Christensen Arms Ridgeline FFT Ti 6.5 PRC 20″ Bolt-Action Rifle
Video review
Expert review
About this product
The Christensen Arms Ridgeline FFT Ti 6.5 PRC 20″ is a bolt-action hunting rifle built with a titanium, carbon-fiber, and aluminum construction that weighs just 5.30 pounds unloaded, making it one of the lightest production rifles available in this chambering. It's engineered for mountain hunters and backcountry shooters who need extreme weight reduction without sacrificing the mechanical accuracy required for ethical long-range shots on game. The 6.5 PRC chambering and 20-inch threaded barrel are specifically tuned for modern high-BC bullet performance from a shortened, suppressor-ready platform.
What is the Christensen Arms Ridgeline FFT Ti used for?
This rifle is designed for precision hunting in alpine or rugged backcountry terrain where every ounce matters. The 5.30-lb weight makes multi-day stalks feasible, while the 6.5 PRC chambering and 1:8" twist rate deliver the retained energy and stability needed for game like mule deer or elk at distances beyond 400 yards. It’s not a benchrest toy; it’s a tool built for a hunter to carry all day and then make a single, critical shot.
How does the Ridgeline FFT Ti compare to the Stevens 334 Rifle in .308 Win?
The Ridgeline FFT Ti is a purpose-built, premium lightweight rifle, while the Stevens 334 is a value-oriented, general-purpose hunting platform. You'll pay over $2,200 more for the Christensen, but you get a rifle that's approximately 3.2 pounds lighter, guaranteed Sub-MOA accuracy, and a full carbon-fiber stock versus the Stevens' injection-molded synthetic. The Stevens is better for a budget-conscious hunter who doesn't mind the heft; the Christensen is for the hunter where weight is the primary constraint.
What does it weigh and what are the dimensions?
It weighs 5.30 pounds (2.40 kg) and has an overall length of 42.50 inches (108.0 cm). The 20-inch barrel has a 5/8"-24 thread pitch for direct muzzle device or suppressor attachment, contributing to a compact profile. Unloaded and without optics, the rifle balances at a point 5.25 inches forward of the trigger guard, giving it a slightly muzzle-light feel that aids in quick shoulder-mounted target acquisition.
Who is this NOT for?
This rifle is not for budget hunters, volume shooters, or those new to precision rifle fundamentals. At $2,538.99, the investment is substantial, and the lightweight construction transmits more felt recoil than a heavier rifle like the Stevens 334 in .243 Win, making it less pleasant for extended range sessions. The 3+1 capacity is also a limitation for some competitive shooting disciplines or for hunters in areas with higher bag limits.
What's in the box?
You get the rifle with its installed Christensen Arms baffle-style muzzle brake, one 3-round AICS-pattern magazine, and the factory documentation including the Sub-MOA guarantee test target. The brake is removable with a standard 3/4" wrench, but note that the package does not include scope bases, rings, or a suppressor—those are critical, separate purchases that can add $400 to $2,000 to your total system cost.
Is the Ridgeline FFT Ti worth it at $2,538.99?
Yes, but only if your primary requirement is a certified lightweight, precision rifle right out of the box. You are paying a premium for the carbon-fiber-wrapped barrel, titanium-reinforced action, and the Sub-MOA guarantee that saves you the cost and uncertainty of a custom gunsmithing job. If you don't specifically need a rifle under 5.5 pounds, a more traditional synthetic-stocked rifle at half the price will perform 95% of the same tasks.
Specs at a glance
Pros & cons
What works
- Weighs only 5.30 lbs — 40% lighter than a standard wood-stocked hunting rifle.
- Guaranteed Sub-MOA accuracy with factory match ammo, verified by test target.
- 20" threaded barrel (5/8"-24) ready for suppressor or muzzle device mounting.
- TriggerTech trigger system provides a crisp, adjustable break out of the box.
Trade-offs
- Significant felt recoil due to light weight — noticeable with 6.5 PRC loads vs. a 7.5 lb rifle.
- Limited 3+1 magazine capacity; extra AICS mags cost $45-$65 each.
- Carbon fiber stock lacks adjustable cheek riser or length of pull — a $250-$400 upgrade for some shooters.
Key attributes
| upc | 696528091912 |
| manufacturer | Christensen Arms |
| manufacturer part number | 801-06222-00 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 20" |
| caliber/gauge | 6.5 PRC |
| capacity | 3 + 1 |
| length | 48 |
| package height | 3.7 |
| package width | 9.3 |
| product type | Rifle |
| safety | Two-Position |
| shipping weight | 7.9 |
Frequently asked questions
- Is it compatible with AICS pattern magazines?
- Yes. The Ridgeline FFT Ti uses a standard AICS-pattern short-action magazine interface. The included magazine is a 3-round unit, but aftermarket 5 or 10-round magazines from brands like Accurate-Mag or MDT will drop in without modification.
- Does the threaded barrel accept direct suppressor attachment?
- Yes, the barrel is threaded 5/8"-24, which is the standard pitch for .30 caliber and many 6.5mm suppressors. You can mount a suppressor like a SilencerCo Omega 36M or Dead Air Nomad-L directly, though you must first remove the factory-installed muzzle brake, a 30-second operation.
- How long does shipping take to an FFL?
- For an in-stock item like this, processing is 1-2 business days and ground shipping typically takes 3-5 business days to reach the continental US. The total timeline from order to your FFL's doorstep is generally 5-7 business days, not including the FFL's processing time for your background check.
- Can I return it if it doesn't meet accuracy standards?
- Christensen Arms' Sub-MOA guarantee requires you to follow their specific return process, which involves submitting a test target shot with factory match-grade ammunition. This process, handled directly with Christensen, typically takes 2-3 weeks for evaluation. Ironclad Armory does not accept returns for accuracy claims; we facilitate the warranty process.