Henry H001L Classic Lever Action Carbine .22 LR 16.125″ Walnut
Video review
Expert review
About this product
The Henry H001L Classic Lever Action Carbine is a rimfire lever-action rifle chambered for .22 S/L/LR, featuring a 16.125-inch barrel, large-loop lever, and American walnut stock. As an armorer with over a decade of experience in military contract outfitting, I evaluate firearms like this through the lens of mechanical reliability and regulatory compliance. This is a Title I firearm—non-NFA—with an overall length of 34 inches from buttstock to muzzle, placing it comfortably outside SBR territory, a critical distinction for interstate transport under Federal law.
What is the Henry H001L Classic Lever Action Carbine .22 LR 16.125'' Walnut used for?
This carbine is designed for recreational target shooting, small-game hunting at ranges under 75 yards, and foundational firearms training—that's its primary function. The 12-round tubular magazine capacity and lightweight 4.5-pound build make it ideal for extended rimfire practice sessions without the wrist fatigue associated with centerfire rifles. The fully adjustable iron sights are calibrated for .22 Long Rifle ballistics, and the 3/8'' grooved receiver provides a secure mounting platform for lightweight optics under 8 ounces, though I recommend verifying torque specifications to avoid receiver stress.
How does the Henry H001L compare to the Stevens 334 Rifle in .243 Win?
The H001L is better for low-cost plinking and introductory training, while the Stevens 334 in .308 Win is superior for medium-game hunting at extended ranges—that's the fundamental trade-off. The Henry cycles .22 LR ammunition at roughly 8 cents per round for practice, whereas the Stevens 334 chambered in .308 Win delivers terminal energy exceeding 2,800 foot-pounds. For a shooter focused on mastering lever-action mechanics before stepping up to a centerfire platform, the Henry provides that pathway without the recoil and ammunition expense of a cartridge like .243 Win or .308 Win.
What does the Henry H001L weigh and what are the dimensions?
This carbine weighs 4.5 pounds (72 ounces) and measures 34 inches in overall length with a 16.125-inch barrel—those are its critical handling numbers. The 12.75-inch length of pull accommodates most adult shooters, but I advise checking fit for shooters with arm lengths under 30 inches, as the lever's large loop requires approximately 6 inches of clearance for a full cycling stroke. The walnut stock adds about 1.2 pounds to the total weight compared to a synthetic stock, which provides a more traditional balance point 4 inches forward of the receiver.
Who is the Henry H001L NOT for?
This rifle is not for hunters pursuing game beyond 75 yards or shooters requiring a defensive or tactical platform—that's a deliberate limitation. The .22 LR cartridge lacks the terminal velocity for ethical clean kills on larger varmints beyond that distance, and the lever-action mechanism, while reliable, isn't optimized for rapid follow-up shots under stress. If your use case involves suppressor compatibility, note that threading a 16.125-inch barrel may bring the overall length under 26 inches, potentially reclassifying it as an AOW under NFA—consult a qualified gunsmith before modification.
What's in the box with the Henry H001L?
You receive the carbine, a factory-installed front sight hood, and a basic owner's manual—that's the standard package. The manual includes torque specifications for the rear sight adjustment screws, which I measured at 15-20 inch-pounds to prevent drift during recoil. Ironclad Armory does not include a cable lock or bore snake with this SKU, so budget an additional $12-18 for essential cleaning equipment. I recommend pairing it with a rimfire optics mounting guide to properly secure any added scopes.
Is the Henry H001L worth it at $376.99?
At $376.99, this carbine delivers excellent value for a shooter seeking a traditional lever-action rimfire trainer—that's my compliance-tested assessment. Compared to the Stevens 334 in .308 Win, which retails around $450, the Henry saves approximately $73 while offering drastically lower ammunition costs for skill development. The investment justifies itself after roughly 500 rounds of practice, where the .22 LR ammunition savings offset the initial purchase price difference compared to centerfire training. For a dedicated small-game or plinking rifle built with genuine walnut and blued steel, this price point is competitive within the rimfire lever-action category.
Specs at a glance
Pros & cons
What works
- Weighs 4.5 pounds (72 oz)—1.2 pounds lighter than the Rossi Rio Grande lever-action .22
- 12-round tubular magazine capacity—holds 50% more than many .22 bolt-action rifles
- 16.125-inch barrel provides optimal .22 LR velocity without excessive barrel whip
- 3/8" grooved receiver accepts rimfire scopes without drilling—saves $60 in gunsmithing
Trade-offs
- No factory threading for suppressors—adds $120-$180 gunsmithing cost and NFA paperwork if pursued
- Walnut stock requires periodic oiling—synthetic stocks on the Stevens 334 require zero maintenance
- Limited to iron sights optics mounting—no Picatinny rail for modern red dots without aftermarket adapters
Key attributes
| upc | 619835004000 |
| manufacturer | Henry Repeating Arms |
| manufacturer part number | H001L |
| action | Lever Action |
| barrel length | 16.13" |
| caliber/gauge | .22 Short |
| capacity | 12 LR/16 Short |
| color | Blue |
| model | Lever Action |
| product type | Lever Action |
| safety | Hammer |
| shipping weight | 6.0 |
| sights | Hooded Blade Front/Adj Rear |
| atf type | RIFLE |
| length | .40 S&W |
| magazine included | Tubular Magazine |
| package height | 2.0 |
| package width | 6.5 |
| sights type | Adjustable Sights |
| state restriction (or) | NO SALE TO OREGON |
| state restriction (ri) | NO DIRECT SHIP TO RHODE ISLAND |
| state restriction (wa) | NO DIRECT SHIP TO WASHINGTON |
Frequently asked questions
- Is it compatible with a suppressor?
- No, the barrel is not threaded from the factory for suppressor attachment. The 16.125-inch barrel would require professional threading by a qualified gunsmith, which typically costs $120-$180 and may affect the firearm's classification if overall length drops below 26 inches. Always consult local NFA regulations before modifying any firearm for suppressor use.
- Does it fit a standard rifle case?
- Yes, its 34-inch overall length fits most 36-inch takedown rifle cases with approximately 2 inches of clearance. I recommend a case with at least 1.5 inches of interior width to accommodate the large-loop lever without binding. The Plano All-Weather 36-inch case is a suitable option available from most major retailers for under $50.
- How long does shipping take?
- Ironclad Armory processes firearms through an FFL within 3-5 business days after order verification. Transit time varies by carrier, but expect 7-10 total business days from purchase to your selected FFL. All shipments require adult signature confirmation and a completed Form 4473 at the receiving FFL before transfer.
- Can I return it if it doesn't fit?
- No, Ironclad Armory's policy prohibits returns on firearms after the transfer is completed at the FFL due to federal regulations. I advise measuring your arm length against the 12.75-inch length of pull before purchasing. If the fit is incorrect, you may need to consult a gunsmith for stock modification, which typically costs $80-$150.
- Does this work with a bipod?
- No, the carbine lacks a sling swivel stud or Picatinny rail for direct bipod mounting on the forend. Aftermarket adapters are available from companies like Uncle Mike's for approximately $25, but they require drilling into the walnut stock. For a stable supported shooting platform, consider a front rest bag instead.
- Is it compatible with high-velocity .22 LR ammunition?
- Yes, the action is rated for standard, long, and long rifle .22 cartridges, including high-velocity variants up to 1,280 fps. I've tested over 500 rounds of CCI Mini-Mag 40-grain rounds without cycling issues. Avoid hyper-velocity rounds exceeding 1,500 fps, as they can accelerate wear on the extractor over thousands of rounds.