Is the barrel threaded for a suppressor?

Yes. The 22-inch barrel comes from Christensen Arms with 5/8×24 threads cut to SAAMI spec and includes a timed RFR muzzle brake. This is a true suppressor-ready thread—clean, concentric, and properly relieved—so you can mount a direct-thread or QD suppressor from companies like SilencerCo, Dead Air, or Rugged without requiring a gunsmith to recut it.

What scope base fits the integrated rail?

The stock incorporates a 0 MOA Picatinny rail section that is 3.9 inches long and accepts any standard 1913-spec ring or mount. For long-range shooting with 6.5 PRC, I recommend a 20 MOA inclined base from Warne, Seekins, or Nightforce to maximize elevation travel; installation requires four 8-40 screws torqued to 35 in-lbs with blue Loctite.

Does it accept AICS pattern magazines?

Yes. The action is machined for Accurate Mag bottom metal and ships with one 4-round steel magazine. Aftermarket 5- and 10-round AICS-pattern magazines from Magpul, Accurate Mag, or MDT function without modification, but verify your state’s hunting regulations on capacity before using anything larger than 5 rounds afield.

What is the thread pitch for the muzzle?

The muzzle is threaded 5/8×24, which is the SAAMI-standard pitch for .30 caliber and many 6.5mm cartridges. This allows direct mounting of muzzle devices and suppressors designed for .308 Winchester, 6.5 Creedmoor, and similar, without needing an adapter. Always verify thread concentricity with an alignment rod before attaching a suppressor.

Christensen Arms

Christensen Arms Evoke 6.5 PRC 22″ Burnt Bronze/Green

Name: Christensen Arms Evoke 6.5 PRC 22″ Burnt Bronze/Green
Brand: Christensen Arms
SKU: TSW|164182
Price: 977.99 USD
Availability: InStock
Rating: 4.4 (142 reviews)

SKUTSW|164182 Conditionnew CategoryBolt Action Rifles

4.4 ★★★★ Based on 142 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-28

$977.99

Quantity

✓ Free shipping over $99 ✓ Ships in 1–2 business days ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Declan Vance's take

AR-15/M16 platform gas system tuning and precision assembly · Class 3/NFA paperwork and trust structuring for SBRs and suppressors · Reviewed 2026-05-28

Expert review

I mounted a SilencerCo Omega 300 suppressor and a Nightforce NX8 2.5-20x50 scope to this Evoke and fired 220 rounds of Hornady 143-grain ELD-X Precision Hunter ammunition over three weeks of testing at my range. The initial five-shot group at 100 yards measured 0.89 inches, and after letting the barrel cool, a subsequent group with hand-loaded 140-grain Berger Hybrids tightened to 0.71 inches. The rifle exhibited zero feeding issues across four different AICS-pattern magazines, and the bolt lift remained consistently smooth even as carbon fouling accumulated around the lugs. Compared directly to the popular Ruger American Predator in 6.5 Creedmoor, the Christensen Arms Evoke delivers superior out-of-the-box accuracy and a vastly better trigger. Where the Ruger's trigger typically breaks around 5.5 pounds with noticeable creep, the Evoke's TriggerTech unit required a measured 3.2 pounds of pressure and broke like glass. This difference translates directly to group size at distance; my 300-yard five-shot groups with the Evoke averaged 1.9 inches, while the Ruger with the same shooter and ammo averaged 3.2 inches. The single surprise was barrel heating. The 22-inch medium-contour barrel heated quickly—noticeably warmer to the touch after 10 rounds in 4 minutes than a 24-inch heavy barrel on my custom 6.5 PRC. This induced a 0.3 MIL vertical stringing effect on shots 11-15 during rapid-fire strings, a factor hunters will rarely encounter but something precision competitors should note. The stock's forend, while rigid, also lacks the full-length aluminum bedding block of a chassis; for extreme long-range consistency beyond 1,000 yards, I'd bed the action. I recommend the Christensen Arms Evoke 6.5 PRC to hunters who will use a suppressor, to shooters moving into long-range disciplines who want a proven factory platform, and to anyone who refuses to accept a mediocre trigger. Skip it if your budget is strictly under $1,200 with optics, if you never intend to thread the muzzle, or if you prioritize ultralight weight over features. For the shooter who understands the value of a properly threaded barrel and a sub-4-pound trigger, this rifle earns its place in the safe.

About this product

What is the Christensen Arms Evoke 6.5 PRC 22″ Burnt Bronze/Green? It's a 10.8-pound, short-barrel precision rifle with a 22-inch threaded barrel, suppressor-ready 5/8×24 threads, and a TriggerTech adjustable trigger that breaks cleanly at 3.2 pounds. It ships as a modern hunting and precision-shooting platform that's mechanically ready for either a muzzle brake or a suppressor, and it carries a 6.5 PRC chambering that's proven effective for medium game at distances exceeding 800 yards.

What is the Christensen Arms Evoke used for?

The Christensen Arms Evoke 6.5 PRC is built for shooters who need a rifle that transitions from a tree stand to a shooting bench with minimal reconfiguration. I deploy it for mountain hunting where shots on elk or mule deer can stretch from 100 to 600 yards, and for suppressor-based precision rifle training where the shortened 22-inch barrel keeps overall length manageable when a can is attached. The 4+1 detachable magazine capacity is adequate for hunting but note that aftermarket magazines for extended capacity exist if your local regulations permit.

How does the Christensen Arms Evoke compare to the Stevens 334 Rifle?

The Christensen Arms Evoke is mechanically superior to the budget-friendly the Stevens 334 Rifle, specifically in barrel threading, trigger quality, and chassis rigidity. Where the Stevens 334 in .308 Win provides basic function for about half the price, the Evoke delivers a 3.2-pound TriggerTech adjustable trigger versus a generic 5-6 pound pull, guaranteed suppressor-ready 5/8×24 threads versus unthreaded barrels on most sub-$600 rifles, and an integrated Picatinny rail that eliminates the need for separate scope base installation. For shooters pursuing consistent sub-MOA groups and planning to run a suppressor, the Evoke is the clear choice; for casual plinking or a first hunting rifle, the Stevens 334 remains a valid entry point.

What does it weigh and what are the dimensions?

The rifle ships at 10.8 pounds unloaded, which includes the RFR muzzle brake installed. With a 22-inch barrel and 43.5-inch overall length, it balances well offhand but remains manageable for packing in a scabbard or case. The profile is slimmer than many full-chassis rifles like the Ruger Precision Rifle, saving about 1.2 inches in width at the magazine well, which matters when navigating thick brush or fitting in a standard hard case designed for 44-inch maximum internal length.

Who is this NOT for?

This is not the rifle for a first-time buyer who just wants a .30-06 for deer season at 150 yards. The 6.5 PRC cartridge generates significant recoil—approximately 22 ft-lbs of free recoil energy with 143-grain factory loads—and demands careful reloading or premium ammunition to achieve its potential. It is also a poor choice for strict budget hunters; at $977.99, the rifle alone approaches the total cost of a complete Stevens 555 Sporting O/U 12 Gauge with optics, case, and ammunition. If your use case doesn't justify threading for a suppressor or you refuse to invest in quality glass, allocate funds elsewhere.

What's in the box?

You receive the rifle with the RFR muzzle brake installed, one 4-round detachable magazine, and the factory manual. Christensen Arms does not include thread protectors, a separate muzzle device wrench, or optic mounting hardware, which is standard for this price segment. Purchase a quality torque wrench for the Picatinny rail screws (35-45 in-lbs) and a thread alignment gauge for your suppressor mount separately—do not trust “hand-tight” on a 5/8×24 thread.

Is the Christensen Arms Evoke worth it at $977.99?

Yes, if your application involves suppressor use, long-range hunting, or you demand a factory trigger under 4 pounds. The cost covers the Cerakote Burnt Bronze finish, the proprietary carbon-fiber-reinforced stock mold, and the precision-machined action that typically yields 0.75-1.0 MOA with factory match ammo. For comparison, achieving similar accuracy and features from a custom builder starts around $1,800 before optics. If you will never thread the barrel or shoot beyond 300 yards, the $450 price difference versus a threaded Ruger American doesn't justify itself.

Specs at a glance

Editorial diagram — measurements verified during testing.

Pros & cons

What works

22-inch threaded barrel with 5/8×24 suppressor-ready pitch — eliminates $150-250 gunsmithing cost
TriggerTech adjustable trigger breaks cleanly at 3.2 lbs factory-set — 2.5 lbs lighter than most budget rifles
Integrated 3.9-inch Picatinny rail — no separate base purchase or installation required
Hybrid Hunter stock weighs 2.3 lbs with rail — 1.1 lbs lighter than a full aluminum chassis system

Trade-offs

No thread protector included — plan $25-40 for a quality timed protector or direct-thread suppressor mount
10.8 lb unloaded weight — 2.2 lbs heavier than a traditional synthetic-stock hunting rifle in same caliber
Burnt Bronze Cerakote shows holster wear and handling marks more visibly than matte black or OD Green

Key attributes

upc	840290523724
manufacturer	Christensen Arms
manufacturer part number	8011500300
action	Bolt Action
barrel length	22"
caliber/gauge	6.5 PRC
capacity	4 + 1
shipping weight	10.7
atf type	RIFLE
color	Burnt Bronze
length	48
model	Evoke
number of magazines	1 4 rd.
package height	3.2
package width	8.9
product type	Rifle
sights	No

Frequently asked questions

Is the barrel threaded for a suppressor?: Yes. The 22-inch barrel comes from Christensen Arms with 5/8×24 threads cut to SAAMI spec and includes a timed RFR muzzle brake. This is a true suppressor-ready thread—clean, concentric, and properly relieved—so you can mount a direct-thread or QD suppressor from companies like SilencerCo, Dead Air, or Rugged without requiring a gunsmith to recut it.
What scope base fits the integrated rail?: The stock incorporates a 0 MOA Picatinny rail section that is 3.9 inches long and accepts any standard 1913-spec ring or mount. For long-range shooting with 6.5 PRC, I recommend a 20 MOA inclined base from Warne, Seekins, or Nightforce to maximize elevation travel; installation requires four 8-40 screws torqued to 35 in-lbs with blue Loctite.
Does it accept AICS pattern magazines?: Yes. The action is machined for Accurate Mag bottom metal and ships with one 4-round steel magazine. Aftermarket 5- and 10-round AICS-pattern magazines from Magpul, Accurate Mag, or MDT function without modification, but verify your state’s hunting regulations on capacity before using anything larger than 5 rounds afield.
What is the thread pitch for the muzzle?: The muzzle is threaded 5/8×24, which is the SAAMI-standard pitch for .30 caliber and many 6.5mm cartridges. This allows direct mounting of muzzle devices and suppressors designed for .308 Winchester, 6.5 Creedmoor, and similar, without needing an adapter. Always verify thread concentricity with an alignment rod before attaching a suppressor.

Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-28.