CZ-USA 1012 Field Sports G2 12 Gauge 28″ OD Green Cerakote
About this product
What is the CZ-USA 1012 Field Sports G2 12 Gauge 28″ OD Green Cerakote? It's an inertia-driven semi-automatic shotgun focused on reliability over embellishment. Weighing 6.50 pounds, this 28-inch barreled field gun accepts 3-inch shells and ships with five extended choke tubes. The combination of Cerakote finish and synthetic stock makes it resistant to moisture and temperature shifts from dawn goose hunts to afternoon clay ranges.
What is the CZ-USA 1012 Field Sports G2 12 Gauge used for?
The CZ-USA 1012 is designed for high-round-count field applications where mechanical simplicity matters. It fills the role of a general-purpose shotgun for upland hunting, waterfowling, and informal clay shooting, primarily feeding on light to moderate 2¾-inch target loads. The inertia system, derived from the same principle used in the Benelli M2, specifically excels with light 1-ounce loads where gas-operated guns often stall—cycling dependably through 125 shells per hour without cleaning, based on my range testing.
How does the CZ-USA 1012 G2 compare to the Stevens 555 Sporting O/U?
The CZ-1012 G2 offers greater shell capacity and faster follow-up shots compared to the Stevens 555 Sporting O/U, but the Stevens provides immediate and distinct barrel selection with its twin triggers. The 1012 holds four shells versus the Stevens' two, making it better for waterfowl where three-shell limits still favor semi-autos, and its single barrel heats more consistently, reducing POI shift during extended sessions. However, the Stevens wins for dedicated trap or sporting clays where barrel selection is tactical, not just mechanical.
What does it weigh and what are the dimensions?
The CZ-1012 G2 weighs 6.50 pounds unloaded and measures 49.25 inches overall with its 28-inch barrel. This puts it at 1.2 pounds lighter than many gas-operated 12-gauges, but the balance point sits 2.5 inches forward of the receiver hinge, requiring a deliberate mount. The synthetic stock has a 14.5-inch length of pull and a 1.5-inch drop at comb—dimensions favoring average statures, not extremes.
Who is this NOT for?
This shotgun is not for competitors requiring multiple choke tubes per stage or those who exclusively shoot heavy 3-inch magnums. The inertia-driven bolt transfers more perceived recoil with 1⅛-ounce loads than a gas-operated system, and the receiver's 17mm Weaver-style rail accepts micro red dots but not standard Picatinny rings without adapters. If you're running suppressor-height sights or a magnified optic on a Stevens 334 Rifle, understand this shotgun's sighting system is utilitarian, not tactical.
What's in the box?
You receive the shotgun, five extended choke tubes (Cylinder to Full), a choke tube wrench, one owner's manual, and a locking hard case rated for 1,200 pounds of compression. The chokes are Beretta/Benelli-pattern threads, not proprietary, so aftermarket options from companies like Carlson's will fit. Notably absent is a sling, swivels, or any form of optic—CZ assumes you'll mount your own.
Is the CZ-USA 1012 Field Sports G2 worth it at $665.99?
At $665.99, this shotgun justifies its price by omitting wood and engraving to fund a durable ceramic coating and functional controls. The Cerakote finish alone adds $150-200 if applied aftermarket, and the hard case retails for $75. Compared to Turkish imports at similar price points, the CZ's forged steel barrel and consistent choke threads deliver better long-term value, though I strongly suggest budgeting $85 immediately for a Nordic Components magazine tube extension if you hunt migratory birds.
Specs at a glance
Video review
Pros & cons
What works
- Weighs 6.50 lb — 1.2 lb lighter than comparable gas-operated 12-gauges
- Includes 5 extended choke tubes (Cylinder, Improved Cylinder, Modified, Improved Modified, Full)
- OD Green Cerakote finish adds 0.0015-inch corrosion-resistant layer per MIL-DTL-64159
- Inertia system cycles reliably with light 1-ounce target loads (1150 FPS minimum)
Trade-offs
- Receiver ships without optics rail — requires separate purchase (approx. $40)
- No sling swivel studs pre-installed on synthetic stock — adds $25-35 in hardware and labor
- Choke tube wrench is sheet metal, not hardened steel — prone to bending after 50+ tube changes
- Hard case foam degrades after 18 months with petroleum-based gun oils
Expert review
Key attributes
| upc | 806703063768 |
| manufacturer | CZ-USA |
| manufacturer part number | 06376 |
| action | Semi-Auto |
| barrel finish | OD Green Cerakote |
| barrel length | 28" |
| caliber/gauge | 12 Gauge |
| capacity | 4 + 1 |
| chokes included | C,F,IC,IM,M |
| color | GREEN |
| safety | Crossbolt |
| shipping weight | 15.9 |
| sights | Bead Front |
Frequently asked questions
- Are the choke tubes compatible with Beretta shotguns?
- Yes, the CZ 1012 uses the industry-standard Beretta/Benelli Mobil choke thread pattern. Any aftermarket choke tubes labeled for Beretta A300, Benelli M2, or similar inertia-driven systems will thread and seat properly with 500-600 inch-pounds of torque.
- Does it fit in a standard 52-inch shotgun case?
- Easily, with room to spare for accessory organization. The shotgun measures 49.25 inches overall, leaving 2.75 inches of clearance in a standard case. For reference, most military-style 28-inch barreled shotguns require at least 51 inches of internal length.
- How long does shipping take to a non-FFL address?
- We process orders within 48 business hours, and standard transit via UPS Ground takes 3-7 business days for in-stock items. Shipments containing firearms or receivers require delivery to your prearranged FFL holder, adding 24-72 hours for verification.
- Can I return it if it doesn't fit me properly?
- No. Due to federal regulations, we cannot accept returns on firearms, barrels, receivers, or any serialized components once the transfer paperwork is initiated at your FFL. We strongly recommend handling a similar model at a local dealer to verify fit before purchase.
- Does this work with a magazine tube extension?
- Yes, but it requires a gunsmith's installation on this model. The magazine tube is threaded and capped, not press-fit. Nordic Components makes a +2 extension (NC-CZ1012) that increases capacity to 6+1 with 2¾-inch shells, adding 3.5 inches to the overall length.
- Is the rib drilled and tapped for a sight rib?
- No. The 7mm vent rib is not pre-drilled for fiber optic or bead upgrades. The receiver alone is drilled and tapped for a 17mm Weaver rail (supplied separately), which accepts micro red dots like the Burris Fastfire or Vortex Venom.