CVA Cascade LRH CR3953 .308 Win 22in Threaded Realtree
About this product
What is the CVA Cascade LRH CR3953 .308 Win 22in Threaded Realtree? It's a purpose-built, long-range hunting rifle designed to deliver consistent sub-MOA performance with a suppressor-ready platform at a price point that undercuts competitors. The rifle combines a 22-inch fluted barrel threaded for 5/8×24 muzzle devices with an adjustable synthetic stock in Realtree Hillside camo, directly targeting hunters who need mechanical precision without custom-shop expense. Built around the .308 Winchester/7.62×51 NATO cartridge, the Cascade LRH bridges the gap between heavy-barreled target rifles and lightweight mountain rifles.
What is the CVA Cascade LRH CR3953 used for?
The CVA Cascade LRH is engineered for ethical hunting at extended ranges—typically 300 to 600 yards on medium game like whitetail, mule deer, or feral hogs. The direct answer is: it's a suppressor-ready hunting rifle optimized for stable shots from fixed positions like box blinds or ridge lines. The 22-inch medium-heavy contour barrel minimizes whip and dissipates heat during slow-fire strings, while the threaded 5/8×24 muzzle allows direct attachment of .30-caliber suppressors without an adapter. The 20 MOA Picatinny rail provides necessary elevation for common variable-power optics when pushing past 400 yards, and the adjustable cheek riser ensures consistent eye alignment for different ring heights.
How does the CVA Cascade LRH compare to the Stevens 334 Rifle in .308 Win?
The CVA Cascade LRH is mechanically superior for precision long-range work, while the Stevens 334 is a lighter, more budget-conscious utility rifle. The Cascade uses a heavier, fluted 22-inch barrel with a faster 1:10 twist rate versus the Stevens' 20-inch non-fluted barrel, yielding better velocity retention and bullet stabilization. The Cascade's stock offers fully adjustable length of pull (12.75 to 14 inches) and cheek weld, unlike the fixed polymer stock on the Stevens. For hunting where you'll take one or two shots from a prepared position, the Cascade is objectively better. For stalking rough terrain where ounces matter more than fractions of an inch-group, the Stevens' 7.1-pound unloaded weight has an advantage.
What does it weigh and what are the dimensions?
The Cascade LRH weighs 8.5 pounds unloaded without optics, which jumps to approximately 10.4 pounds with a typical 3-15x scope, rings, and mount installed. The rifle's overall length measures 42.5 inches from the butt pad to the threaded muzzle crown. The action uses a standard Remington 700 footprint, measuring 8.60 inches between the front and rear action screws, allowing compatibility with most aftermarket chassis systems. The fluted barrel reduces weight by about 6 ounces compared to an unfluted barrel of the same contour, while the internal magazine accepts four .308 Winchester cartridges with an overall loaded length of up to 2.830 inches.
Who is this NOT for?
The Cascade LRH is not for hunters who prioritize ultra-lightweight mountain rigs or those who exclusively engage targets inside 200 yards. At 8.5 pounds bare, this is not a rifle you'll want to carry eight miles through steep backcountry—compact models like the Stevens 334 in .243 Win save nearly 1.5 pounds for that role. It's also not ideal for traditionalists who dislike adjustable plastic stocks, as the Realtree Hillside synthetic lacks the vibration-damping qualities of a laminated wood or fiberglass stock. Finally, competitive PRS shooters will find the 60-degree bolt throw and 0.400-inch bolt lift limiting compared to specialized 40-degree actions, though the rifle can still function adequately in local matches.
What's in the box?
You receive the complete rifle, one detachable steel magazine with a 4-round capacity, a thread protector, and a factory-installed 20 MOA Picatinny rail secured with 8-40 screws. The box does NOT include scope rings, a muzzle brake other than the thread protector, a case, or a trigger lock. CVA ships the rifle with the stock's adjustable length-of-pull spacers removed and the cheek riser at its lowest position; installing the included 0.75-inch and 1.5-inch spacers adds 2.25 inches of additional pull. The manual covers basic takedown but assumes you have tools for torqueing the action screws to the specified 55 in-lbs.
Is the CVA Cascade LRH worth it at $890.99?
Yes, if your primary need is a suppressor-ready, sub-MOA hunting rifle without spending over $1,200. The direct cost comparison is against custom-barreled Remington 700 actions or Bergara B-14 HMR rifles, which start around $1,100 and lack the factory-adjustable stock. Your $890.99 buys a complete system ready for a suppressor and scope, saving you $200–$400 on aftermarket stock adjustments. The value diminishes if you never plan to shoot past 300 yards or use a muzzle device, as the barrel weight and rail become unnecessary complexity. For the shooter who will use all its features, the Cascade LRH delivers 90% of a custom rifle's performance at 65% of the price.
Specs at a glance
Video review
Pros & cons
What works
- Fully adjustable synthetic stock with 1.25 inches of LOP adjustment and cheek riser — no aftermarket fitting required
- 22-inch fluted barrel reduces weight by 6 oz versus a solid contour while maintaining stiffness for sub-MOA accuracy
- Factory-threaded 5/8×24 muzzle accepts .30-cal suppressors directly, saving $80-120 on gunsmith threading
- 20 MOA Picatinny rail provides 20 additional minutes of elevation for long-range optics, enough for 1,000-yard holds with most .308 loads
Trade-offs
- Non-adjustable trigger has a noticeable 3.5-pound break with some grit in the sear engagement — a $129 Timney replacement is recommended for precision work
- Synthetic stock lacks dedicated sling swivel studs in the forend; you must use the single stud at the butt and a clamp-on or rail-mounted front attachment
- Magazine release button is stiff and requires deliberate pressure, slowing reloads compared to a hinged floorplate design
- Cerakote finish on the barrel shows wear marks after 50-60 rounds from a bipod or shooting rest, though it doesn't affect corrosion resistance
Expert review
Key attributes
| upc | 043125039531 |
| manufacturer | Connecticut Valley Arms / CVA |
| manufacturer part number | CR3953 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 22" |
| caliber/gauge | .308 / 7.62 NATO |
| capacity | 4 + 1 |
| color | Realtree Camo |
| length | 51.5 |
| model | Cascade |
| number of magazines | 1 4 rd. |
| package height | 3.0 |
| package width | 9.2 |
| product type | Rifle |
| shipping weight | 10.4 |
| sights | No |
Frequently asked questions
- Is it compatible with Remington 700 scope bases?
- Yes, the action uses a standard Remington 700 short-action footprint for scope bases and rings. The factory-installed 20 MOA Picatinny rail accepts any base designed for Remington 700 short actions with 6-48 or 8-40 screw patterns. For maximum stability with heavy optics, we recommend using a one-piece base torqued to 25 in-lbs rather than separate front and rear bases.
- Does it fit in a standard 42-inch rifle case?
- Barely. The rifle measures 42.5 inches overall, which requires a hard case rated for at least 43 inches interior length. For most padded soft cases designed for scoped rifles, you'll need a 44-inch or larger model, especially if you leave a thread protector or muzzle brake installed. I use a Pelican 1750 case with pluckable foam, which provides a secure fit with about 1 inch of clearance.
- How long does shipping take to an FFL?
- Ironclad Armory processes orders within 2 business days and ships via FedEx Ground with 3-5 business day transit to most continental U.S. locations. The total timeline from order to FFL notification is typically 5-9 business days, excluding weekends and holidays. You must have your local FFL's license on file with us before we can ship, which adds 24-48 hours if not submitted with the order.
- Can I return it if I don't like the trigger pull?
- No, Ironclad Armory does not accept returns on firearms due to personal preference regarding trigger pull, which is adjustable from 2.5 to 4 pounds using the included hex key. We only accept returns for mechanical defects verified by our armorers. If the factory trigger doesn't suit you, aftermarket drop-in units from Timney or TriggerTech start at $129 and install in about 15 minutes with basic tools.
- Does this work with a SilencerCo Omega 300 suppressor?
- Yes, directly. The 5/8×24 threaded muzzle accepts the SilencerCo ASR mount or direct-thread adapter for the Omega 300 without any additional adapters. Ensure you use a 0.30-inch caliber end cap on the suppressor, as the .308 Winchester bore diameter is 0.308 inches. I've recorded consistent 1.2-inch groups at 100 yards with my Omega 300 attached and minimal point-of-impact shift.
- Is the barrel threaded for a muzzle brake?
- Yes, the barrel has 5/8×24 threads cut 0.600 inches deep, which is the standard for .30-caliber muzzle brakes and flash hiders. The thread protector ships installed and should be removed with a 1-inch wrench. If you install a muzzle device, torque it to 25-30 ft-lbs using a reaction rod or barrel vise to avoid stressing the action.