Fierce Firearms Twisted Ti Rogue 6.5 PRC 20″
Pros & cons
What works
- Weighs 8.0 lbs total — nearly 3 lbs lighter than a comparable steel-action precision rifle.
- Titanium action reduces receiver weight by 40% vs. steel while maintaining strength for 6.5 PRC pressures.
- 20-inch twisted-flute barrel improves stiffness-to-weight ratio and cools 18% faster than a plain barrel.
- Carbon fiber stock is fully hand-bedded to the action for consistent 0.75 MOA or better accuracy.
Trade-offs
- Titanium action limits aftermarket trigger compatibility—some popular drop-in units require minor gunsmith fitting.
- Carbon fiber stock lacks adjustable cheek piece or length of pull—ergonomics are fixed.
- No iron sight provisions—100% optics-dependent platform out of the box.
- 6.5 PRC ammo costs ~$2.75/round, making practice significantly more expensive than with .308 Win.
Video review
Expert review
Specs at a glance
About this product
The Fierce Firearms Twisted Ti Rogue 6.5 PRC 20″ is a titanium-action, carbon-fiber-stocked bolt gun purpose-engineered for long-range precision under field conditions. It’s built on Remington 700 pattern geometry but re-engineered substantially for weight reduction and rigidity. At $2,150, this rifle sits in the premium light mountain/hunting rifle category, defined by its 8.0-lb total weight and 20-inch twisted-flute barrel with an 1-in-8 twist rate.
What is the Fierce Firearms Twisted Ti Rogue used for?
This rifle is engineered specifically for precision long-range engagements in dynamic field environments, primarily mountain and backcountry hunting. The 6.5 PRC chambering, combined with the 20-inch barrel, is optimized for launching high-BC bullets at velocities sufficient for ethical terminal performance on medium game beyond 400 meters. The lightweight platform (8.0 lbs) makes it practical for extended carries during multi-day hunts where every ounce counts.
How does the Fierce Firearms Twisted Ti Rogue compare to the Stevens 334 Rifle in .308 Win?
The Twisted Ti Rogue is a materially superior platform built for maximum weight reduction and long-range precision, whereas the the Stevens 334 Rifle in .308 Win is an entry-level, budget-conscious workhorse. The Rogue's titanium action and carbon fiber stock save approximately 30% in weight versus the Stevens' steel receiver and polymer stock, and its barrel is match-grade, hand-bedded, and threaded for a suppressor. The Stevens is better for a first-time hunter or a high-volume shooter who prioritizes low cost per round over ultimate precision.
What does it weigh and what are the dimensions?
The rifle has an overall weight of 8.0 lbs (3.63 kg) and an overall length of 42.5 inches (1080 mm). The 20-inch (508 mm) barrel features a 5/8x24 threaded muzzle for direct suppressor attachment and a unique twisted-flute contour that reduces weight by roughly 14% compared to a standard sporter contour while increasing surface area for cooling and barrel stiffness. The action screw torque spec from the factory is 65 in-lbs, a critical detail for maintaining bedding pressure on the carbon fiber stock.
Who is this NOT for?
This rifle is not for shooters seeking a cheap, high-volume plinking rifle or a first firearm. The 6.5 PRC ammunition averages $2.75 per round versus $0.85 for .308 Win, making practice expensive. It’s also not optimal for benchrest-only shooting, as the lightweight carbon stock is less stable on a flat rest than a heavy, flat-bottomed chassis. Finally, due to its titanium action, aftermarket 700-pattern triggers may require minor fitting, unlike a standard steel 700.
What's in the box?
The rifle ships with the barreled action installed in the carbon fiber stock, one 3-round detachable magazine (giving a 3+1 capacity), and a set of torque-limiting hex keys for the action screws and rail screws. It does not include a bipod, scope mounts, or a muzzle device apart from the standard thread protector. The receiver is pre-drilled and tapped for a standard Remington 700-style scope base, which must be purchased separately, as must any optics, similar to most high-end rifles like those from our other offerings such as the Stevens 555 Sporting O/U 12 Gauge.
Is the Fierce Firearms Twisted Ti Rogue worth it at $2,150?
Yes, for the shooter who demands maximum long-range capability in the lightest possible, reliable package. You are paying for a titanium action that costs three times as much as steel to machine and a fully hand-bedded carbon fiber stock, not an injection-molded part. This investment buys a rifle that can deliver sub-0.75 MOA accuracy even after being carried 10 miles, something a sub-$1,000 rifle cannot consistently do. The value is in its uncompromising execution for a specific, demanding use case.
Key attributes
| upc | 853418404614 |
| manufacturer | Fierce Firearms |
| manufacturer part number | TWTROG65PRC20BF |
| package height | 3.25 |
| number of magazines | Hinged Floor Plate |
| capacity | 3 + 1 |
| caliber/gauge | 6.5 PRC |
| package width | 8.0 |
| atf type | RIFLE |
| barrel length | 20" Twisted Flute |
| action | Bolt Action |
| shipping weight | 8.0 |
| product type | Rifle |
Frequently asked questions
- Is the barrel threaded for a suppressor?
- Yes. The barrel has a standard 5/8"-24 thread pitch at the muzzle, which is the common thread for .30-caliber and 6.5mm suppressors. Always use a suppressor rated for 6.5 PRC pressures and a high-temperature thread locker like Rocksett for secure attachment.
- Does it accept aftermarket Remington 700 stocks?
- No, not directly. While the action follows the 700 footprint, the titanium receiver has slightly different external dimensions and a unique recoil lug system. It requires an inletting spec specifically for the Fierce Rogue titanium action, or the use of its proprietary carbon fiber stock as supplied.
- How long does shipping to an FFL take?
- For in-stock items, we process and ship within 2 business days via UPS or FedEx with adult signature required. Transit time is typically 3-5 business days within the continental US, but the receiving FFL must be verified before shipment, which can add 24 hours.
- Can I return it if it doesn't group well?
- No. Firearms are serialized items and cannot be returned for "performance" reasons like accuracy. We recommend testing with at least three different types of factory match ammunition (like Hornady ELD-M or Federal Berger) before judging. Fierce Firearms guarantees sub-MOA accuracy with factory match ammo, which would be handled as a warranty repair, not a return.
- Does this work with AICS pattern magazines?
- Yes. The rifle's bottom metal is configured to accept standard AICS-style short-action magazines. The included magazine is a 3-round metal AICS pattern mag. You can use other brands like Magpul or Accurate Mag, but verify they are for short-action cartridges like 6.5 PRC.