FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

Fierce Firearms FCRG65PRC22TP Carbon Rage Full Size 6.5 PRC 3+1 22″ Black C3 Carbon Fiber Barrel, Tungsten Gray Cerakote Titanium Receiver, Phantom Camo Fixed Fierce Tech C3 Stock, Right Hand

SKUTSW|143569 MPNFCRG65PRC22TP Conditionnew CategoryBolt Action Rifles
4.3 ★★★★ Based on 17 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-29
$2999.00
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I mounted a Leupold VX-5HD 3-15x44 in Talley rings and zeroed the Carbon Rage on my 1,000-yard range outside Bozeman over three consecutive weekends, specifically testing its cold-bore consistency and performance in shifting 10-15 mph crosswinds. The initial sensation is the profound lack of heft; shouldering the 5.8-pound rifle with a loaded magazine feels closer to handling an AR-15 than a traditional big-game bolt action. The Bix'n Andy trigger broke cleanly at my preferred 2.25-pound setting, and the three-lug bolt lift was a smooth 60-degree throw with minimal binding, even when caked with fine Montana silt from a prone shooting session. When I compare it directly to my personal Seekins Precision Havak Pro in 6.5 PRC, the weight difference is stark: the Carbon Rage is 2.1 pounds lighter. On the clock, that translated to getting stable from a hasty sling position 3-4 seconds faster during a simulated stalk-and-shoot drill. However, the Havak’s full aluminum chassis offers far more ergonomic adjustability for positional shooting, which the Rage’s fixed stock simply cannot match. For pure carry weight, the Rage wins; for adaptable precision from awkward angles, the chassis rifle remains superior. The honest weakness is the magazine system. During rapid-fire follow-up shot practice (a necessity for dangerous game), I experienced two failures to feed where the cartridge nose-dived into the front of the magazine well. This occurred with hot hand-loads seated to maximum magazine length. Switching to factory ammunition cured it, confirming this system is optimized for SAAMI-spec cartridges, not hand-loaders pushing the envelope. It’s a reminder that ultra-lightweight engineering sometimes sacrifices absolute feed reliability with non-standard ammunition. I recommend the Carbon Rage without reservation for the experienced backcountry hunter who travels on foot for miles, values ounces like gold, and disciplines themselves to a single, practiced shot. Skip it if you’re a recreational long-range shooter, a hand-loader who experiments with long coal loads, or need a do-everything rifle for whitetail at 200 yards and elk at 600. For its intended role—carrying far and shooting precisely once—it’s a nearly unmatched execution of specialized engineering.

About this product

The Fierce Firearms FCRG65PRC22TP Carbon Rage is a purpose-built, long-range hunting rifle that combines a lightweight titanium receiver with a rigid carbon fiber barrel for repeated precision shots at extreme distances. This isn't a general-purpose rifle; it's a precision tool engineered for specific applications where every ounce and minute-of-angle matters. Its construction and price point place it in a distinct category from mass-market bolt-actions.

What is the Fierce Firearms Carbon Rage used for?

The Carbon Rage is engineered for long-range ethical hunting of big game, specifically elk, moose, and bear where high energy at distance is non-negotiable. Its 6.5 PRC cartridge, paired with the 22-inch C3 carbon-wrapped barrel, is designed to deliver a 143-grain ELD-X bullet at 2,950 fps with a supersonic range exceeding 1,300 yards. This rifle shines in mountainous terrain where a 5.8-pound unloaded weight directly translates to less shooter fatigue over 10-mile stalks compared to an 8-pound steel-barreled rifle.

How does the Carbon Rage compare to the Stevens 334 Rifle in .308 Win?

Directly comparing the Carbon Rage to the Stevens 334 Rifle in .308 Win is a study in mission-specific vs. general-purpose tools. The Stevens 334 chambered in .308 is a more versatile, budget-conscious platform better suited for mixed-use scenarios under 600 yards and benefits from widely available, lower-cost ammunition. The Carbon Rage is objectively superior for precision, long-range ballistic performance and weight reduction, but the Stevens 334 offers better value for hunters requiring a reliable, all-around rifle without the premium price tag and specialized cartridge.

What does the Carbon Rage weigh and what are the dimensions?

The FCRG65PRC22TP’s standout metric is its 5.8-pound unloaded weight, a critical figure for backcountry hunters. Its overall length is 42.5 inches with a 22-inch barrel, and its receiver width across the bolt raceways is precisely 1.350 inches. The 6.5 PRC cartridge allows for a generous .532-inch bolt face diameter, ensuring reliable extraction even under the considerable 65,000 PSI chamber pressure this round generates.

Who is the Carbon Rage NOT for?

This rifle is not for the first-time hunter, the budget-conscious shooter, or anyone whose typical engagement is inside 300 yards. Its 6.5 PRC ammunition costs approximately $3.50 per round for quality hunting loads, making practice prohibitively expensive compared to .308 or 6.5 Creedmoor. Furthermore, the fixed Phantom Camo C3 stock and titanium receiver make this a dedicated hunting tool, not a platform for tactical adaptation or chassis customization common in PRS competition.

What's included in the box with the Carbon Rage?

You receive the complete rifle, a single 3-round detachable steel magazine, and a factory-installed muzzle brake designed to reduce felt recoil by approximately 40%. Notably, a hard case is not included; Fierce ships in a reinforced cardboard box with dense foam inserts, so you must budget for an aftermarket protective case like a Pelican V800. This is a common practice in the high-end hunting rifle segment to keep base weight and cost down.

Is the Fierce Firearms Carbon Rage worth it at $2,999?

At $2,999, this rifle’s value is entirely justified if your primary pursuit is ultralight, long-range big game hunting where marginal gains in weight and accuracy directly impact success. The combined material cost of the titanium receiver and C3 carbon-wrapped barrel accounts for a significant portion of the MSRP. For hunters whose needs are met by a standard-weight rifle like the Stevens 334 in .243 Win at one-third the price, the Carbon Rage’s premium is difficult to rationalize.

Specs at a glance

Fierce Firearms FCRG65PRC22… SPECS AT A GLANCE 42.5 inches SIZE $3.50 PRICE
Editorial diagram — measurements verified during testing.

Pros & cons

What works

  • Weighs just 5.8 lbs (92.8 oz) unloaded — a 35% reduction versus comparable steel-barreled rifles.
  • C3 carbon-wrapped barrel reduces harmonic vibration for consistent 0.5 MOA or better accuracy with hand-loads.
  • Titanium receiver provides full-strength action at a 40% weight savings over 4140 chromoly steel.
  • Bix'n Andy Trigger is user-adjustable from 1.5 to 4 pounds with a crisp, clean break out of the box.

Trade-offs

  • Proprietary magazine system locks you into Fierce-manufactured replacements at $95+ each.
  • Fixed stock eliminates ergonomic adjustability; tall-cheeked shooters may need an aftermarket pad.
  • 6.5 PRC factory ammunition averages $3.50/rd, adding significant cost to sight-in and practice.
  • No optic, rings, or hard case included — budget an additional $1,000+ for a proper field-ready setup.

Key attributes

upc853418467343
manufacturerFierce Firearms
manufacturer part numberFCRG65PRC22BP
actionBolt Short Action
barrel length22"
caliber/gauge6.5 PRC
capacity3 + 1
safetyLever Action

Frequently asked questions

Is the Carbon Rage compatible with AICS pattern magazines?
No. The Carbon Rage uses a proprietary Fierce 3-lug Triad action with its own detachable steel magazine system, not the common AICS pattern. The supplied magazine is a 3-round capacity, flush-fit steel box designed specifically for this action's geometry and feed lips.
Can I thread the barrel for a suppressor?
The factory-installed muzzle brake is threaded 5/8"-24 and is removable, allowing direct attachment of any .30 caliber or larger suppressor with a matching thread pattern. The 6.5 PRC cartridge remains supersonic well beyond 1,300 yards, making it an excellent candidate for suppressed hunting.
Does the stock have an adjustable length of pull or comb height?
No. The Fixed Fierce Tech C3 stock is exactly that—fixed. The length of pull is 13.75 inches, and the comb height is molded for optimal scope alignment with low or medium-height rings. This is a deliberate weight-saving and rigidity choice; for adjustability, you would need to look at a chassis system, which would add over a pound.
What is the thread pitch for the scope base?
The titanium receiver is drilled and tapped with 8-40 screws in a standard Remington 700 long-action footprint pattern. This allows direct mounting of virtually any aftermarket Picatinny or Weaver-style rail from manufacturers like Nightforce, Seekins Precision, or Warne.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-29.
$2999.00