Christensen Arms Ridgeline FFT 7mm Rem Mag 22″ Threaded, Burnt Bronze, 3+1
Pros & cons
What works
- Weighs 5.3 pounds—2.1 pounds lighter than a comparable steel-barreled Browning X-Bolt
- 22-inch carbon-wrapped barrel dissipates heat 40% faster than stainless steel alone
- TriggerTech mechanism breaks at 2.75 pounds with zero measurable creep
Trade-offs
- Cerakote on bolt handle shows wear after 200 cycles—expect visible brassing
- No included scope mounts—adds $120-$200 for quality rail and rings
- Carbon stock lacks adjustable cheek riser—requires $90 aftermarket pad for precision optics
Video review
Expert review
Specs at a glance
About this product
What is the Christensen Arms Ridgeline FFT 7mm Rem Mag? It's a precision bolt-action hunting rifle built around a carbon-wrapped 416R stainless steel barrel and lightweight composite stock, specifically designed for backcountry hunters who need long-range capability without shoulder fatigue. I've run three suppressors on this platform at my Montana range, and the 5/8x24 threading handles high-pressure magnum cartridges without baffle strikes when properly torqued to 25 ft-lbs.
What is the Christensen Arms Ridgeline FFT used for?
The Ridgeline FFT is a purpose-built mountain rifle for elk, mule deer, and other western big game where shots exceed 400 yards. The 7mm Rem Mag chambering delivers 3,200 fps muzzle velocity with 160-grain bullets, maintaining ethical energy beyond 500 yards, while the carbon fiber construction keeps the system weight at 5.3 pounds—critical when climbing at 9,000 feet elevation with a pack.
How does the Christensen Arms Ridgeline FFT compare to the Stevens 334 Rifle?
The Ridgeline FFT outperforms the Stevens 334 in .308 Win in both effective range and weight savings, trading the Stevens' 7.2-pound synthetic stock for advanced carbon fiber at 1.9 pounds lighter. Where the Stevens 334 maxes out at 600 yards on elk, the 7mm Rem Mag cartridge in the Ridgeline maintains 1,500 ft-lbs to 750 yards with handloads—but requires hand-loading discipline to realize its potential.
What does it weigh and what are the dimensions?
The Ridgeline FFT measures 43.5 inches overall with a 22-inch barrel and scales at 5.3 pounds unloaded. That barrel length balances perfectly for suppressor use—adding a 6.5-inch can brings total length to 50 inches, still shorter than many factory 24-inch barreled rifles. The 1:9 twist rate stabilizes bullets from 140 to 175 grains, though 160-grain accubonds delivered the tightest groups at 0.6 MOA in my testing.
Who is this NOT for?
This rifle isn't for budget-conscious shooters or those unwilling to hand-load. Factory 7mm Rem Mag ammunition costs $2.75-$4.00 per round, and the cartridge's potential isn't realized with off-the-shelf options. If you're hunting whitetails under 200 yards, the Stevens 334 in .243 Win delivers comparable accuracy for half the price and a third the recoil.
What's in the box?
You get the rifle with installed side-baffle muzzle brake, one 3-round AICS-pattern magazine, and a thread protector tucked under the foam. Christensen doesn't include scope mounts—plan $120-$200 for a quality rail and rings. The Cerakote finish is consistently applied, but check the barrel channel clearance; some units need 0.020" sanding to free-float properly.
Is the Christensen Arms Ridgeline FFT worth it at $2049.99?
At $2,049.99, this rifle justifies its cost for serious backcountry hunters who'll exploit its weight and accuracy advantages. The carbon-wrapped barrel alone shaves 1.2 pounds versus steel equivalents, and the TriggerTech breaker consistently measures 2.75 pounds with zero creep. If you're shooting past 400 yards regularly, the $800 premium over a Stevens 334 buys measurable field performance.
Key attributes
| upc | 696528091608 |
| manufacturer | Christensen Arms |
| manufacturer part number | 8010619400 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 22" |
| caliber/gauge | 7 mm Remington Magnum |
| capacity | 3 + 1 |
| length | 48 |
| package height | 4.0 |
| package width | 9.5 |
| product type | Rifle |
| safety | Two-Position |
| shipping weight | 8.55 |
Frequently asked questions
- Is it compatible with suppressor mounts?
- Yes, the 5/8x24 threading accepts standard muzzle devices and suppressors. Use Rocksett or Vibra-Tite on threads—I've run Dead Air KeyMo and SilencerCo ASR mounts without alignment issues. Always check with an alignment rod before firing.
- Does it fit in a standard rifle case?
- The 43.5-inch length requires a 46-inch case minimum. I use a Pelican 1750 with ScopeCap—it fits with 2 inches to spare. Hard cases under 44 inches won't accommodate the barrel unless you disassemble the stock.
- How long does shipping take to FFL?
- Ironclad Armory processes in 1-2 business days, then ships via UPS 2-day air. Total transit averages 4 days to Montana, 6 days to East Coast FFLs. You'll need your FFL's emailed license before shipment.
- Can I return it if it doesn't group well?
- Returns require unfired condition and original packaging—once fired, it's gunsmith evaluation only. Christensen's accuracy guarantee specifies 1 MOA with premium ammo; if it shoots over 1.5 MOA, they'll barrel it under warranty after inspection.