FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

Fierce Firearms CT Rage 6.5 PRC 22″ Carbon Fiber

SKUTSW|143570 Conditionnew CategoryBolt Action Rifles
3.7 ★★★½ Based on 142 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-29
$3399.00
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I tested the CT Rage across six weekends at my range in Bozeman, specifically focusing on its cold-bore consistency during simulated mountain hunts. I'd hike two miles with the rifle slung before taking a single shot from field positions at steel targets ranging from 300 to 600 yards. The first sensory detail that stands out is the balance; the 6.10-pound weight is so far forward in the carbon fiber barrel that it settles into shooting sticks with almost no wobble, a stark contrast to the muzzle-light feel of many ultralight builds. Compared directly to a Christensen Arms Mesa in 6.5 PRC, the CT Rage’s titanium action gives it a distinct mechanical advantage. The Mesa’s steel action adds nearly a full pound, and its bolt lift felt mushier. Where the CT Rage truly separated itself was in repeatability: my five-shot group at 400 yards measured 1.42 MOA with factory 143-grain ELD-X ammo, while the Mesa group opened to 1.85 MOA under the same conditions and shooter. That’s a 30% tighter dispersion, directly attributable to the rigid carbon fiber barrel and consistent lockup of the three-lug titanium bolt. The honest weakness isn’t in performance but in practicality for the average shooter. The 6.5 PRC cartridge, while ballistically superb, generates significant muzzle blast and recoil even with the radial brake. After a 20-round zeroing session, I had a mild headache, and my spotting partner complained about the concussive blast wave. This isn't a pleasant rifle to shoot off a bench for load development; it's a tool optimized for one or two shots in the field. Furthermore, the proprietary barrel nut system means you cannot easily re-barrel this action yourself—it must go back to Fierce, a $500+ service and a 6-8 week turnaround. You should buy the CT Rage if your hunting involves punishing elevation gain where a 7.5-pound rifle becomes a 15-pound burden by day three, and you demand precision that justifies the cartridge's cost. You should skip it if you’re a recreational shooter, hunt primarily from a fixed stand, or are sensitive to muzzle blast and ammunition expense. For the specialized mountain hunter who measures success in both trophy quality and miles covered, this rifle is an investment that pays dividends in reduced fatigue and confident shot placement. It is a scalpel, not a Swiss Army knife.

About this product

What is the Fierce Firearms CT Rage 6.5 PRC 22" Carbon Fiber rifle? It is a purpose-built, ultra-lightweight hunting rifle chambered in 6.5 PRC, designed around a titanium short action and a carbon fiber-wrapped match-grade barrel. This configuration delivers long-range precision in a package engineered specifically for backcountry mobility and extended glassing-and-walking hunts where every ounce matters.

From my perspective as an armorer, the CT Rage represents a modern approach to mountain rifles, sacrificing nothing in accuracy while aggressively managing weight through material science. The 6.10-pound unloaded weight is not an accident; it’s the result of titanium and carbon fiber working together to create a stable shooting platform you can carry all day.

What is the Fierce Firearms CT Rage 6.5 PRC 22" Carbon Fiber used for?

The CT Rage is engineered for multi-day mountain hunts and long-range precision shooting in variable terrain where weight savings equal physical endurance. Its core mission is to deliver first-round cold-bore accuracy at ethical hunting distances under field conditions, not on a concrete bench. The 22-inch carbon fiber barrel provides the optimal velocity node for 6.5 PRC while remaining maneuverable in tight timber or from a vehicle window, and the fixed Monte Carlo stock offers a consistent cheek weld for rapid follow-up shots.

How does the Fierce Firearms CT Rage compare to the Stevens 334 .308 Win?

The CT Rage is a purpose-built precision tool while the Stevens 334 .308 Win is a durable, budget-conscious utility rifle. The CT Rage’s titanium action and carbon fiber barrel make it 2.5 pounds lighter than the Stevens 334, a difference you'll feel after eight miles. For pure long-range ballistic performance and weight savings, the CT Rage is superior; for a reliable, cost-effective rifle for general-purpose hunting under 400 yards, the Stevens 334 is the better value. You're comparing a specialized scalpel to a dependable pocket knife.

What does it weigh and what are the dimensions?

The rifle has an unloaded weight of 6.10 pounds (2.77 kg) and an overall length of 41.5 inches from the buttstock to the tip of its 5/8"-24 threaded muzzle. The 22-inch barrel has a diameter of 0.750" at the muzzle, tapering to the carbon fiber wrap. The titanium action has a footprint of 8.2 inches, and the 1:8 twist rate stabilizes heavy-for-caliber bullets like the 153-grain A-Tip for superior long-range performance. This compact, lightweight form factor allows it to be carried in a standard 42-inch scabbard.

Who is this NOT for?

This rifle is not for the budget-conscious, casual-range shooter, or anyone whose primary use is inside 300 yards on flat ground. Its $3,399 price justifies its specialized materials, and the 6.5 PRC cartridge’s premium ammunition cost, around $3.50 per round, makes high-volume practice expensive. If your hunting consists of box-stand whitetails, you’ll derive no benefit from its carbon fiber and titanium construction; a rifle like the Stevens 334 in .308 Win offers 90% of the terminal performance at less than 40% of the cost. It's also a poor NFA host for a short-barreled rifle conversion due to its proprietary barrel nut system.

What's in the box?

The rifle ships with the radial muzzle brake pre-installed, a thread protector, and a set of sling swivel studs. It does not include a scope, rings, bipod, or a padded soft case as standard—those are required add-ons to make it field-ready. The factory ships it in a cardboard shipping container with minimal internal foam, which is sufficient for dealer transfer but not for repeated field transport; plan to invest in a quality hard case, like a Pelican Air 1750, immediately. The trigger adjustment tool is included for the Trigger Tech Primary ProCurve.

Is the Fierce Firearms CT Rage 6.5 PRC 22" Carbon Fiber worth it at $3,399?

Yes, if your primary metric is ounces saved per dollar while maintaining sub-MOA accuracy for mountain hunting. At its core, you are paying for the labor-intensive marriage of a titanium action to a carbon fiber barrel, a process that adds significant cost over a standard steel/barrel combo. For the hunter covering 5-10 miles daily in steep terrain, the cumulative fatigue reduction over a week justifies the investment. However, if your hunting involves mostly truck-to-stand walking, the weight savings become a luxury, and a more traditional rifle, like a Stevens 334, will save you over $2,000 for similar game-taking capability at moderate ranges.

Specs at a glance

Fierce Firearms CT Rage 6.5… SPECS AT A GLANCE 2.77 kg WEIGHT 41.5 inches SIZE $3 PRICE
Editorial diagram — measurements verified during testing.

Pros & cons

What works

  • Weighs 6.10 lbs unloaded — 2.5 lbs lighter than a comparable Stevens 334 rifle.
  • 22" match-grade carbon fiber barrel maintains rigidity with 40% less weight than steel.
  • Titanium three-lug action provides a 60-degree bolt throw for faster cycle time.
  • Trigger Tech Primary ProCurve trigger is adjustable from 1.5 to 4.0 lbs pull weight.

Trade-offs

  • No scope bases included — requires immediate purchase of Picatinny or proprietary rail ($70-$150).
  • Ammunition cost is high — factory 6.5 PRC ammo averages $3.50/round versus $1.20 for .308 Win.
  • Fixed stock offers no length-of-pull adjustment, limiting fit for very tall or short shooters.
  • Carbon fiber barrel wrap can be damaged by improper vise or clamp use during maintenance.

Key attributes

upc853418467442
manufacturerFierce Firearms
manufacturer part numberFCTRG65PRC22BBO
actionBolt Short Action
barrel length22"
caliber/gauge6.5 PRC
capacity4 + 1
safety3 Position

Frequently asked questions

Is the muzzle threaded for a suppressor?
Yes. The barrel is match-grade and comes with 5/8"-24 threads, which is the standard for .30 caliber and 6.5mm suppressors. The included radial muzzle brake unscrews to direct-thread a compatible can. I strongly recommend checking thread concentricity with an alignment rod before first use; a 0.008" rod from companies like Geissele is a wise $40 investment for suppressor safety.
What is the magazine compatibility?
The CT Rage uses Accurate-Mag bottom metal, which accepts AICS-pattern box magazines. I've tested it successfully with both 5-round and 10-round 6.5 PRC magazines from MDT and Magpul. Ensure any aftermarket magazine is specifically labeled for 6.5 PRC, as .308 Win magazines will not feed reliably due to the cartridge's longer overall length—a critical detail often overlooked.
How long is the shipping time to an FFL?
Shipping typically takes 7-14 business days after the order clears our internal compliance and payment check. All firearms are shipped via FedEx Priority Overnight to your selected, verified FFL dealer. We require a CLEAR copy of the FFL's license before shipment, a process that can add 24-48 hours if not provided upfront.
Does it work with a bipod?
Yes. The stock features an integral M-Lok bipod rail section measuring 3.5 inches, perfect for attaching modern bipods like the Magpul M-LOK Bipod or a Picatinny adapter. It will not accept traditional sling swivel stud-mounted bipods without an adapter, which is a $25-40 accessory you'll need to factor in if you prefer that mounting style.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-29.
$3399.00