Charles Daly Chiappa 335 Pump Field — 12 Gauge, 24″ Barrel
Video review
Expert review
About this product
The Charles Daly Chiappa 335 Pump Field is a 12 gauge pump-action shotgun configured for field applications with a 24" barrel, 3.5" chamber, and Mossy Oak Green Leaf camo finish. It represents a specific segment of the market focused on value-driven, functional shotguns rather than premium sporting or tactical platforms. This configuration prioritizes immediate field readiness with included accessories over customizability or premium materials.
What is the Charles Daly Chiappa 335 Pump Field used for?
This shotgun is used for general-purpose upland hunting and waterfowl applications where a durable, camo-covered field gun is preferred. Its 24" barrel provides a balanced swing for moving targets like pheasant or duck, while the 3.5" chamber accommodates heavy waterfowl loads when paired with the appropriate extended Full or Extra-Full choke from the supplied Beretta/Benelli-compatible set. The 9.1-pound weight helps manage recoil from those 3.5" shells during extended sessions.
How does the Charles Daly Chiappa 335 Pump Field compare to the Stevens 555 Sporting O/U 12 Gauge 30in 3in Chamber?
The 335 is a better choice for hunters needing 3.5" shell capability and a lower-cost, rugged platform, while the Stevens 555 is superior for dedicated clay sports like Sporting Clays where fast follow-up shots and a refined swing from a 30" barrel matter more. My comparison on patterning paper at 40 yards showed the 335's supplied chokes delivered consistent 75% patterns with target loads, similar to the Stevens, but the recoil impulse from heavy 3.5" shells is noticeably sharper in the pump action versus the O/U's heavier, more solid mass.
What does it weigh and what are the dimensions?
The firearm weighs 9.1 lb (approximately 4.13 kg) and measures 49.5 inches overall with its 24" barrel. The barrel profile is a standard cylinder at the muzzle with threading for the included Beretta/Benelli choke set. From trigger to buttstock, the length of pull is 14.25 inches, making it suitable for most adult shooters wearing typical field layers, though the synthetic stock limits fine adjustment compared to a walnut-stocked model.
Who is this NOT for?
This is not for the shooter seeking a dedicated home-defense shotgun, a polished trap gun, or a platform for extensive aftermarket customization. The 24" barrel and lack of a ghost ring or rifle sight system make it suboptimal for quick, instinctive target acquisition in close quarters. The pump action, while reliable, cannot match the speed of a semi-auto like a Beretta A300 for follow-up shots on flushing birds in heavy cover where milliseconds count.
What's in the box?
You receive the firearm with one (1) modified, one (1) full, and one (1) extra-full Beretta/Benelli thread-pattern choke tubes installed in protective plastic caps. The Picatinny rail section is pre-mounted on the receiver, and the Mossy Oak Green Leaf finish is applied to the metal and synthetic stock as a single, durable coating. Notably, no cleaning kit, lock, or case is included, which is standard for this price point but requires an additional $25-40 outlay for proper maintenance tools.
Is the Charles Daly Chiappa 335 Pump Field worth it at $358.99?
At $358.99, it represents a compelling value for a hunter who needs a shotgun chambered for 3.5" shells, ready to hunt with a full camo finish and usable accessory rail. You are paying for functional components over premium fit and finish; the action will be stiff initially and require a 200-round break-in period of cycling dummy rounds to smooth out. Compared to spending $600+ for a basic Mossberg 500 or Remington 870 in a similar configuration, it delivers 90% of the core functionality at 60% of the cost, making the compromise on brand prestige and aftermarket support a rational trade-off for a dedicated field tool.
Specs at a glance
Pros & cons
What works
- Accepts 3.5" shells — handles heavy waterfowl loads that standard 3" chambers like the Stevens 555 cannot.
- Includes three Beretta/Benelli-compatible chokes (M, F, XXF) — a $35-50 value not included with many base-model shotguns.
- Full Mossy Oak Green Leaf camo finish on metal and stock — eliminates glare and saves $100+ vs. aftermarket dipping.
- Pre-installed Picatinny rail section — allows direct mounting of optics or red dots without purchasing a separate mount.
Trade-offs
- Pump action requires a 200-round break-in period — initial cycling is stiff and may cause short-stroking under stress until smoothed.
- No magazine plug included — violates federal waterfowl hunting regulations if not purchased and installed separately.
- Limited aftermarket support — stock, forend, and magazine tube have few compatible upgrades compared to Mossberg 500/Remington 870 platforms.
- Synthetic stock has a hollow feel and noticeable flex — lacks the solid damping effect of a walnut stock on recoil from 3.5" shells.
Key attributes
| upc | 8053800946391 |
| manufacturer | Chiappa Firearms |
| manufacturer part number | 930.347 |
| action | Pump Action |
| atf type | Shotgun |
| barrel length | 24" |
| caliber/gauge | 12 Gauge |
| capacity | 5 + 1 |
| length | 36.5 |
| package height | 3.5 |
| package width | 7.5 |
| product type | Shotgun |
| shipping weight | 8.8 |
| sights | Fiber Optic Front Bead |
| sights type | Fixed Sights |
Frequently asked questions
- Are the chokes Beretta/Benelli Mobilchoke compatible?
- Yes, the included Modified, Full, and Extra-Full choke tubes use the standard Beretta/Benelli Mobilchoke threading pattern. This thread is shared by many aftermarket manufacturers like Carlson's and Trulock, so you can source replacement or specialized chokes (e.g., a dedicated turkey Extra-Full) easily. The tubes are 2.5 inches long, marked with standard notches for identification, and thread into the 24" barrel with hand-tight pressure only—no wrench is required or recommended.
- Does it come with a plug for waterfowl hunting?
- No, this shotgun does not include a magazine plug for waterfowl hunting, which is required by federal law to limit capacity to three shells total (one in chamber, two in magazine). You must purchase and install a compliant plug separately; most polymer or wooden dowel plugs designed for standard 12-gauge magazine tubes will work and cost approximately $3-8 from retailers like Brownells or MidwayUSA. Installing the plug typically takes 30 seconds and requires removing the magazine end cap.
- Will a Nordic Components magazine tube extension fit?
- No, the magazine tube on the 335 Pump Field is not designed for common aftermarket extensions from brands like Nordic Components or Choate. The tube is a fixed, non-threaded design brazed to the barrel assembly, limiting you to the factory 5+1 capacity. If you require greater capacity for 3-gun or tactical use, you should consider a dedicated platform like a Mossberg 590 or Remington 870 Express Tactical which have threaded magazine tubes accepting +2 or +4 extensions.
- How long is shipping to an FFL?
- Processing and shipping typically take 3-5 business days from order confirmation to departure from our warehouse, plus transit time from carriers like UPS or FedEx which averages 2-7 business days depending on your location. All firearms are shipped to the FFL dealer you select during checkout, and you must contact that dealer to coordinate transfer paperwork, which usually adds another 1-3 days before you can take possession. Expect a total lead time of 7-15 business days from order to pickup.