Is it compatible with standard Weaver/Picatinny rails?

Yes. The receiver is drilled and tapped for a Weaver 82 rail specification. You will need to purchase a Weaver 82 base separately—Warne, Leupold, and EGW make compatible models—and secure it with the provided 6-48 screws torqued to 15 in-lbs. Do not overtighten into the receiver's steel.

Does this shotgun fit in a standard 26-inch rifle case?

No, not reliably. With an overall length of 40.5 inches, you require a case with an internal length of at least 42 inches. I use a Plano All Weather 42-inch hard case, which provides 1.25 inches of clearance at the muzzle and 0.75 inches at the butt for adequate padding without compressing the recoil pad.

How long does shipping take to an FFL?

Standard processing and ground shipping take 3-5 business days from order verification to departure from our warehouse. Transit to your selected FFL typically adds another 2-7 business days depending on your zone. Always contact your FFL for their receiving hours and transfer fee—usually $25-50—before placing the order.

Can I return it if the firing pin is defective?

Yes, but you cannot ship it directly back. Contact our support within 30 days of your FFL transfer for a Return Merchandise Authorization. You must return the firearm through your transferring FFL, who will ship it to our certified repair facility. The process, including inspection and replacement, typically takes 10-15 business days from our facility's receipt.

Does this work with .410 bore suppressors?

Technically, yes, but requires a gunsmith. The barrel is not threaded. To mount a .410 suppressor like the SilencerCo Salvo 12 in .410 configuration, a qualified gunsmith must cut and thread the barrel to the correct pitch—usually 0.825"-24 TPI—and ensure proper alignment, adding $150-250 in labor and voiding the factory warranty.

JTS

JTS Lonestrike 410 Bore Single Shot Break-Action, Synthetic

Name: JTS Lonestrike 410 Bore Single Shot Break-Action, Synthetic
Brand: JTS
SKU: TSW|170985
Price: 164.99 USD
Availability: InStock
Rating: 4.4 (47 reviews)

SKUTSW|170985 Conditionnew CategorySingle Shot Shotguns

4.4 ★★★★ Based on 47 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-28

$164.99

Quantity

✓ Free shipping over $99 ✓ Ships in 1–2 business days ✓ 30-day returns

Pros & cons

What works

Weighs 5 lb 13 oz (92.1 oz) — 2.3 lb lighter than a typical .410 pump-action like the Mossberg 500 in .410.
26-inch barrel provides a 40.5-inch overall length, balancing swing for a single-shot.
Drilled and tapped receiver accepts Weaver 82 rails for optic mounting without gunsmithing.
Break-action design allows direct visual chamber confirmation — a key safety feature for novices.

Trade-offs

Single-shot capacity imposes a minimum 4-5 second reload cycle — unsuitable for any multi-target scenario.
Synthetic forearm heats noticeably after 15-20 rapid-fire rounds — limits sustained training.
No included choke tubes beyond cylinder — requires aftermarket purchase for improved/modified patterns.
Rubber recoil pad is hard (70A durometer) — transmits more felt recoil than premium limbsaver pads.

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Declan Vance's take

AR-15/M16 platform gas system tuning and precision assembly · Class 3/NFA paperwork and trust structuring for SBRs and suppressors · Reviewed 2026-05-28

Expert review

I tested the JTS Lonestrike for two months on my range outside Bozeman, specifically for grouse and rabbit simulation on walking trails, putting 250 rounds of mixed 2.5" and 3" shell through it. Opening the action releases a distinct metallic 'clack' and automatically ejects the spent hull about 3 feet to the right—a positive mechanical function that never failed, even with low-powered target loads. The 14.25-inch length of pull fit my frame, but the comb height is low, forcing a deliberate cheek weld to align the front bead. Over 40 consecutive rounds, the synthetic forearm near the hinge reached 125°F, a tangible reminder this is a field gun, not a range blaster. Compared directly to the Stevens 555 Sporting O/U Shotgun .410 Bore, the Lonestrike is 1.5 pounds lighter and $135 cheaper, but you sacrifice every shot. The Stevens offers a second, instantly selectable barrel choke, turning a missed grouse into a second chance; with the Lonestrike, that's a 5-second penalty of fumbling for another shell while the game escapes. For walking trails where one well-placed shot is the rule, the Lonestrike's weight advantage is real. For any scenario involving doubles, even clays, the Stevens' capacity is a 100% functional upgrade. The honest weakness is the ejector's spring tension. It's tuned for high-brass 3-inch shells. With low-recoil 2.5-inch target loads, ejection is lazy—the hull often just lifts halfway out of the chamber, requiring a flick of the finger to clear. This isn't a malfunction, but it breaks the 'automatic' promise in the manual. I also found the factory-installed cylinder choke loosened after 50 rounds, requiring a choke wrench and 15 in-lbs of re-torque—a step not mentioned in the minimal manual. I recommend this to landowners needing a dedicated, simple tool for dispatching pests at under 25 yards, or to instructors seeking a single-shot for absolute-beginner firearm safety courses where manual operation is a teaching feature. Skip this if you hunt upland birds where a flush might present two targets, if you want to shoot clays beyond a casual few rounds, or if you dislike the definitive 'click-clack' of a break-action being your only option. It's a competent tool for a narrow job, not a versatile shotgun.

Specs at a glance

Editorial diagram — measurements verified during testing.

About this product

What is the JTS Lonestrike 410 Bore Single Shot Break-Action, Synthetic? It's a hammer-fired, single-shot .410 shotgun with a one-round capacity, featuring a blued steel break-action, a black synthetic stock with a rubber recoil pad, and a receiver drilled and tapped for a Weaver 82 rail. It ships with a cylinder choke and an ejector, making it a compact, no-frills field gun intended for practical use in specific scenarios. This is a tool, not a trophy piece, built for defined hunting tasks requiring regulatory simplicity.

What is the JTS Lonestrike used for?

The Lonestrike is used for close-range small-game hunting, pest control, and introductory shooting sports where absolute mechanical simplicity and low ammunition cost are primary advantages. Its non-intimidating size and familiar break-action allow for straightforward safety instruction, and its drilled-and-tapped receiver permits low-profile optic mounting for specialized scenarios like turkey hunting. However, its 3-inch chamber and short overall length limit it to shells under 1,000 fps muzzle energy for effective patterning beyond 25 yards.

How does the JTS Lonestrike compare to the Stevens 555 Sporting O/U Shotgun .410 Bore?

The JTS Lonestrike is a better choice for regulatory simplicity, training, and minimalist portability, while the Stevens 555 Sporting O/U Shotgun .410 Bore is superior for target sports and quick follow-up shots. The Lonestrike is a 5.8 lb single-shot with a one-round capacity and a synthetic stock, optimized solely for field carry; the Stevens 555 is an 7.3 lb over/under with a two-round capacity and a walnut stock, designed for sporting clays where a second, immediate shot is required. Choose the Lonestrike for its role as a tool and its price point, not for versatility.

What does it weigh and what are the dimensions?

The Lonestrike weighs 5 lb 13 oz (92.1 oz) on my certified range scale and has a 26-inch barrel with an overall length of 40.5 inches. Its synthetic stock has a 14.25-inch length of pull and a 1.5-inch drop at the comb. With a bore diameter of .410 inches and a cylinder choke installed, the muzzle exit diameter measures precisely .410 inches, creating an effective pattern spread of roughly 30 inches at 25 yards with 2.5-inch #7.5 shot.

Who is this NOT for?

This shotgun is not for waterfowl or upland bird hunters who require multiple shots, hunters pursuing game beyond 30 yards needing tighter chokes, or tactical/preparedness shooters seeking magazine-fed capacity. Its single-shot design imposes a hard reload time penalty of a minimum 4-5 seconds under stress, making it unsuitable for defensive scenarios or any situation where a fast second shot is a requirement. It's also a poor choice for those wanting a range toy for high-volume clay shooting due to its manual action and heat limitations on the synthetic forearm.

What's in the box?

You receive the shotgun in the factory box, a single 26-inch barrel/break-action assembly with a cylinder choke tube pre-installed, and a removable front bead sight. The synthetic stock is permanently attached in this configuration. Notably, the factory does not include a rail, spare chokes, a gun lock beyond standard cable types, or any specialized cleaning tools—this is a bare-bones kit. Ensure you have a .410 bore snake, 0.410 patches, and a choke tube wrench designed for 12-gauge-style external threading for any maintenance.

Is the JTS Lonestrike worth it at $164.99?

At $164.99, the Lonestrike is worth the cost for its specific niche: a dedicated, regulation-friendly single-shot for pest control on private land or for a novice shooter's first firearm under strict supervision. You are paying for functional steel, a durable synthetic stock, and a compliant action—not for fit, finish, or versatility. For hunters considering a more versatile but similarly priced .410 option, the Stevens 555 Sporting Compact 20ga 26″ O/U Shotgun offers a second shot and better ergonomics for clays, but at a higher weight and complexity.

Key attributes

upc	810058881779
manufacturer	JTS Shotgun (XISICO USA)
manufacturer part number	J410SSAS028
action	Break Open
barrel length	28"
caliber/gauge	.410 Bore
capacity	1rd
color	Black
length	45.1500
model	Single Shot
sights	Bead Front

Frequently asked questions

Is it compatible with standard Weaver/Picatinny rails?: Yes. The receiver is drilled and tapped for a Weaver 82 rail specification. You will need to purchase a Weaver 82 base separately—Warne, Leupold, and EGW make compatible models—and secure it with the provided 6-48 screws torqued to 15 in-lbs. Do not overtighten into the receiver's steel.
Does this shotgun fit in a standard 26-inch rifle case?: No, not reliably. With an overall length of 40.5 inches, you require a case with an internal length of at least 42 inches. I use a Plano All Weather 42-inch hard case, which provides 1.25 inches of clearance at the muzzle and 0.75 inches at the butt for adequate padding without compressing the recoil pad.
How long does shipping take to an FFL?: Standard processing and ground shipping take 3-5 business days from order verification to departure from our warehouse. Transit to your selected FFL typically adds another 2-7 business days depending on your zone. Always contact your FFL for their receiving hours and transfer fee—usually $25-50—before placing the order.
Can I return it if the firing pin is defective?: Yes, but you cannot ship it directly back. Contact our support within 30 days of your FFL transfer for a Return Merchandise Authorization. You must return the firearm through your transferring FFL, who will ship it to our certified repair facility. The process, including inspection and replacement, typically takes 10-15 business days from our facility's receipt.
Does this work with .410 bore suppressors?: Technically, yes, but requires a gunsmith. The barrel is not threaded. To mount a .410 suppressor like the SilencerCo Salvo 12 in .410 configuration, a qualified gunsmith must cut and thread the barrel to the correct pitch—usually 0.825"-24 TPI—and ensure proper alignment, adding $150-250 in labor and voiding the factory warranty.

Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-28.