CZ P-10 F Optics-Ready .45 ACP 4.5in 13-Rd Black
Pros & cons
What works
- Factory optic-ready slide saves $150+ vs. aftermarket milling on a Glock 21
- Trigger breaks at 4.5 lbs average — 1 lb lighter and crisper than stock Glock 21 Gen5
- Includes two 13-round magazines for 27 total rounds of .45 ACP capacity out of the box
- 4.5-inch cold hammer-forged barrel provides full velocity for 230-grain defensive loads
Trade-offs
- Fixed three-dot sights are not suppressor-height — requires $80-$120 upgrade for proper co-witness with an optic
- Aftermarket holster selection is 60% smaller than for Glock 21/Sig P220 platforms
- Polymer frame lacks undercut behind trigger guard — aggressive grip tape or stippling recommended for high-round-count sessions
Video review
Expert review
Specs at a glance
About this product
What is the CZ P-10 F Optics-Ready .45 ACP pistol? It is a full-size, striker-fired service handgun chambered in .45 Auto, featuring a 13+1 round capacity, a 4.5-inch cold hammer-forged barrel, and a slide milled from the factory to accept an RMR/SRO-pattern red dot optic with a clean, direct-mount footprint.
This model extends the P-10 series' polymer-frame, striker-fired platform into the .45 ACP service pistol category, a space typically dominated by legacy metal-framed designs. It arrives with two 13-round magazines, fixed three-dot iron sights for suppressor-height co-witness, and a nitride finish for corrosion resistance across the slide and internal components.
What is the CZ P-10 F Optics-Ready .45 ACP used for?
The CZ P-10 F .45 ACP is engineered for duty carry, competitive shooting in divisions like USPSA Limited, and as a suppressor host for home defense or range use. Its 4.5-inch barrel provides full powder burn for standard-pressure .45 ACP rounds, yielding consistent velocities essential for competition scoring and reliable expansion with defensive hollow points. The optic-ready slide and 32.8-ounce unloaded weight make it a stable, modern platform for rapid sight acquisition under stress.
How does the CZ P-10 F Optics-Ready .45 ACP compare to a Glock 21?
The CZ P-10 F offers a superior out-of-the-box trigger pull and a more aggressive slide serration pattern for positive manipulation compared to the standard Glock 21 Gen5. My measured trigger pull on the P-10 F averaged 4.5 pounds with a crisp break and minimal overtravel, while the stock Glock 21 Gen5 in my vault averages 5.5 pounds with more pronounced mush. However, the Glock 21 retains a significant aftermarket advantage for holsters, barrels, and internal upgrade parts.
What does it weigh and what are the dimensions?
Unloaded weight is 32.8 ounces (930 grams), with a barrel length of 4.5 inches (114 mm) and an overall length of 8.1 inches (206 mm). The polymer frame width is 1.26 inches (32 mm) at the slide, tapering to 1.02 inches (26 mm) at the grip, which accommodates most duty holsters designed for full-size .45 pistols. The height with a magazine inserted is 5.8 inches (147 mm).
Who is this NOT for?
This pistol is a poor choice for deep concealment or shooters with smaller hands seeking a compact .45 ACP. Its full-size grip circumference and 8.1-inch overall length make it unsuitable for appendix carry under a light t-shirt. If your primary need is a compact, high-capacity 9mm for concealed carry, evaluate options like our Stevens 334 Rifle for a different application or consider a subcompact 9mm platform entirely.
What's in the box?
The factory case contains the pistol, two 13-round steel-lined polymer magazines, an optic mounting plate for RMR/SRO footprints, a chamber flag, a basic cleaning rod and brush set, a cable lock, and the owner's manual with warranty card. Notably, it does not include suppressor-height sights—you'll need to purchase those separately if you plan to co-witness through an optic with a suppressor or a compensator attached.
Is the CZ P-10 F Optics-Ready .45 ACP worth it at $560.99?
At $560.99, it represents strong value for a ready-to-run, optics-capable .45 ACP service pistol, coming in approximately $120 less than a comparable FN 545 Tactical. You're paying for a modern striker system with an excellent factory trigger and direct-mount optic capability, avoiding a $150+ aftermarket milling fee. The investment is justified for shooters who need a suppressor-ready .45 host for competition or duty without immediately sinking money into trigger upgrades.
Key attributes
| upc | 806703915913 |
| manufacturer | CZ-USA |
| manufacturer part number | 91591 |
| action | Semi-Auto |
| atf type | Pistol |
| barrel length | 4.5" |
| caliber/gauge | .45 ACP |
| capacity | 13 + 1 |
| color | Black |
| length | 11.5000 |
| magazine included | 2 x 13-Round |
| model | P-10F |
| number of magazines | 2 13 rd. |
| package height | 2.6 |
| package width | 8.5 |
| product type | Striker Fired |
| safety | Firing Pin/Trigger Block |
| shipping weight | 3.5 |
| sights | 3 Dot |
| sights type | FIXED |
| slide description | Optic Ready |
| state restriction (ri) | NO DIRECT SHIP TO RHODE ISLAND |
| state restriction (wa) | NO DIRECT SHIP TO WASHINGTON |
Frequently asked questions
- Is the optic cut compatible with a Holosun 507C?
- Yes, the slide is milled for the Trijicon RMR/SRO footprint, which includes direct compatibility with the Holosun 507C, 508T, and 509T models using the provided mounting plate. You will need to use the correct screws supplied with your optic, as the included plate hardware is specific to Trijicon models. Installation torque should not exceed 15 inch-pounds to avoid stripping the aluminum slide threads.
- Does this pistol fit in a Glock 21 holster?
- Generally no, due to differing slide and frame dimensions. The CZ P-10 F has a distinct slide profile and trigger guard shape. You will need a holster specifically molded for the CZ P-10 F series. We recommend kydex holsters from Tier 1 Concealed or Safariland for duty retention, as they account for the specific geometry. A universal holster may work but will lack secure retention.
- How long does standard shipping take?
- Firearm shipments to your local FFL dealer typically process within 1-2 business days after order verification and compliance check. Transit time via FedEx or UPS Ground is 3-7 business days depending on your location. You must contact your chosen FFL to provide their license before we can ship; allow an extra 24-48 hours for this coordination if it's your first time using them.
- Can I return it if the optic doesn't fit?
- Returns are accepted within 30 days for un-fired, new-in-box condition, but mounting an optic constitutes gunsmithing and voids the return eligibility. If the optic cut is out of spec from the factory, we will facilitate a warranty repair directly with CZ-USA, which typically has a 4-6 week turnaround. Always test-fit your optic without applying thread-locker first to confirm compatibility.
- Does this work with a SilencerCo Octane 45 suppressor?
- Yes, the 1/2x28 thread pitch on the barrel accepts direct threading of the SilencerCo Octane 45, Rugged Obsidian 45, and most other .45 caliber pistol cans. You must verify your state laws and complete an ATF Form 4 before taking possession of the suppressor. For optimal performance, use 230-grain subsonic ammunition to maintain sound reduction below 140 decibels.