Great Lakes GL-10 6.5 PRC 24″ AR-Style Rifle 5rd Pursuit Green
About this product
The Great Lakes GL‑10 6.5 PRC 24″ AR‑Style Rifle is a long‑action semi‑automatic precision rifle engineered for shooters who demand bolt‑action‑level ballistics in an AR‑platform chassis with ergonomics tuned for positional shooting. It bridges the gap between hunting‑weight bolt guns like the Stevens 334 and dedicated competition chassis systems, using a 24‑inch stainless barrel, billet 7075 aluminum receivers, and a fixed‑stock design to deliver consistency while remaining Title I compliant. Think of it as a precision rifle you can run hard without sacrificing the modularity and familiarity of an AR‑style handguard, trigger guard, and safety selector.
What is the Great Lakes GL‑10 6.5 PRC rifle used for?
I consider this rifle a purpose‑built tool for extended‑range target shooting, precision‑oriented hunting, and training scenarios where high‑round‑count repetition matters. The 6.5 PRC cartridge delivers around 1,450 ft‑lbs of muzzle energy and maintains supersonic velocity past 1,400 yards in ideal conditions, making it suitable for ELR (extreme long‑range) target work or elk‑sized game. The gas‑operated semi‑auto action allows for rapid follow‑up shots compared to a bolt‑action like the Stevens 334 in .308 Win, while the 20‑inch M‑LOK handguard supports bipods, night‑vision bridges, or extended accessory rails for competition or night‑hog setups.
How does the GL‑10 compare to the Stevens 334 rifle?
The GL‑10 trades some inherent bolt‑action rigidity and lighter weight for faster follow‑up shot capability and AR‑platform ergonomics. Where the Stevens 334 in .308 Win uses a 20‑inch chromoly barrel and a 42‑ounce polymer‑stock profile for a total weight around 6.8 lbs, the GL‑10’s 24‑inch stainless barrel and billet aluminum construction push its unloaded weight to 9.2 lbs — a 2.4‑lb penalty that aids shooter stability but reduces carry comfort. For a hunter who fires one or two shots from a stand, the Stevens 334 is the better choice; for a shooter engaging multiple targets at distance under time pressure, the GL‑10’s semi‑auto action and accessory‑ready handguard are the decisive advantages.
What does it weigh and what are the dimensions?
The rifle measures 45.5 inches in overall length, stands roughly 8.5 inches tall at the magazine well, and weighs 9.21 lbs (4.18 kg) without optics or a loaded magazine. That 24‑inch barrel contributes approximately 3.4 lbs to the total weight and adds 8 inches of length versus a typical 16‑inch carbine, which directly impacts balance and handling. The 20‑inch handguard provides 17.5 inches of continuous top rail and supports accessories up to 4.2 inches in diameter, while the Hogue fixed stock adds 1.8 inches of length‑of‑pull adjustment via included spacers.
Who is this NOT for?
This rifle is not ideal for tight‑quarters hunting, casual plinking, or anyone prioritizing light weight or minimal bulk. The 45.5‑inch overall length makes it unwieldy in dense brush or a standard‑size gun safe, and the 9.2‑lb unloaded weight feels front‑heavy without a bipod or shooting bag. If your primary use is casual target shooting under 600 yards or you’re building a collection of traditional sporting rifles, consider a lighter bolt‑action like the Stevens 334 in .243 Win instead — it’s more than 2 lbs lighter and nearly 5 inches shorter, while still delivering adequate precision for most hunters.
What’s in the box?
You receive the complete rifle with a 5‑round detachable aluminum magazine, three stock‑length spacers (0.25 in, 0.5 in, and 0.75 in), a chamber flag, and a basic operator’s manual covering disassembly and maintenance intervals. The rifle ships without optics, rings, a bipod, or a case — plan for an additional $300‑$600 in mounting hardware and transport protection. The included magazine weighs 5.8 ounces empty and interfaces with standard AR‑10‑pattern magazine catches, but note that 6.5 PRC‑specific magazines are not widely compatible with .308‑Win‑pattern magazines due to cartridge‑shoulder geometry differences.
Is the Great Lakes GL‑10 worth it at $1279?
At $1279, the GL‑10 justifies its cost if you specifically require a semi‑auto 6.5 PRC platform for training, competition, or hunting where rapid shot strings matter. The 416R stainless barrel, billet 7075 receivers, and 5R rifling represent about $750 in component value alone before assembly and headspacing, putting it $400‑$600 below similar custom‑built options. However, if your needs are met by a bolt‑action rifle and you don’t require the AR‑style ergonomics, you can acquire a capable Stevens 334 and a quality scope for the same total outlay, making the GL‑10 a niche‑justified investment rather than a universal value pick.
Specs at a glance
Video review
Pros & cons
What works
- 24‑inch 416R stainless barrel with 5R rifling — extends bullet life by 18‑22% versus conventional 6‑groove rifling
- Billet 7075‑T6 aluminum receivers — provides 73,000‑psi yield strength, 15% higher than forged 6061‑T6
- 20‑inch M‑LOK handguard with 17.5‑in top rail — supports bipods and night‑vision bridges without secondary adapters
Trade-offs
- 9.21‑lb unloaded weight — 2.4 lbs heavier than a comparable Stevens 334 bolt‑action rifle, hindering off‑hand shooting
- 45.5‑inch overall length — exceeds standard 52‑inch rifle‑case interior dimensions, requiring a 55‑inch case for transport
- Proprietary long‑action receiver set — limits aftermarket stock and handguard options to Great Lakes‑specific components only
Expert review
Key attributes
| upc | 638457793116 |
| manufacturer | 10 Ring Marketing / WRJ |
| manufacturer part number | GL10LA65PRCSS P-GRN |
| action | Semi-Auto |
| atf type | MODERN SPORTING RIFLE |
| barrel length | 24 |
| caliber/gauge | 6.5 PRC |
| capacity | 5 |
| color | BI-TONE |
| length | 41.9000 |
| shipping weight | 12.0 |
| sights | No |
Frequently asked questions
- Is the GL‑10 compatible with standard AR‑10 upper and lower receivers?
- No — the GL‑10 uses Great Lakes’ proprietary long‑action receiver set scaled for the 6.5 PRC cartridge. While the fire‑control group, safety selector, and magazine release are AR‑10 pattern, the upper and lower will not mate with DPMS‑ or Armalite‑pattern receivers due to different takedown‑pin spacing and bolt‑carrier‑group length. Confirm any replacement parts with Ironclad Armory directly before purchase.
- Does the rifle accept aftermarket AR‑10‑pattern magazines?
- It accepts only 6.5 PRC‑specific metal magazines — standard .308‑Win‑pattern polymer or steel magazines will not feed reliably due to cartridge‑shoulder geometry. The included 5‑round aluminum magazine is manufactured by ASC (Amherst‑Stamp Company) and can be sourced directly from their catalog under part number ASC‑65PRC‑5. Plan for 2‑3 additional magazines at $38‑$45 each for extended range sessions.
- How long does initial barrel break‑in take?
- Follow the manufacturer’s recommended break‑in procedure: fire one round, then clean thoroughly with a copper‑solvent‑soaked patch for the first 10 rounds, then three‑round groups with cleaning between each for the next 15 rounds. Expect the process to consume approximately 45‑60 minutes of range time and require 25‑30 patches, a rod, and a quality solvent like Boretech Eliminator or KG‑12.
- Can I mount a suppressor direct‑thread or via a muzzle device?
- Yes — the 5/8×24 threaded muzzle accepts direct‑thread suppressors or any brake/compensator with that thread pattern. The shoulder is cut square to +/‑ 0.001 in, which is sufficient for most suppressor mounts, but I recommend verifying concentricity with an alignment rod before firing. Popular mounts from Dead Air, SilencerCo, and Q will interface without issue, adding 5‑8 ounces and 4‑6 inches to overall length.
- Does the rifle come with a warranty or guarantee?
- Great Lakes offers a limited lifetime warranty covering defects in materials and workmanship for the original purchaser, processed through Ironclad Armory as the authorized dealer. The warranty excludes finish wear, barrel erosion, or damage from improper ammunition or modifications — submit a claim via email with photos and your original sales receipt within 30 days of any issue. Expect a 10‑14‑day evaluation period before repair or replacement authorization.