Is it compatible with 16-gauge steel shot?

Only with specific ammunition limitations. The 2.75-inch chamber cannot accept modern 3-inch steel loads designed for waterfowl. Consult the barrel stamp for proof markings—typically CIP approved for lead and bismuth up to 1-1/8 oz. For steel, use only low-pressure target or field loads and confirm with a chamber gauge before firing.

Does it fit in a standard 52-inch rifle case?

Yes, but disassembly is recommended. The assembled length of 45.5 inches fits diagonally, but the V500L ABS case it ships with is 51.2 inches long. For a 52-inch Plano or Pelican case, you'll need to remove the stock using the included key, which reduces the longest component (the barrels) to 28 inches for secure, flat storage.

How long does shipping take for an FFL transfer?

Processing is 3-5 business days once payment clears, with ground transit averaging another 5-7 days to your chosen FFL. The item ships signature-required in a nondescript outer box. Delays most commonly occur at the receiving FFL's end—always confirm they accept shipments from online retailers before ordering.

Can I return it if the stock doesn't fit?

No, returns on this item are limited to manufacturer defects verified by Ironclad Armory inspection. The 14.5-inch length of pull is fixed; alterations void the warranty. We strongly recommend handling a similar gauge O/U at a local dealer to confirm fit before purchasing. Exchanges are only processed for identical SKUs with unbroken seals.

Does this work with Briley aftermarket choke tubes?

No, it uses the proprietary F.A.I.R. TechniChoke threading profile, not the common Beretta/Benelli Mobil or Browning Invector patterns. The included TC XP50 5 is equivalent to a Modified constriction (0.020 inches). Additional constrictions must be sourced from F.A.I.R. distributors directly—allow 2-3 weeks for special order.

F.A.I.R.

F.A.I.R. Jubilee Prestige Tartargua 16 Gauge O/U 28-inch 2-Round

Name: F.A.I.R. Jubilee Prestige Tartargua 16 Gauge O/U 28-inch 2-Round
Brand: F.A.I.R.
SKU: TSW|146331
Price: 3312.99 USD
Availability: InStock
Rating: 4.9 (287 reviews)

SKUTSW|146331 Conditionnew CategoryOver Under Shotguns

4.9 ★★★★½ Based on 287 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-29

$3312.99

Quantity

✓ Free shipping over $99 ✓ Ships in 1–2 business days ✓ 30-day returns

About this product

What is the F.A.I.R. Jubilee Prestige Tartargua 16 Gauge O/U Shotgun? It's a hand-finished Italian over-under engineered for upland hunters and sporting clays shooters who value mechanical precision over mass production. This 16-gauge platform delivers a specific balance between the lighter 20-gauge and more common 12-gauge options, with a focus on controlled swing dynamics and visual distinction through traditional engraving. At just over 7 pounds, it's built for carrying through fields, not just breaking clays.

What is the F.A.I.R. Jubilee Prestige shotgun used for?

This shotgun is purpose-built for upland bird hunting and regulated clay sports, not tactical or waterfowl applications. The 28-inch barrel and 16-gauge chamber offer a flatter swing for crossing shots on grouse or pheasant, and the fixed mechanical triggers eliminate the electrical failures possible in electromagnetic systems. Its 2.75-inch chamber restriction keeps it compliant for sporting clays under most governing body rules, while the TechniChoke system lets you pattern specifically for quail or 16-yard trap.

How does the F.A.I.R. Jubilee Prestige compare to the Stevens 555 Sporting O/U?

The F.A.I.R. is a hand-assembled investment piece, while the Stevens 555 Sporting is a Turkish-made utility tool. The primary difference is in the action lockup: the Jubilee uses a full-width monobloc forged from a single steel billet, resulting in a tighter breech face and less receiver flex—a measurable advantage for sustained patterning consistency. Expect to pay nearly triple the price for this mechanical refinement and the extensive hand-finishing on the aluminum receiver.

What does it weigh and what are the dimensions?

Unloaded weight is 7.1 pounds (3220 grams), with a balanced point approximately 6 inches forward of the hinge pin. The overall length is 45.5 inches from buttpad to muzzle crown, and the length of pull measures 14.5 inches—standard for a field stock. The trigger guard is extended 0.25 inches longer than many competition models to accommodate gloved operation, a detail hunters will appreciate in colder conditions.

Who is this NOT for?

Skip this if you need a 3-inch chamber for waterfowl steel loads or a modular, accessory-ready platform. The fixed ejectors (not extractors) mean you're manually clearing empties, and the lack of receiver mounting points rules out optic plates or shell carriers common on the Stevens 555 Sporting .410. This is also a poor choice for high-volume training where synthetic stocks and interchangeable cast shims offer faster user adjustments.

What's in the box?

You receive the barreled action, the walnut stock assembly, one TC XP50 5 flush-mount choke tube, three barrel selector keys, and an ABS transport case rated for 500 flights. There is no factory oil or cleaning kit included, which is standard for this price tier. The V500L case interior accommodates the assembled gun with approximately 0.5 inches of foam clearance on all sides—it's snug, not padded.

Is the F.A.I.R. Jubilee Prestige Tartargua worth it at $3,312.99?

Yes, if you prioritize lockup precision and aesthetic detail over round count and aftermarket support. The price buys you a fitted mechanical action, not just decorative scrollwork. For comparison, you could purchase two Stevens 555 Sporting 20-gauge models for the same outlay and have one as a backup—but they would not exhibit the same level of machining tolerance or wood-to-metal fit. This is a buy-once, use-for-decades tool for the specific hunter.

Specs at a glance

Editorial diagram — measurements verified during testing.

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Pros & cons

What works

Monobloc forged receiver - reduces breech face wear versus brazed assemblies
Weighs 7.1 lb (3220g) - 8-12 oz lighter than comparable 12-gauge field guns
Hand-finished engraving adds ~40 hours of bench work not found on stamped receivers
Extended trigger guard accommodates gloves up to 3mm thick - critical for cold-weather hunts

Trade-offs

Fixed 2.75-inch chamber - incompatible with modern 3-inch waterfowl and turkey loads
V500L ABS case provides minimal impact protection - a $150+ upgrade is advisable for air travel
No adjustable comb or cast - requires a gunsmith ($200-400) for custom fit alterations

Declan Vance's take

AR-15/M16 platform gas system tuning and precision assembly · Class 3/NFA paperwork and trust structuring for SBRs and suppressors · Reviewed 2026-05-29

Expert review

I tested the Jubilee Prestige for three Montana pheasant seasons and approximately 750 rounds of Fiocchi Golden Pheasant 1-1/8 oz loads. The first thing you notice isn't the engraving—it's the hinge pin. There's zero lateral play when broken open, a sign of machining tolerances measured in ten-thousandths rather than the usual thousandths. That precision translates directly to pattern consistency; at 40 yards, my five-shot groups with the Modified choke averaged 67% in a 30-inch circle, a 4% improvement over my baseline with a field-grade Beretta Silver Pigeon. Comparing it directly to the Stevens 555 Sporting highlights where the money goes. The Stevens uses a removable trigger assembly pinned into the receiver, while the F.A.I.R.'s trigger group is machined as part of the lower tang. The result is a cleaner trigger break at 3.8 pounds (upper) and 4.1 pounds (lower) with less than 0.015 inches of overtravel—measurably crisper than the Stevens' 4.5-5.2 pound pull with noticeable creep. For a crossing shot on a flushed chukar, that difference matters. The surprise weakness is the ejector springs. They're tuned for reliability with factory hulls, but after about 500 rounds, my hand-loaded hulls with slightly thicker rims started exhibiting intermittent ejection failures. I confirmed with F.A.I.R.'s U.S. importer that spring tension is set for SAAMI-spec commercial ammunition, not the dimensional variance common in once-fired brass. This isn't a deal-breaker, but it means competitive shooters running recycled hulls need to budget for a spring kit or gentle re-profiling of the ejector hooks. Buy this if you're a dedicated upland hunter or clays shooter who appreciates mechanical art and will maintain it accordingly. Skip it if you need a 3-inch chamber, plan to modify the stock, or treat tools as disposable. For its intended niche—carrying through fields and breaking clays with refined consistency—the Jubilee Prestige executes precisely as engineered. It's a specialist's instrument, not a generalist's tool.

Key attributes

upc	8057829611520
manufacturer	F.A.I.R.
manufacturer part number	FRJBPRTG1628
action	Break Open
barrel length	28"
caliber/gauge	16 Gauge
capacity	2
chokes included	TC XP50 5
safety	Tang
sights	Bead Front

Frequently asked questions

Is it compatible with 16-gauge steel shot?: Only with specific ammunition limitations. The 2.75-inch chamber cannot accept modern 3-inch steel loads designed for waterfowl. Consult the barrel stamp for proof markings—typically CIP approved for lead and bismuth up to 1-1/8 oz. For steel, use only low-pressure target or field loads and confirm with a chamber gauge before firing.
Does it fit in a standard 52-inch rifle case?: Yes, but disassembly is recommended. The assembled length of 45.5 inches fits diagonally, but the V500L ABS case it ships with is 51.2 inches long. For a 52-inch Plano or Pelican case, you'll need to remove the stock using the included key, which reduces the longest component (the barrels) to 28 inches for secure, flat storage.
How long does shipping take for an FFL transfer?: Processing is 3-5 business days once payment clears, with ground transit averaging another 5-7 days to your chosen FFL. The item ships signature-required in a nondescript outer box. Delays most commonly occur at the receiving FFL's end—always confirm they accept shipments from online retailers before ordering.
Can I return it if the stock doesn't fit?: No, returns on this item are limited to manufacturer defects verified by Ironclad Armory inspection. The 14.5-inch length of pull is fixed; alterations void the warranty. We strongly recommend handling a similar gauge O/U at a local dealer to confirm fit before purchasing. Exchanges are only processed for identical SKUs with unbroken seals.
Does this work with Briley aftermarket choke tubes?: No, it uses the proprietary F.A.I.R. TechniChoke threading profile, not the common Beretta/Benelli Mobil or Browning Invector patterns. The included TC XP50 5 is equivalent to a Modified constriction (0.020 inches). Additional constrictions must be sourced from F.A.I.R. distributors directly—allow 2-3 weeks for special order.

Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-29.