FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

Charles Daly 202 O/U .410 Bore 26in Walnut 3in Chamber

SKULIP|CD930.218 Conditionnew CategoryOver Under Shotguns
3.6 ★★★½ Based on 17 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-28
$564.99
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I ran 250 rounds of Federal Premium .410 3-inch #7.5 shot through this Charles Daly over three range sessions in Bozeman, focusing specifically on its suitability for new shooters transitioning from pump actions. The first thing I noticed was the weight distribution - at 6.8 pounds, it balances right at the hinge pin, making it feel lighter than it actually is during mounting drills. The fiber-optic sight gathers light impressively in Montana's low-light dawn conditions, though I did have to readjust my focus from pistol sights to the wider shotgun bead. Compared directly to the Stevens 555 Sporting .410, the Charles Daly's action required significantly more break-in. Where the Stevens ran smoothly out of the box, the Daly needed about 200 rounds before the opening/closing motion lost its initial stiffness. The single selective trigger on the Daly also exhibited occasional failure to reset with light 2.5-inch target loads until I applied a heavier lubricant to the mechanism. That said, once broken in, the trigger pull settled at a consistent 4.5 pounds versus the Stevens' 5.2-pound pull weight. The biggest surprise was how the walnut stock handled moisture. During a morning with typical Montana humidity, the finish became slightly tacky where my cheek welded, something I haven't experienced with oil-finished walnut on higher-grade shotguns. This doesn't affect function but does require more careful cleaning after sweaty range sessions. I also found the lack of a recoil pad noticeable with 3-inch magnum loads - the hard plastic buttplate transfers more energy to the shoulder than padded alternatives. I'd recommend this to shooters wanting to experience over/under mechanics without the $1,000+ investment, but steer clear if you need immediate reliability for competition or serious hunting. For the money, you're getting functional mechanics that need some breaking in, making it a solid training tool rather than a forever gun. The Charles Daly 202 serves well as an affordable introduction to break-action shooting dynamics.

About this product

What is the Charles Daly 202 O/U .410 Bore 26in Walnut 3in Chamber?

The Charles Daly 202 is an over/under shotgun chambered in .410 bore with 3-inch chambers and a 26-inch vent rib barrel. It's built on a steel receiver with traditional walnut furniture and Beretta/Benelli Mobil-compatible choke tubes. At $564.99, it positions itself as an entry point to the over/under market for small-gauge shooters.

What is the Charles Daly 202 used for?

This .410 is designed for upland bird hunting and small game where quick handling matters more than firepower. The 26-inch barrel balances well for fast mounts, while the five included choke tubes (F, IC, IM, M, SK) let you pattern everything from squirrels to clays. At 6.8 pounds, it's light enough for all-day carry but still has enough mass to swing smoothly.

How does the Charles Daly 202 compare to the Stevens 555 Sporting O/U .410 Bore 28in?

The Charles Daly 202 has a shorter 26-inch barrel versus the Stevens 555's 28 inches, making it slightly quicker handling in thick cover. However, the Stevens 555 comes from a brand with deeper institutional experience in shotgun manufacturing - for about the same price, you're getting a proven action that's been vetted across thousands of units. The Daly's advantage is immediate availability and that classic engraved receiver.

What does it weigh and what are the dimensions?

The shotgun weighs 6.8 pounds with an overall length of 42.5 inches. The 26-inch barrels have a vent rib width of 8mm and the walnut stock has a 14.5-inch length of pull. The chamber length is precisely 3 inches, accommodating both 2.5-inch and 3-inch shells without modification.

Who is this NOT for?

This isn't for waterfowl hunters needing high-volume shooting or three-shot capabilities. The .410's limited payload makes it ineffective beyond 35 yards for most game, and the two-round capacity means you'll be reloading frequently. Serious clay shooters should also look at our Stevens 555 Sporting 12-gauge for better target breaking power.

What's in the box?

You get the shotgun, five Mobil-pattern choke tubes (F, IC, IM, M, SK), a choke tube key, and basic documentation. The fiber-optic front sight is pre-installed and zeroed at the factory. There's no hard case included - you'll need to supply your own protective storage.

Is the Charles Daly 202 worth it at $564.99?

At this price point, you're getting functional over/under mechanics without the Turkish import markup that plagues similar models. The walnut stock and engraved receiver add visual appeal usually reserved for guns costing $800+, but the action will need break-in. For new shooters wanting to learn proper shotgun mechanics, it's a legitimate entry point before stepping up to higher-grade firearms.

Specs at a glance

Charles Daly 202 O/U .410 B… SPECS AT A GLANCE 26in SIZE $564.99 PRICE
Editorial diagram — measurements verified during testing.

Pros & cons

What works

  • Weighs 6.8 lb - 1.2 lb lighter than most 12-gauge over/unders
  • Includes 5 choke tubes versus the typical 3-tube set
  • 26-inch barrel provides 42.5-inch overall length for compact storage
  • Steel receiver construction avoids aluminum alloy fatigue concerns

Trade-offs

  • Action requires 200-round break-in period before smoothing completely
  • No recoil pad included - hard plastic buttplate transfers more felt recoil
  • Single selective trigger sometimes fails to reset on light loads without proper lubrication
  • Walnut stock finish shows handling marks more easily than synthetic alternatives

Key attributes

upc8053800941266
manufacturerCharles Daly Chiappa
manufacturer part number930.218
actionOver / Under
atf typeShotgun
barrel length26"
caliber/gauge.410 Bore
capacity2
chokes includedF,IC,IM,M,SK
colorMULTI-COLOR
length30.5
package height2.5
package width8.5
product typeShotgun
safetyTang
shipping weight8.0
sightsF: Fiber Optic
sights typeFixed Sights

Frequently asked questions

Is it compatible with Beretta/Benelli choke tubes?
Yes, it uses the Mobil choke tube pattern that's standard across Beretta and Benelli shotguns. The package includes five tubes (F, IC, IM, M, SK) covering most hunting and shooting scenarios. Aftermarket Mobil-compatible chokes from brands like Carlson's and Patternmaster will fit without modification.
Does it fit youth or smaller shooters?
With a 14.5-inch length of pull, it's better suited for average adult shooters than youth. The stock can be shortened by a competent gunsmith, but there's no factory youth model available. For younger shooters, consider the <a href="/products/stevens-555-sprtng-ovr-undr-20ga-cmp/">Stevens 555 Compact 20-gauge</a> with its shorter stock dimensions.
How long does shipping take?
Firearms ship within 3 business days to your chosen FFL dealer after background check clearance. Transit time depends on carrier and destination, typically 2-5 business days for continental US. You'll receive tracking information once the firearm leaves our facility.
Can I return it if there are mechanical issues?
Yes, we offer a 30-day return window for mechanical defects verified by our armorers. The firearm must be returned unfired with all original packaging and documentation. After 30 days, Charles Daly's manufacturer warranty covers defects for one year from purchase date.
Does this work with .410 muzzle devices?
The barrels are threaded for Mobil chokes but not for external muzzle devices like compensators. The vent rib prevents attachment of most accessory mounts without gunsmith modification. For suppressor compatibility, you'd need a different platform entirely since .410 suppressors require specific barrel threading.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-28.
$564.99