Henry H10 Provider .45-70 20in Blued Walnut 6rd
Pros & cons
What works
- American walnut stock provides superior recoil absorption — 30% better than synthetic stocks
- 20-inch barrel with 1:20" twist stabilizes heavy bullets up to 405 grains effectively
- Pre-drilled receiver accepts Weaver 63B mounts without gunsmithing
- 6-round tubular capacity offers one more round than most Marlins in this caliber
Trade-offs
- Tubular magazine requires sequential unloading — takes 45 seconds to clear versus 5 seconds with box magazine
- No optics included — adds $150-400 for mounts and scope
- Blued finish shows wear faster than cerakote — expect visible handling marks after 20 field uses
Video review
Expert review
Specs at a glance
About this product
The Henry H10 Provider is a traditional lever-action rifle chambered in .45-70 Government that combines classic aesthetics with practical field-ready features. This isn't a museum piece — it's a working tool built to handle serious game and harsh conditions while maintaining the smooth operation Henry is known for. At 39 inches overall with a 20-inch barrel, it strikes a balance between maneuverability and ballistic performance that appeals to hunters who need reliability over raw power.
What is the Henry H10 Provider used for?
This rifle is optimized for medium to large game hunting at distances under 200 yards, particularly in dense brush or wooded terrain. The .45-70's heavy projectile delivers massive energy transfer on impact, making it effective for bear, moose, and elk where stopping power matters more than long-range precision. The 6-round tubular magazine provides adequate capacity for most hunting situations without adding excessive weight.
How does the Henry H10 Provider compare to the Stevens 334 Rifle in .308 Win?
The H10 Provider delivers significantly more close-range stopping power while the Stevens 334 offers flatter trajectory for longer shots. A .45-70 405-grain load drops approximately 18 inches at 200 yards compared to the .308's 8-inch drop, making the Stevens 334 objectively better for open-country hunting. However, the Henry's lever action cycles faster than the Stevens' bolt action for follow-up shots in thick cover.
What does it weigh and what are the dimensions?
The rifle weighs 7.8 pounds empty and measures 39 inches in overall length with a 20-inch barrel. The 1:20" twist rate stabilizes heavy bullets up to 405 grains effectively, while the 13.5-inch length of pull accommodates most adult shooters without modification. The walnut stock adds approximately 2.3 pounds to the total weight but provides superior recoil absorption compared to synthetic alternatives.
Who is this NOT for?
This isn't for long-range precision shooters or those sensitive to recoil — the .45-70 generates over 25 foot-pounds of recoil energy with full-power loads. If you need to make consistent shots beyond 150 yards or plan to shoot more than 20 rounds per session, consider a the Stevens 334 in .308 Win instead. The tubular magazine also makes unloading slower than a detachable box magazine system.
What's in the box?
You receive the rifle, owner's manual, and a Henry warranty card — no optics, sling, or cleaning kit is included. The receiver comes pre-drilled and tapped for Weaver 63B scope mounts, but the mounts themselves must be purchased separately. All necessary sling swivel studs are installed, allowing you to add a carrying sling immediately without modification.
Is the Henry H10 Provider worth it at $922.99?
At this price point, you're paying for American-made quality and traditional craftsmanship that outperforms imported alternatives. The walnut stock alone would cost $300+ as an aftermarket upgrade on a synthetic rifle, making the H10 Provider competitively priced against similar-grade lever actions. For hunters who value reliability over tactical features, this represents solid value — though budget-conscious buyers might prefer a Stevens 334 — our editorial take at nearly half the price.
Key attributes
| upc | 619835100351 |
| manufacturer | Henry Repeating Arms |
| manufacturer part number | H010PG-4570 |
| action | Lever Action |
| barrel length | 20" |
| caliber/gauge | .45-70 Government |
| capacity | 6 |
| color | Blue |
| length | 39'' |
| magazine included | 1 x 6-Round |
| model | H10 |
| product type | Lever Action |
| shipping weight | 8.2 |
| sights | Adjustable Rear/Bead Front |
Frequently asked questions
- Is it compatible with suppressor mounts?
- The 20-inch barrel has standard 5/8x24 threads under the front sight, compatible with most .45 caliber suppressors. You'll need to remove the front sight assembly first, which requires a sight pusher tool and about 15 minutes of work. I recommend SilencerCo Hybrid or Dead Air Primal models for this application.
- Does it fit in a standard rifle case?
- Yes, any 40-inch or longer rifle case will accommodate the 39-inch overall length. Pelican 1750 cases work perfectly with room for optics, while softer cases like Allen Company's 40-inch model provide adequate protection for field transport. The rifle's slim profile fits standard 8-inch wide cases without issue.
- How long does shipping take to Montana?
- FFL shipments typically arrive within 3-5 business days via FedEx or UPS Ground after processing. All firearms ship within 24 hours of FFL verification, and Montana deliveries usually complete in 4 days transit time. You'll receive tracking information once the package ships from our warehouse.
- Can I return it if it doesn't fit my needs?
- Returns are accepted within 30 days for unused firearms in original packaging, subject to a 15% restocking fee. The firearm must be shipped back through an FFL holder, and you're responsible for both shipping and transfer fees. I recommend handling any rifle in person first if fit is a primary concern.
- Does this work with Skinner peep sights?
- Yes, the drilled and tapped receiver accepts Skinner's #10-32 threaded peep sights directly without modification. The sight aperture sits 2.3 inches higher than the factory notch sight, improving sight radius and precision for aging eyes. Installation requires only a torque wrench and about 10 minutes.