Fierce Firearms Twisted Rival XP 7mm PRC 22-inch Bolt Rifle
About this product
The Fierce Firearms Twisted Rival XP 7mm PRC is a lightweight, precision-focused long-action bolt rifle engineered for hunters and long-range shooters who demand match-grade performance from a field-portable platform. This 6.6-pound rifle centers on a 22-inch fluted and threaded carbon steel barrel housed in a proprietary C3 Carbon Rival stock with an adjustable comb and solid carbon bedding block. It ships with a radial muzzle brake and utilizes a drop-box magazine for a 3+1 capacity, making it a purpose-built tool rather than a generalist firearm.
What is the Fierce Firearms Twisted Rival XP used for?
This rifle is used for long-range hunting and precision shooting where shot placement at extended distances under field conditions is paramount. The 7mm PRC cartridge, with its modern case design and high ballistic coefficient projectiles, is engineered for consistent supersonic flight beyond 1,200 yards, making this rifle ideal for elk, moose, or mountain goat hunting where shots can exceed 500 yards. The 22-inch barrel and carbon stock achieve a balance between velocity retention and maneuverability in thick brush or steep terrain, unlike bulkier 26-inch barreled precision rifles.
How does the Twisted Rival XP compare to the Stevens 334?
The Twisted Rival XP is better at lightweight precision for long-range hunting, while the Stevens 334 .308 is better as a durable, cost-effective general-purpose rifle. Where the Twisted Rival XP uses a full carbon composite stock, carbon bedding, and a match-grade barrel for 0.75 MOA or better accuracy, the Stevens 334 rifle features a synthetic stock and standard barrel, typically yielding 1.5-2 MOA groups. The 7mm PRC chambering also offers superior ballistics to the .308 Winchester in the Stevens 334, delivering nearly 30% more energy at 500 yards with less wind drift, but at a significantly higher cost per round and more pronounced recoil.
What does it weigh and what are the dimensions?
The Twisted Rival XP weighs 6.60 pounds (105.6 ounces) without an optic or magazine, and its overall length from muzzle brake to buttpad is 42.25 inches. The 22-inch barrel has a 5/8”-24 thread pitch for direct suppressor attachment, a 1:8-inch twist rate to stabilize heavy, long-range 7mm bullets up to 195 grains, and six longitudinal flutes that reduce weight and increase surface area for cooling. The action length is 3.715 inches to accommodate the 7mm PRC's long overall cartridge length, and the magazine well has a width of 1.125 inches.
Who is this NOT for?
This rifle is not for budget-conscious shooters, those new to long-range shooting, or anyone needing a high-volume plinking rifle. The 7mm PRC ammunition costs roughly $4.50-$6.00 per round for factory match-grade loads, making practice prohibitively expensive compared to cartridges like .308 Winchester or 6.5 Creedmoor. Furthermore, the rifle's lightweight construction amplifies felt recoil, which, even with the radial muzzle brake, is approximately 28 ft-lbs of energy—significantly more punishing than a heavier rifle in the same caliber and not ideal for developing fundamentals or extended range sessions.
What's in the box?
In the box, you receive the complete Twisted Rival XP rifle with the factory-installed radial muzzle brake torqued to 35 ft-lbs, one 3-round steel AICS-pattern drop-box magazine, and a basic owner's manual covering safety and disassembly. The rifle does not include optics, rings, a case, or a thread protector for the muzzle, a notable omission given the rifle's price point. The manual provides clear torque specs for the action screws (65 in-lbs) and scope base mounting, which is critical for maintaining the carbon bedding's zero.
Is the Twisted Rival XP worth it at $2150?
At $2150, this rifle is worth it for the dedicated hunter or precision shooter who specifically needs a sub-7-pound rifle capable of half-MOA accuracy and understands the 7mm PRC's ballistic advantages and cost trade-offs. You are paying for a fully bedded carbon stock and a match-grade barrel in a niche chambering, a combination not found in more affordable rifles like the Stevens 334. However, if your primary use is target shooting or you don't require an ultralight platform, a heavier rifle in 6.5 Creedmoor from another manufacturer will likely offer similar accuracy for less money with dramatically lower ammunition and barrel life costs.
Specs at a glance
Video review
Pros & cons
What works
- Weighs 6.60 lbs (105.6 oz) — significantly lighter than most steel-barreled precision rifles in its class.
- 22-inch fluted barrel with a 1:8" twist stabilizes long, high-BC bullets up to 195 grains for superior long-range ballistics.
- C3 Carbon Rival stock includes an adjustable comb and solid carbon bedding block for consistent, repeatable optic alignment.
- 5/8”-24 threaded muzzle allows direct suppressor attachment without adapter spacers.
Trade-offs
- Excludes a thread protector — a $15-$30 oversight requiring immediate purchase if removing the muzzle brake.
- Significant felt recoil (~28 ft-lbs) due to lightweight design, punishing for extended practice sessions.
- 7mm PRC factory match ammunition averages $5/round, making high-volume training cost-prohibitive.
- Barrel life is estimated at 1,200-1,500 rounds before accuracy degrades, a known limitation of high-velocity magnum cartridges.
Expert review
Key attributes
| upc | 853418911266 |
| manufacturer | Fierce Firearms |
| manufacturer part number | FRXP7PRC22TP |
| action | Bolt Long Action |
| barrel length | 22" |
| caliber/gauge | 7MM PRC |
| capacity | 3 + 1 |
| safety | Two-Position |
Frequently asked questions
- Is the barrel threaded for a suppressor?
- Yes, the 22-inch barrel has a 5/8”-24 thread pitch, which is the standard for many .30 caliber and magnum rifle suppressors. You must ensure your suppressor is rated for the 7mm PRC's pressure and barrel length; most reputable manufacturers like Dead Air or SilencerCo list specific caliber and minimum barrel length requirements. Direct-thread mounting is recommended over a muzzle device adapter to maintain precise alignment.
- Does it use AICS pattern magazines?
- Yes, it uses standard AICS-pattern short-action magnum magazines. The included steel magazine is a 3-round model, but aftermarket options from companies like Accurate-Mag or MDT in 5-round or 10-round configurations are compatible, provided they are specifically sized for the 7mm PRC's overall length. The magazine well has a width of 1.125 inches, so ensure any aftermarket magazine fits this dimension.
- What is the thread pitch for the muzzle?
- The muzzle thread pitch is 5/8”-24, the industry standard for most .30 caliber and magnum applications. The factory radial muzzle brake is installed with a crush washer torqued to 35 ft-lbs; to mount a suppressor, you must remove the brake, discard the crush washer, and use either a direct-thread mount or a suppressor-specific muzzle device like a Dead Air KeyMo brake. Always verify thread concentricity with an alignment rod before firing with a suppressor attached.
- How long does shipping take to an FFL?
- Standard shipping to your selected Federal Firearms License (FFL) dealer takes 3-7 business days after order processing, which is typically 1-2 business days. All firearms shipments require a verified, valid FFL on file before the item leaves our warehouse. You must contact your chosen FFL dealer beforehand to confirm they accept transfers from online retailers and inquire about their specific transfer fees, which average $25-$50.
- Can this rifle be used with a bipod?
- Yes, the carbon stock has a standard sling swivel stud at the forend designed to accept most quick-detach or attached bipods like those from Harris or Atlas. The stud is positioned 4.5 inches from the tip of the forend, providing a stable mounting point. For heavier precision bipods, ensure the combined weight does not excessively alter the rifle's balance point, which is just forward of the magazine well on this lightweight platform.