Glenfield Model A 6.5 Creedmoor 20in Threaded 4rd Moss Green
Pros & cons
What works
- Cold hammer-forged 20-inch barrel with 1:8" twist — stabilizes long 140+ grain match projectiles for precision.
- Factory 5/8"-24 threading — direct compatibility with .30 cal suppressors without $150+ gunsmithing cost.
- Adjustable trigger from 3 to 5 pounds — user-set break weight using a simple hex key included in the manual pack.
- Integral Picatinny scope base installed — eliminates $40+ aftermarket rail purchase and mounting labor.
- Weighs 6.3 lbs unloaded — 1.2 lbs lighter than a comparable wood-stocked hunting rifle for mountain carry.
Trade-offs
- Moss Green Splatter stock is fixed — no length-of-pull or comb height adjustment without $200+ aftermarket stock/chassis.
- Single 4-round magazine included — spare magazines retail for $42 each and have limited aftermarket availability.
- Matte black finish shows handling wear quickly — expect visible brass marks on the bolt and receiver after 200 rounds.
- No thread protector wrench flats — removing a carbon-locked protector requires channel-lock pliers and risk of finish damage.
Video review
Expert review
Specs at a glance
About this product
The Glenfield Model A 6.5 Creedmoor 20in Threaded 4rd Moss Green is a full-size bolt-action rifle purpose-built for precision medium-game hunting with suppressor-ready capability. This rifle combines a cold hammer-forged barrel with a straightforward, adjustable trigger system in a synthetic stock that prioritizes function over form; at this price point, it represents a focused entry into the precision rifle segment without the decorative extras found on more expensive competitors.
What is the Glenfield Model A 6.5 Creedmoor 20in Threaded 4rd Moss Green used for?
This rifle is engineered for medium-game hunting at intermediate distances, specifically for whitetail and mule deer in open terrain. The 6.5 Creedmoor cartridge and 1:8" twist barrel stabilize heavy, high-BC bullets like the 140-grain ELD-M for consistent terminal performance; hunters will appreciate the integral Picatinny rail and suppressor-ready threading that accommodates a muzzle device or sound moderator out of the box without requiring a gunsmith, something not always standard on factory hunting rifles.
How does the Glenfield Model A compare to the Stevens 334 in .308 Win?
The Glenfield Model A is better suited for shooters prioritizing ballistic efficiency and suppressor use than the the Stevens 334 Rifle. While both share similar synthetic stock platforms and 20-inch barrels, the Glenfield's 5/8"-24 muzzle threads are standard for many 6.5mm/.30 caliber suppressors, whereas some budget .308 rifles may use less common 1/2"-28 patterns; more critically, the 6.5 Creedmoor generates up to 15% less felt recoil than .308 Winchester with comparable factory hunting ammunition, making follow-up shots and prolonged range sessions less punishing.
What does it weigh and what are the dimensions?
The rifle ships at a factory weight of 6.3 pounds and an overall length of 40.5 inches from buttpad to muzzle cap. With a 20-inch barrel, the unloaded balance point sits approximately 4 inches forward of the magazine well; mounted with a standard 24-ounce scope and rings, total field-ready weight approximates 8.1 pounds—lighter than a comparable wooden-stocked rifle like some Stevens 555 Sporting models but with less inherent recoil dampening than a heavier chassis system would provide.
Who is this NOT for?
This rifle is not for a shooter needing high-volume, rapid follow-up capability or those operating in dense brush. The 4-round magazine capacity and bolt-action design limit practical rate of fire compared to semi-automatic platforms; additionally, the 40.5-inch overall length can be cumbersome in thick timber or from a ground blind where a compact 16-inch-barreled carbine would maneuver better, and the synthetic stock offers minimal adjustability for length of pull or comb height without aftermarket modification.
What's in the box?
You receive the rifle, one flush-fit 4-round detachable box magazine, a thread protector, and owner's manual—no optic, optic mounting hardware, or sling are included. The one-piece Picatinny scope base is already installed and torqued to factory spec, saving you the $35-$60 typically spent on a separate base; however, the absence of a simple bore-sighting tool or chamber safety flag is a notable omission for a rifle marketed to new precision shooters.
Is the Glenfield Model A worth it at $403.99?
Yes, at $403.99, it represents strong value specifically for a hunter seeking a suppressor-ready platform in 6.5 Creedmoor without a $700+ entry fee. You're paying for the cold hammer-forged barrel, adjustable trigger, and factory threading—features that would cost over $250 in aftermarket gunsmithing if added to a basic rifle—while accepting a basic synthetic stock and utilitarian finish; for comparison, achieving similar core specs on a comparable rifle like the Ruger American often pushes the retail price over $550 before the threading work is even considered.
Key attributes
| upc | 736676520053 |
| manufacturer | Ruger / Sturm, Ruger & Co. |
| manufacturer part number | 52005 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 20" |
| caliber/gauge | 6.5mm Creedmoor |
| capacity | 4 + 1 |
| color | Black |
| length | 46.6500 |
| model | Model A |
| number of magazines | 1 4 rd. |
| package height | 3.0 |
| package width | 9.0 |
| product type | Rifle |
| safety | Tang |
| shipping weight | 6.75 |
| sights | Picatinny Scope Base Installed |
Frequently asked questions
- Is it compatible with A-TM sound suppressors?
- Yes, the 5/8"-24 muzzle threads are a standard direct-thread interface for most .30 caliber/7.62mm suppressors, including models from A-TM, SilencerCo, and Dead Air. Always verify thread concentricity with an alignment rod before first use, and ensure the suppressor is rated for 6.5 Creedmoor pressure levels, which typically requires a full-auto rated blast baffle design from manufacturers like A-TM's Cyclone series.
- Will the magazine fit a standard AR-10 magazine pouch?
- No, the flush-fit proprietary magazine measures 3.1 inches in width and will not seat properly in standard AR-10 or PMAG pouches. You'll need a dedicated single-magazine pouch or a universal elastic retainer; direct-fit nylon carriers from Blackhawk or HSGI designed for short-action rifles like the Howa 1500 or older Savage 110 patterns are your best bet for field carry.
- How long does shipping take to an FFL?
- Standard shipping to your chosen FFL dealer typically takes 3-7 business days after order verification and compliance check. All shipments require a signed copy of the FFL's license on file before processing. Expedited 2-day air service is available for an additional $35 through UPS or FedEx, but delivery time is ultimately subject to your FFL's transfer backlog upon receipt.
- Can I return it if the barrel threading is defective?
- Yes, Ironclad Armory accepts returns within 30 days for manufacturing defects like misaligned or damaged threads, confirmed through our inspection process. You must initiate the return through our compliance team and ship the firearm via UPS or FedEx using their declared "Firearm" shipping protocol, which typically costs $65-90; we cover return shipping costs for verified defects and either replace the rifle or refund the purchase price.
- Does this work with an Atlas BT10 bipod?
- Yes, the factory-installed steel sling swivel stud up front accepts the standard Atlas BT10 and similar quick-detach bipod adapters. The synthetic stock's forend is rigid enough for bipod loading without flex, but the stud's placement 2.5 inches back from the muzzle leaves adequate clearance for a direct-thread suppressor without interfering with most bipod leg deployment.