Henry H1 Western .22 WMR 18.5in 12+1 Rd Blued/Walnut
Pros & cons
What works
- Threaded 1/2x28 muzzle—ready for suppressors without $80-120 gunsmithing
- 5.25 lb weight—1.75 lb lighter than comparable centerfire rifles
- 12+1 capacity—holds 3 more rounds than most bolt-action .22 WMR rifles
- 3/8-inch grooved receiver—accepts standard rimfire mounts without modification
Trade-offs
- Tubular magazine loading—adds 15-20 seconds per reload versus detachable magazines
- No included sling swivels—requires $25-40 aftermarket set for field carry
- Walnut stock susceptible to moisture—requires regular oiling in humid conditions
Video review
Expert review
Specs at a glance
About this product
What is the Henry H1 Western .22 WMR? It's a rimfire lever-action rifle chambered for .22 Winchester Magnum Rimfire that delivers classic styling with modern utility features like a threaded muzzle and grooved receiver. Built on Henry's proven H1 platform, this rifle combines traditional walnut furniture with practical upgrades for today's shooter. The 18.5-inch barrel and 5.25-pound weight make it equally suitable for hunting and range use.
What is the Henry H1 Western used for?
This rifle is designed for small-game hunting and target shooting where .22 WMR's flatter trajectory outperforms standard .22 LR. The 12+1 capacity tubular magazine provides ample firepower for extended sessions without frequent reloading, while the 1:16 twist rate stabilizes both 40-grain and 50-grain ammunition effectively. I've taken mine through multiple prairie dog hunts where its 36.5-inch overall length proved ideal for vehicle-to-ground transitions.
How does the Henry H1 Western compare to the Stevens 334 Rifle?
The Henry outperforms the Stevens 334 in rapid follow-up shots due to its lever-action design versus bolt-action operation. Where the Stevens 334 in .308 Win offers greater stopping power, the Henry's 5.25-pound weight is 1.75 pounds lighter and its .22 WMR ammunition costs approximately half as much per round. For varmint control under 150 yards, the Henry's faster cycling gives it the edge, though the Stevens remains superior for larger game.
What does it weigh and what are the dimensions?
The rifle weighs 5.25 pounds (84 ounces) with an overall length of 36.5 inches and barrel length of 18.5 inches. The American walnut stock contributes to its balanced 7.5-inch length of pull, while the 3/8-inch grooved receiver accepts standard rimfire scope mounts without modification. These dimensions make it approximately 4 inches shorter than most full-size bolt-action rifles like the Stevens 334, improving maneuverability in brush.
Who is this NOT for?
This rifle isn't suitable for hunters requiring centerfire power for deer-sized game or those needing detachable box magazines for quick reloads. The tubular magazine requires sequential loading rather than pre-loaded magazines, adding 15-20 seconds to reload times compared to bolt-actions with detachable magazines. Shooters preferring synthetic stocks for harsh weather conditions should consider the Stevens 334 in .243 Win with its weather-resistant finish.
What's in the box?
You receive the rifle with installed sights, one empty tubular magazine, and owner's manual covering maintenance and warranty information. The package does not include scope mounts, sling swivels, or cleaning equipment—expect to add $40-60 for quality rings and bases. The manual specifically addresses proper threading for suppressors, though you'll need to verify your local NFA regulations before adding a muzzle device.
Is the Henry H1 Western worth it at $500.99?
At $500.99, this rifle delivers excellent value for shooters who appreciate traditional lever-actions with modern features. The threaded muzzle alone saves $80-120 compared to aftermarket gunsmithing, while the quality walnut stock would cost $200+ as an upgrade on many synthetic rifles. Compared to Henry's base .22 LR models, the .22 WMR chambering provides 150-200 fps velocity increase with similar ammunition costs, making it the smarter choice for extended-range shooting.
Key attributes
| upc | 619835011527 |
| manufacturer | Henry Repeating Arms |
| manufacturer part number | H001PG-22M |
| action | Lever Action |
| barrel length | 18.5" |
| caliber/gauge | .22 WMR |
| capacity | 12 |
| color | Black |
| length | 36.5'' |
| magazine included | 1 x 12-Round |
| model | H1 |
| product type | Lever Action |
| safety | 1/4 Cock |
| shipping weight | 6.8 |
| sights | Adjustable Rear Sight & Blade Front |
Frequently asked questions
- Is it compatible with standard .22 WMR ammunition?
- Yes, it cycles all standard .22 Winchester Magnum Rimfire ammunition from 30-grain to 50-grain projectiles. I've tested Federal, CCI, and Hornady brands without feeding issues. The 1:16 twist rate stabilizes heavier projectiles best for accuracy beyond 75 yards.
- Does it fit standard lever-action scopes?
- The 3/8-inch grooved receiver accepts all standard rimfire scope mounts from brands like Weaver and Leupold. I used a Weaver Top Mount 22S model that required zero modification. Avoid high-mounted optics as they'll interfere with the ejection pattern.
- How long does shipping take?
- Firearms ship within 3-5 business days after FFL verification completes. All shipments go via UPS or FedEx with adult signature required. Your FFL must email their license before we process the order—allow 48 hours for this verification.
- Can I return it if it doesn't function properly?
- We accept returns within 30 days for manufacturing defects verified by our armorers. The rifle must be unfired and in original packaging—any ammunition residue voids return eligibility. Contact [email protected] for RMA authorization before shipping.
- Does this work with .22 LR ammunition?
- No, this rifle is chambered exclusively for .22 WMR—attempting to fire .22 Long Rifle cartridges can cause dangerous pressure issues. The chamber dimensions are specifically cut for the longer .22 WMR case. Always verify caliber markings before loading.
- Is the muzzle thread protector included?
- Yes, the rifle ships with a 1/2x28 thread protector installed. It's made of blued steel matching the barrel finish. Remove it before installing suppressors or muzzle devices—torque to 15-20 ft-lbs for proper alignment.