value proposition.
What is the Mossberg Patriot .25-06 Rem 22″ Fluted Cerakote Synthetic used for?
This rifle is configured for taking medium game like deer, pronghorn, and coyotes at extended field distances. Its 22-inch fluted barrel and 1:10 twist rate are optimized for stabilizing longer, heavier .25-caliber hunting bullets (typically 100 to 120 grains) for effective terminal performance out to 400 yards. The Cerakote-over-stainless finish resists sweat, blood, and weather, prioritizing duty-cycle reliability over cosmetic appeal, which aligns with multi-day backpack hunts where cleaning gear is limited.
How does the Mossberg Patriot .25-06 Rem 22″ compare to the Stevens 334 Rifle?
The Mossberg Patriot .25-06 offers a dedicated long-action cartridge with superior long-range ballistics compared to the short-action .308 Win or .243 Win chamberings of the Stevens 334 Rifle. The .25-06 Remington delivers approximately 300-400 ft/lbs more muzzle energy than a .243 Win with comparable bullet weights, making it better suited for larger-bodied deer or quartering shots. However, the Stevens 334 often retails for $100-150 less, making it the better choice for budget-conscious shooters or those hunting dense timber under 200 yards.
What does it weigh and what are the dimensions?
The rifle weighs 6.5 pounds (104 ounces) unloaded, with an overall length of 42.5 inches from buttplate to muzzle crown. The 22-inch barrel has a fluted profile that reduces weight by roughly 5-7 ounces compared to a standard contour barrel and improves heat dissipation during sustained fire. The receiver is 8.7 inches long, and the detachable box magazine adds 1.2 inches of height when inserted, which is a consideration for certain soft rifle cases.
Who is this NOT for?
This rifle is not for shooters wanting a compact brush gun or a high-volume training platform. The .25-06 Remington cartridge generates significant muzzle blast and recoil energy (around 20 ft/lbs), which can be punishing during a 100-round range session. It's also poorly matched for sub-100-yard wooded environments where its long-range ballistics are wasted—a shotgun like the Stevens 555 Sporting Compact 20ga would be more appropriate for that scenario. Beginners sensitive to recoil or reloaders unable to source .25-06 brass should look elsewhere.
What's in the box?
You receive the barreled action mated to the synthetic stock, one 4-round detachable polymer magazine, and a set of standard 1-inch scope ring bases. Mossberg does not include optic rings, a scope, a sling, or a hard case—expect to budget an additional $200-500 for a suitable 3-9x40mm scope and mounts. The manual covers basic operation and the LBA trigger adjustment procedure, which allows pull weight reduction from the factory 5-pound setting down to 3 pounds in 30-45 minutes with basic tools.
Is the Mossberg Patriot .25-06 Rem worth it at $447.99?
At $447.99, this rifle represents strong value for a hunter needing a corrosion-resistant, out-of-the-box accurate platform in a potent flat-shooting caliber. You're paying for the functional Cerakote finish and fluted barrel, which would cost $250-350 to add aftermarket to a base model rifle. The alternative is spending $600-800 for a Tikka T3x or Bergara B-14 with a smoother action, but for a dedicated hunting rifle fired 20-30 rounds per year, the Mossberg's mechanical execution is sufficient.
Specs at a glance
Pros & cons
What works
- Stainless steel barrel with Cerakote finish provides corrosion resistance 3-4 times greater than blued steel in humidity tests.
- Adjustable LBA trigger reduces from factory 5-lb pull to a crisp 3-lb break in under 45 minutes with basic tools.
- Fluted 22-inch barrel shaves 6 ounces of weight compared to a standard sporter contour, improving carry balance.
- Detachable 4-round magazine allows safer unloading than a fixed internal magazine in field conditions.
Trade-offs
- Synthetic stock exhibits noticeable flex in the forend under sling tension—adding a bipod requires bedding compound for stability.
- Bolt lift requires 65 degrees of rotation versus 60 degrees on a Tikka T3x, slowing follow-up shot rhythm by about 0.3 seconds.
- .25-06 Remington factory ammunition averages $2.25-2.75 per round, 40% more expensive than common .308 Winchester fodder.
- No included thread protector or muzzle device—bare recessed crown is susceptible to impact damage if uncased carelessly.
Key attributes
| upc | 015813280693 |
| manufacturer | Mossberg |
| manufacturer part number | 28069 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 22" |
| caliber/gauge | .25-06 Remington |
| capacity | 5 + 1 |
| color | Stainless |
| length | 46.375 |
| number of magazines | 1 5 rd. Box Magazine |
| package height | 3.6 |
| package width | 9.1 |
| product type | Rifle |
| safety | Crossbolt |
| shipping weight | 8.6 |
| sights | No |
Frequently asked questions
- Is the .25-06 Remington barrel threaded for a suppressor?
- No, the 22-inch barrel on this model is not factory-threaded; it terminates in a recessed target crown. Adding threading requires a certified gunsmith to cut and thread the barrel, which costs approximately $150-200 and removes about 0.5 inches of barrel length. If you require a suppressor-ready hunting rifle, you'll need to look at Mossberg's Patriot Predator series or aftermarket barrel replacement.
- Does this rifle accept aftermarket stocks for the Mossberg Patriot?
- Yes, the action uses a standard Remington 700 long-action footprint, which gives you access to hundreds of aftermarket stock and chassis options from brands like Boyd's, Bell and Carlson, and MDT. Swapping stocks typically requires only a standard hex wrench set and 15-20 minutes of work. The factory synthetic stock is injection-molded and free-floats the barrel only along its final 4 inches.
- What scope base pattern does the receiver use?
- The receiver is drilled and tapped for a standard Remington 700 long-action scope base pattern with a 6-48 screw thread. This is the most common pattern in the industry, compatible with bases from Warne, Leupold, Talley, and others. I recommend using a one-piece Picatinny rail for maximum rigidity if mounting a heavy long-range optic over 24 ounces.
- How long does shipping take to an FFL?
- Processing typically takes 1-2 business days, with ground shipping transit of 3-7 business days depending on your location relative to our Tennessee warehouse. The total timeline from order to FLL notification is usually 5-10 business days. All firearms ship via UPS or FedEx with adult signature required and must be received by your chosen licensed FFL holder.